微型集散系统通用过程控制软件包

本文给出一种新的基于ＭＣＳ－５１单片机集散系统通用过程控制软件包的设计原理及其实施方法。文中重点地阐述了微型集散系统的构在民，通用过程控制软件的自动生成，主要数据结构与程序结构，实现方法及关键技术等。本软件包是采用ＴＵＲＢＯＣ２．０版本和ＭＣＳ－５１泄编语言编程的，并通过了ＭＣＳ－５１组合软件的编译，形成了可用的目标码程序系统。     

Effect of harvesting time and fruit size on titratable acidity, soluble solid and distribution of limonin in Thai tangerine juice

The effect of fruit size and harvesting of Thai tangerine fruit ( Citrus reticulata , Blanco) at different growth stages, 8–12 months after fruit set, on the distribution of limonin in whole fruit as well as in the individual fruit parts and extracted juice was investigated. The highest limonin concentration was observed in seed, followed by albedo, flavedo, segment membrane and juice sacs in decreasing order. The limonin concentration in juice as well as in whole fruit was decreased when fruit was harvested 8–12 months of fruit set. Increasing harvesting time from 8 to 12 months showed corresponding decreases in the amount of limonin in flavedo, albedo and seed. There was a decrease in titrable acidity and increase in total soluble solid and total soluble solid/titrable acidity ratio of juice with a later than normal harvesting time. However, fruit size showed no effect on limonin content and other properties of juice extracted from tangerine.     

地面无线三维定位系统

本文介绍了一种地面无线三维定位系统,说明了其结构、功能、硬件、软件及其实现。采用信息广播机制的无线三维定位方法,实现独立网络支持下的具有分层结构的建筑区域中的移动人员的无线三维定位,可应用于大型、中型、小型等各类系统中。     

32位单片机80960KB中断系统硬件资源分析

本文主要介绍３２位单片机８０９６０ＫＢ中断系统的硬件结构及其运行机理。     

单片机系统的硬件抗干扰技术

本文讨论了单片机系统中干扰的特性和主要窜入渠道。提出应根据干扰的机理，有针对性地采取相应措施，才能得到良好的效果。文中从供电系统、过程通道、电路配置等方面讨论了硬件抗干扰的可能方法和工艺措施，并给出了相应的实用电路。     

基于单片机的皮带秤变频调速控制仪的设计与实现

介绍了皮带秤调速控制仪系统实现的原理和方法,提出了在皮带秤调速控制仪的动态跟踪问题,采用模糊-数字PID复合控制算法,既可计量也可以实时跟踪控制产量。实践表明,该控制方法理想地解决了实时跟踪问题,取得了较好的控制效果。     

UV-laser assisted Fabrication of integrated-optical Waveguides

By UV-laser-irradiation a controllable change of the refractive index of some polymers can be attained in the irradiated zone. The detailed UV-photon-induced process mechanisms have been investigated on the basis of PMMA employed as an UV-modifiable model polymer. By mask lithographic methods the UV-laser-assisted technology for the modification of the polymer optical properties enables the local increase of the refractive index and thus the fabrication of integrated-optical waveguiding elements in the surface of a planar polymer chip. These elements are relevant for the manufacturing of complex integrated-optical components. The optical and functional properties of the integrated-optical waveguides have been characterized.     

微机控制多功能晶闸管逆变弧焊电源研究

本文介绍了微机控制多功能晶闸管逆变弧焊电源的主要功能硬件及软件程序设计,微机主芯片采用了单片机 MCS—51,焊机能输出四种静特性,实现一机多用。     

WiNoC中基于Edge first算法的流量平衡设计

在无线片上网络中,无线节点拥塞以及不同子网和全局网络内的流量平衡情况对整个片上网络的通信效率有着重要的影响,为此提出了基于Edge first算法的全局流量平衡机制（GTB）。首先优化了划分有线无线数据包的机制,减少了无线节点处的拥塞;其次根据无线路由器（WR）的拥塞情况,提出Edge first路由算法平衡子网内的流量;最后在全局网络中提出了全局子网拥塞感知（GSCA）判断机制,使得长距离数据包优先从低拥塞子网通过,平衡了全局网络的流量。实验表明,该方案在可接受的硬件开销、功耗开销下,保证较低的网络延迟和较高的网络吞吐率,并且大幅的提升了网络的流量平衡性能。     

基于DSP芯片的斜齿轮插齿数控加工技术研究

国内斜齿轮加工一般采用滚齿机或者进口插齿机,由于产品体积过大和机床价格昂贵而受到限制.文章对采用DSP芯片的数控插齿加工技术进行了研究,提出了虚拟轴插补技术以及用软件实现电子齿轮差动技术,利用DSP芯片的高速处理能力进行跟踪插补,经初步试验证明该方法理论上可行,实际中可以运用.