聚乳酸的改性及应用进展

综述了近几年聚乳酸生物降解材料的改性进展。改性方法分为化学改性和物理改性。化学改性包括共聚、交联、表面修饰等，主要是通过改变聚合物大分子或表面结构改善其脆性、疏水性及降解速率等；物理改性主要是通过共混、增塑及纤维复合等方法实现对聚乳酸的改进。     

Water-soluble Copolymers of N-vinylpyrrolidone and Vinyl Acetate: Synthesis, Characterization, and Monomer Reactivity at High Conversions

Homogeneous copolymers of N-vinylpyrrolidone (VP) and vinyl acetate (VA) which form clear aqueous solutions were prepared by free radical polymerization in a solution of isopropanol alcohol, using 2,2-azobisisobutyronitrile as an initiator. They were characterized by FTIR, ¹H-NMR, and element analysis studies. The reactivity ratios of the monomer were computed by the Extended Kelen–Tüdós method at high conversions, using data from both ¹H-NMR and elemental analysis studies. The reactivity ratios of VP and VA in a homogenous copolymer were observed to be very different from that of a heterogeneous copolymer. Additional information was obtained by finding out the sequence length distribution for copolymers.     

HDPE新牌号树脂的研究

根据扬子石化公司开发HDPE新牌号产品的生产经验,从分子量及分子量分布与树脂性能的关系、密度对HDPE性能的影响、HDPE的共聚改性、HDPE的共混改性、添加剂与HDPE改性等5个方面讨论了HDPE新牌号产品开发的方法。     

SMAS/AM/淀粉抗温接枝共聚物的研究

研究了甲基丙烯磺酸钠(SMAS)、丙烯酰胺(AM)与淀粉接枝共聚物的合成方法，接枝反应的影响因素和热稳定性。实验结果表明，该接枝反应基本符合自由基反应的一般规律，并且其聚合产物具有明显的抗高温能力。     

聚合物纳米复合材料的研究进展

介绍了聚合物基纳米复合材料的种类及制备方法，详细介绍了聚合物／层状硅酸盐纳米复合材料的研究，包括聚合物／层状硅酸盐纳米复合材料的种类、性能及研究的新进展。     

丙烯酸改性聚氨酯的合成与性能的研究

采用聚丙烯酸酯与聚氨酯共混、以水性聚氯酯为种子乳液进行丙烯酸种子乳液聚合以及水性聚氨酯与丙烯酸接枝共聚3种方法分别得到丙烯酸改性水性聚氯酯，通过激光散射粒径仪测定乳胶粒的粒径、乳胶膜的透明性、傅里叶变换红外光谱(FTIR)结构分析以及扫描电镜(SEM)对乳胶膜结构和表面形貌进行分析。结果表明：采用种子乳液聚合反应和接枝反应所得到的丙烯酸改性水性聚氯酯乳液乳胶粒粒径比水性聚氨酯的粒径显增大，表现出良好的相容性；由种子乳液聚合和接枝聚合制备的丙烯酸改性水性聚氯酯胶膜中颗粒与颗粒之间结合紧密，表面光亮、透明。     

聚丙烯接枝马来酸酐增容聚酰胺6／聚丙烯体系吸湿性能及力学性能的研究

以聚丙烯接枝马来酸酐(PP-g-MAH)为相容剂，利用其与聚酰胺6(PA6)在共混过程中的反应增容作用，实现了与聚丙烯(PP)之间的相容性共混，改变其用量，制备了系列具有不同组成的PA6／PP合金，研究了不同组成合金材料的吸湿性能及其在干态和充分吸湿状态时的冲击强度和拉伸性能。结果表明，向PA6／PP合金体系中加入相容剂PP-g-MAH后，可以改善合金的相界面，形成相容性的合金结构，明显降低合金材料的吸湿量及吸湿速率，但进一步增大相容剂PP-g-MAH的用量时，只能明显降低合金材料吸湿过程初期的吸湿速率，不能进一步显著降低合金材料的吸湿量。在相容剂PP-g-MAH用量一定时，随着PA6／PP合金体系中PA6组分含量的提高，合金在干、湿态条件下的冲击强度、拉伸强度、断裂伸长率均呈近似线性变化。对于具有相同基本组成的合金，随着相容剂PP-g-MAFI用量的增加，材料在干、湿态条件下的拉伸强度均有提高，杨氏模量则在干态时有所提高，在湿态时影响不显著，在干、湿态时断裂伸长率以及冲击强度均没有产生显著影响。     

一种聚羧酸型高效减水剂的试验研究

采用溶液共聚合成了一种聚羧酸型高效减水剂,对合成中影响减水剂性能的各种因素进行了分析;运用正交实验法,得出了合成该减水剂最佳配方和工艺条件;并研究了该减水剂对水泥净浆性能和混凝土性能的影响。结果表明,该产品掺量少(1.2%)、分散性能好(减水率25.4%)、混凝土性能高(抗压强度比178%)、不含甲醛等有害物,是一种良好的混凝土减水剂。     

Novel electrically conductive and ferromagnetic composites of poly(aniline‐co‐aminonaphthalenesulfonic acid) with iron oxide nanoparticles: Synthesis and characterization

Nanocomposites of iron oxide (Fe₃O₄) with a sulfonated polyaniline, poly(aniline‐co‐aminonaphthalenesulfonic acid) [SPAN(ANSA)], were synthesized through chemical oxidative copolymerization of aniline and 5‐amino‐2‐naphthalenesulfonic acid/1‐amino‐5‐naphthalenesulfonic acid in the presence of Fe₃O₄ nanoparticles. The nanocomposites [Fe₃O₄/SPAN(ANSA)‐NCs] were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, elemental analysis, UV–visible spectroscopy, thermogravimetric analysis (TGA), superconductor quantum interference device (SQUID), and electrical conductivity measurements. The TEM images reveal that nanocrystalline Fe₃O₄ particles were homogeneously incorporated within the polymer matrix with the sizes in the range of 10–15 nm. XRD pattern reveals that pure Fe₃O₄ particles are having spinel structure, and nanocomposites are more crystalline in comparison to pristine polymers. Differential thermogravimetric (DTG) curves obtained through TGA informs that polymer chains in the composites have better thermal stability than that of the pristine copolymers. FTIR spectra provide information on the structure of the composites. The conductivity of the nanocomposites (～ 0.5 S cm^?1) is higher than that of pristine PANI (～ 10^?3 S cm^?1). The charge transport behavior of the composites is explained through temperature difference of conductivity. The temperature dependence of conductivity fits with the quasi‐1D variable range hopping (quasi‐1D VRH) model. SQUID analysis reveals that the composites show ferromagnetic behavior at room temperature. The maximum saturation magnetization of the composite is 9.7 emu g^?1. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

苯乙烯/丙烯酸丁酯微乳液共聚物链段分布的研究

以苯乙烯/丙烯酸丁酯(St/BA)为共聚单体,进行了微乳液聚合反应,测定了共聚物组成和共聚单体的竞聚率。由竞聚率计算了共聚物分子的链段分布,分析了共聚物分子的微观结构。