转炉入炉铁水温度低的原因分析及其对炼钢的影响

系统分析了新钢公司一钢厂转炉入炉铁水温度低的原因及铁水温度对炼钢的影响，提出了提高铁水温度的措施及转炉应对低温铁水的办法。     

Cu-Cr合金高温氧化行为分析

该文用热分析天平，结合金相、X射线衍射(XRD)、扫描电镜(SEM)和能谱(EXD)研究了Cu—Cr合金在不同温度下的氧化行为。结果表明，Cu—Cr合金在700℃-900℃氧化符合抛物线规律，其最外层氧化膜为CuO，内层为Cu2O和Cr2O3，铬有助于提高合金的抗氧化能力。     

Analytical modeling and experimental study of tensile strength of asphalt concrete composite at low temperatures

In this study, analytical modeling of the tensile strength of hot-mix asphalt (HMA) mixtures at low temperatures was developed. To do this, HMA mixtures were treated as a two-phase composite material with aggregates (coarse and fine) dispersed in an asphalt mastic matrix. A two-phase composite model, which was similar to Papanicolaou and Bakos's [J. Reinforced Plast. Compos. 11 (1992) 104] model with a particle embedded in an infinite matrix, was proposed. Unlike Papanicolaou and Bakos's model, an axial stress was introduced to the fiber end to consider the load transferred from the asphalt mastic the aggregate. Efforts were also made to consider the effect of aggregate gradation, asphalt mastic degradation, and interfacial damage between the aggregates and asphalt mastic matrix on the tensile strength of the HMA mixtures. Experimental investigations were conducted to validate the developed theoretical relations. A reasonable agreement was found between the predicted tensile strength and the experimental results at low temperatures. Parameters affecting the tensile strength of asphalt mixtures were discussed based on the calculated results.     

添加VC的TiB2基硬质材料研究

对添加VC的TiB2基硬质材料进行了研究。通过实验测定了硬度、横向断裂强度、高温强度以及耐磨性等性能，通过观察SEM照片研究了VC对TiB2基硬质材料组织结构的影响。综合各种指标，我们确定在TiB2-Fe—Mo硬质材料中VC的最佳添加量为0．5％。     

Estimating thermal stress in BIPV modules

The thermal stress on building‐integrated photovoltaic modules (BIPV) in Espoo, Finland, was studied with field‐testing of amorphous silicon modules. Based on these results, the thermal stress at two other European locations (Paris and Lisbon) was estimated. The estimation procedure entailed thermal modelling of heat transfer in the façade with meteorological data as input. The results indicate that the thermal stress on BIPV modules in Lisbon is, in this case, approximately 50% higher that in Espoo and between 80 and 200% higher than in Paris, depending on the activation energy of the degradation process. The difference in stress between a BIPV module and a free‐standing module in Espoo was 50–200%. Copyright © 2006 John Wiley & Sons, Ltd.     

钢水化学热法升温技术的研究

依据热力学原理，用计算机计算了某些元素与合金的氧化热效应。综述了各种上化学热法升温技术的应用效果。分析讨论了发热剂的类型，升温速度和热效率问题等。     

液态金属钠高温沸腾实验回路应力分析与强度计算

本文主要完成了液态金属钠高温沸腾实验回路的应力分析与计算，确定了回路高温区连接管系的布置型式和支吊架系统，是该回路总体设计的重要组成部分。     

高温超高压处理HDPE的WAXD及FT－IR研究

用ＷＡＸＤ和ＦＴ－ＩＲ对高温超高压处理前后的ＨＤＰＥ进行了研究。发现经５．０ＧＰａ的高压处理或２００℃下４．０ＧＰａ的高压同时处理后的ＨＤＰＥ分子链的化学结构未发生变化。ＨＤＰＥ晶体中（２００）面与（１１０）面衍射峰的峰高比（γ）随着压力的升高而增大，表明ＨＤＰＥ分子链在超高压作用下发生了取向排列，且升高温度更有利于这种取向排列，但当压力增大至５．０ＧＰａ及温度升高至２００℃时，γ反而大幅度下降。     

Adaptive control in a heating vessel: A comparative study

This paper presents experimental results obtained in temperature adaptive control of a heating vessel. A non-linear model of the process showed that the feed flow rate causes severe variations in time constant and process gain. An extended horizon self-tuning controller and two different model reference adaptive controllers were tested. The influence of design parameters on control performance for each algorithm was assessed. The control system was disturbed with load and setpoint changes.