Viscous behaviour of glass-forming liquids: a thermodynamic approach

The temperature dependence of the viscosity of the undercooled melts exhibits an important role in the study of nucleation, crystal growth and the glass-forming ability of materials. Several attempts have been made to study the viscous behaviour of the glass-forming melts and these investigations are mainly based on free volume theory as well as on the configurational entropy model. In the present investigation, an attempt has been made to correlate the thermodynamic parameters with the viscosity of the glass-forming melts and to study the temperature dependence of the viscosity of undercooled liquids on the basis of the free volume theory as well as on the basis of the configurational entropy model of Adam and Gibbs. The entire study is confined on the expression for thermodynamic parameters reported by the authors recently. The expression obtained has been successfully applied to study the temperature dependence of the viscosity of the metallic, molecular and oxide glass-forming liquids.     

低温下液体饱和蒸气压的测试

着重介绍了静态法测试低温下（－１００～５０℃）液体饱和蒸气压的原理及方法，给出了低温下液体全氟三乙胺饱和蒸气压的测试结果，并进行了讨论。     

Conductor design with high-Tc superconducting Bi(Pb)—2223/Ag multifilamentary tapes

With high upper critical fields, high temperature superconductors (HTSC) have been recognised as candidate materials for coil and magnet applications. High field devices, at one time or another, when operated close to their rated limits are often faced with instability problems which normally are electrical, magnetic or mechanical in nature. The determination of stability parameters, therefore, is of interest to the conductor designer which very much assists in the processing aspect of long length production of wires and tapes. Due to the morphology of the superconductor most HTSC devices made with Bi(Pb)—2223 precursor exist in tape form. Here the determination of stability parameters (for flux-jump and cryogenic stability) for multifilamentary Bi(Pb)—2223/Ag tapes are presented. Processing parameters such as intermediate deformation and filling factors have been found to play a crucial role, not only on the critical current density of the tapes but on the stability aspect in conductor design as well.     

Monolithic Catalysts with Low Noble-Metal Content for Exhaust Purification of Small Gasoline Engines

A series of low noble-metal coment monolithic catalysts for exhaust purification of small gasoline engines was investigated, and it was found that the Pt/Rh-OSM/Al2O3 （where OSM was oxygen storage material） catalyst with Ce0.5Zr0.5-MnOx（3%MnOx） OSM held low light-off temperature for CO, HC, and NO; quite wide three-way window, and outstanding thermal stability. The catalyst could efficiently comrol exhaust emission of small gasoline engines.     

Effect of Microstructure on the Accelerated Creep of 20CrMoV12‐1 and P 91 Steels

In the initial part the change of microstructure for steel X20 CrMoV 121 is discussed in terms of the distribution of carbide precipitates and its effects on accelerated creep resistance and hardness are presented. In the following, experimental results of microstructure and accelerated creep resistance are presented for the steels X20CrMoV 121 and P91 annealed for up to 8760 hours at 650°C and 750°C before the testing. A similar evolution of the distribution of carbide particles of a size above 102 nm is found for both steels, while the accelerated creep resistance is diminished much stronger for the steel X20CrMoV 121. This difference is due to a greater stability of NbC than that of VC precipitates, both related to the evolution of the chemical composition of complex chromium, molybdenum and iron carbide particles.     

金属矿山深热矿井空气温度的灰色预测

金属矿山深热矿井气温的预测计算是一个难题，本文探讨了应用灰色系统预测理论来解决这一难题的新途径，并通过实例验证了该方法的可行性和有效性。     

空气调节中加湿处理的方案选择--某商标编织车间的空调设计

本文针对散热量大 ,散湿量小并要求控制室内相对湿度的场所进行了空调方案的分析比较 ,由此选择了一种比较节能和节省投资的空调设计方案。     

微波场中光纤探头温升的研究

当把光纤温度传感器置于微波场中测温时，由于受电磁场的作用，传感头内部将有能量损耗，以致发生测温偏差。本文将传感头简化成有限长圆柱，计算出在微波场中传感头的能量损耗和温度变化。最后还分析了一种实际热色效应光纤温度传感器。     

新型模具钢012Al在深冷处理过程中的组织转变

本文利用x-射线衍射分析及复型和薄膜透射技术研究了012Al钢经淬火后在深冷处理过程中的组织转变。结果表明,淬火后的残余奥氏体在深冷处理过程中部分转变成马氏体;深冷处理使马氏体发生分解,析出超细碳化物;同时伴有形变晶孪产生。     

型钢厂试轧美标H型钢性能分析研究

分析了型钢厂试制热轧美标H型钢低温冲击韧性偏低的原因，并在此基础上提出了对生产工艺的优化与改进。