溶胶-凝胶生物玻璃多孔材料显微结构和生物活性的扫描电镜及红外光谱分析

本文利用溶胶．凝胶法制备了CaO-P2O5-SiO，系统生物活性玻璃，并以其为原料制备了用于骨修复及骨组织工程支架的块状生物活性材料。利用体外实验方法(invitro)结合x射线衍射(XRD)、扫描电子显微镜(SEM)和傅立叶变换红外光谱分析(FTIR)技术对不同烧结工艺制备的材料结构、晶相和生物活性的影响进行了分析研究。研究表明，经800℃和1100℃烧结5min的两种材料均有硅磷酸钙Ca5(PO4)2SjO4微晶相析出。烧结温度越高，析出微晶相的体积比例越大，材料的生物活性则越低。在模拟生理溶液中碳酸羟基磷灰石(HCA)只在烧结体中的玻璃颗粒表面形成，而在其硅磷酸钙Ca5(PO4)2SiO4微晶相表面未发现HCA形成。     

Monitoring Proteolysis During Cheddar Cheese Ripening Using Two-Dimensional Gel Electrophoresis

A 2-D gel electrophoretic method, consisting of isoelectric focusing and alkaline urea-PAGE was used to monitor proteolysis during ripening (180d, 5°C and 8°C) of full- and reduced-fat Cheddar cheese. The method enabled quantifying changes in levels of peptides in cheese with good spot-resolution. Results can complement those from other analyses, especially those for determining low MW peptides. Notable effects were found for cheese composition and ripening temperature on gel pattern and on relative levels of selected proteolysis products. In both cheese varieties, most peptides reached a maximum during the first 3 ripening months and gradually disappeared as ripening advanced.     

Characterization of hollow fiber membranes in a permeator using binary gas mixtures

We have studied the CO₂/CH₄ mixed gas permeation through hollow fiber membranes in a permeator. An approach to characterize the true separation performance of hollow fiber membranes for binary gas mixtures was provided based on experiments and simulations. Experiments were carried out to measure the retentate and permeate flow rates and compositions at each outlet. The influences of pressure drop within the hollow fibers, non-ideal gas behavior in the mixture and concentration polarization were taken into consideration in the mathematics model. The calculation results indicate that the net influence of the non-ideal gas behavior, competitive sorption and plasticization yields the calculated CO₂ permeance in a mixed gas permeator close to that obtained in pure gas tests. Whereas the CH₄ permeance is higher in the mixed gas tests than that in the pure gas tests, as the plasticization caused by CO₂ dominates the permeation process. As a result, the CO₂/CH₄ mixed gas selectivity is smaller than those obtained in pure gas tests at equivalent pressures.The calculated membrane performance shows little changes with stage cut if the effect of concentration polarization is accounted for in the calculation. The integration method developed in this study could provide more accurate characterizations of mixed gas permeance of hollow membranes than other estimation methods, as our model considers the roles of non-ideal gas behavior and concentration polarization properly.     

Inter- and intra-molecular ionic interactions of polyampholyte: Carboxymethyl-2-diethylaminoethylcellulose

Carboxymethyl-2-diethylaminoethylcellulose (CM-DEAE cellulose) was prepared by etherification of carboxymethylcellulose with diethylaminoethyl chloride in a NaOH solution. The behaviour of CM-DEAE cellulose in aqueous solution was studied by viscosity and GPC measurements. The degree of substitution (DS) and existing states of DEAE substituents were examined by the use of proton NMR, and those of the CM substituents were observed with FT-IR. The results reveal that the reduced viscosity and apparent molecular size of CM-DEAE cellulose vary with the concentration of sodium chloride and changes in pH and DS. These phenomena can be explained in terms of inter- and intra-molecular ionic interactions.     

Yttrium sol–gel coating effects on the cyclic oxidation behaviour of 304 stainless steel

The present results reveal the interest of sol–gel coating technique to improve 304 steel high temperature oxidation resistance. An yttrium sol–gel coating appears to enhance the oxidation resistance during isothermal oxidation test, to decrease widely the oxide weight gain and to reduce the initial transient oxidation stage generally observed in the case of blank steels. Moreover, the experimental results confirm that yttrium sol–gel coating also plays a significant role on the cyclic oxidation behaviour of the 304 steel. In fact, the yttrium addition promotes remarkably the prolongation of the period during which the oxide scale still remains adherent to the substrate.     

弱凝胶调驱降维数值模拟方法研究

目前用于弱凝胶调驱的化学驱软件大多存在计算速度慢、数值弥散现象严重的问题,为了提高弱凝胶调驱数值模拟的速度和精度,提出了降低维数的模拟方法。利用追踪流线的方法,将弱凝胶调驱的三维渗流问题,转化为沿流线计算饱和度的一维问题,大大降低了求解饱和度方程组中方程的数目,从而提高了计算速度。利用该方法,模拟了玉门老君庙油田一个试验井区的水驱开发历史,优化了弱凝胶调驱的注入浓度、注入速度及注入体积等参数,并预测了弱凝胶调驱的动态,预测该方案可提高采收率7.6%。     

Assignment of most genes encoding major peroxisomal polypeptides to chromosomal band V of the asporogenic yeast Candida tropicalis

The peroxisomes of the asporogenic yeast Candida tropicalis contain about 20 major polypeptides (PXPs). We have isolated a number of genes encoding them; 11 POX genes encoded independent PXPs and three POY genes were likely to encode three other PXPs. To locate these genes on the chromosomes, chromosomes of C. tropicalis were separated by pulsed-field gel electrophoresis. Eight chromosomal bands were observed over the range of 1.0 Mbp (band 1) to 2.8 Mbp (band VIII); the genome size was estimated to be about 20 Mbp. Southern blot analysis showed that ten genes were on band V, three genes were on band IV, and the other gene was on band VI. Three genes gave hybridization signals of nearly equal intensity on two different chromosomal bands: POX6A and POX8B, on bands V and VII; and POX8A, on bands IV and VI. Ribosomal RNA genes also hybridized to two bands, VI and VII. Most genes assigned to only one band hybridized to two restriction fragments produced by either NotI or SfiI endonuclease. The results suggested that C. tropicalis was diploid and that restriction sites were conserved little between homologues. The three POX genes that were found on two chromosomal bands hybridized to not more than two restriction fragments, implying that the allelic genes were present on different chromosomal bands.     

Viscoelasticity of oxidized starch/low methoxy pectin mixtures in the presence of glucose syrup

The structural properties of mixtures of pectin, oxidized starch and glucose syrup were investigated using small deformation dynamic oscillation. In the absence of added calcium, preparations of low methoxy pectin with glucose syrup formed viscous solutions, which remained crystal-free at subzero temperatures. Samples of oxidized starch and glucose syrup, on the other hand, exhibited solid-like behaviour because of the crystalline nature of the amylose-like helices. Mixtures of the two polysaccharides with the co-solute clearly showed phase inversion from liquid to solid-like behaviour with increasing amounts of starch in the formulation. The transformation was reflected in the textural properties of samples, which varied from thick solutions to firm gels. The viscoelasticity of the system was modified further by the introduction of high methoxy pectin. Preparations of high methoxy pectin and glucose syrup formed rubbery gels whose amorphous nature underwent a glass transition during cooling.     

溶胶-凝胶法制备TEOS-DOS基SiO2疏水减反射膜:溶胶微结构对膜性能的影响

以乙醇为溶剂,正硅酸乙酯(TEOS,tetraethoxysilane)在氢氧化铵催化下水解缩聚为纳米尺度的无定型SiO2溶胶颗粒,二甲基二乙氧基硅烷(DDS,dimethyldiethoxysilane)在盐酸催化下水解缩聚为线状聚二甲基硅氧链.用混合溶胶在玻璃基片上旋转镀膜,然后于80℃空气气氛下热处理.实验证明通过DDS将疏水的双甲基链引入镀膜胶体,使膜兼具疏水性和减反射性能.利用激光散射粒度分析仪和电子显微镜研究了溶胶颗粒的粒度变化和聚集情况等溶胶微结构,用物理吸附仪研究了膜的孔结构,考察了热处理前后膜的疏水性和透射谱,得到了溶胶微结构与膜性能之间的关联.