超细纤维素胶体和丙烯酰胺的接枝共聚

本文用纤维素材料经酸分解制备具有平衡聚合度（LODP）的微晶纤维素，再分散成超细纤维素胶体（准均相纤维素体系）。用扫描电镜（SEM）观察处理前后的纤维素颗粒尺寸，并比较它们和丙烯酰胺接枝共聚的反应速率、聚合转化率、接枝率、接技效率、聚丙烯酰胺支链的分子量及其分布的情况。     

新型AGR管材的性能及应用前景

新型供水管材-AGR管(亚克力共聚PVC管)，采用超微粒子丙烯酸树脂弹性体与PVC接枝共聚而成，在保持原有PVC刚性性能基础上，提高了低温冲击性能及卫生性能，可用于供水管、抗震管及其他饮料和化工流体的输送。     

气相法聚乙烯高效催化剂的进展

综述了国内外气相法聚乙烯高效催化剂研究进展概况,以及各种新型高效催化剂制备技术和性能,并对开发我国新型高效推化剂提出了看法。     

MAH接枝EPDM增韧PA66的研究

研究了MAH(马来酸酐)接枝三元乙丙橡胶(EPDM—g-MAH)对尼龙66(PA66)的增韧作用。利用SEM(扫描电镜)观察了共混体系的微观形貌(形态结构)，并运用小角激光散射(SALS)方法研究了EPDM的加入对PA66结晶性能的影响。结果表明，未接枝的EPDM与PA66的相容性很差，而EPDM—g—MAH与PA66相容性明显增加，EPDM-g—MAH粒子均匀分散在PA66中，共混体系力学性能有很大提高。随着EPDM—g—MAH用量的增加，PA66球晶尺寸变小，共混体系界面结合更加紧密。     

Synthesis of polyethylene oxide end‐capped with perfluoroalkyl groups/polystyrene prototype brushes

Polystyrene (PS)/poly(ethylene oxide) (PEO) prototype brushes were prepared by alternating free‐radical copolymerization of methacryloyl‐terminated PS and α‐vinylbenzyl‐ω‐hydroxy or α‐vinylbenzyl‐ω‐perfluoroalkyl (R_f) PEO macromonomers with the addition of Lewis acid (SnCl₄). It was found from their dilute‐solution properties that PS/PEO end‐capped with R_f (PBR_f), and PS/PEO having OH groups at terminal ends (PBOH) prototype brushes formed a single molecule in benzene and aggregates in chloroform, respectively. However, the brush PBOH formed a single molecule in N,N‐dimethylformamide. Such aggregation behaviors seemed to be caused by the interaction between hydroxy groups of PEO chain ends. The brush PBOH was also converted into PBR_f‐type brush by chemical modification, using corresponding acid chloride. The substitution of R_f groups was ～70% due to slipping of terminal hydroxy groups into PEO internal domains. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 772–778, 2006     

硅疏水改性聚胺阻垢剂的制备及其性能

用γ-缩水甘油醚氧丙基三甲氧基硅烷(KH560)、1-氯辛烷对低相对分子质量聚乙烯亚胺(PEI)进行疏水接枝改性,得到了含硅疏水改性聚胺阻垢剂。通过FTIR、TG、粒径分析、Zeta电位测试等分析改性后聚胺阻垢剂的结构与性能。结果表明,改性后产物热稳定性提高、黏度增大、表面张力降低、溶液粒径增大。将改性聚胺阻垢剂用于分散铝硅酸钠颗粒,对处理前后的颗粒进行红外光谱表征,并通过对悬浮分散液进行稳定性、颗粒沉降等测试,评价聚胺阻垢剂的阻垢分散性能并初步讨论其分散机理。当m(PEI, M_w=10000)∶m(KH560)∶m(1-氯辛烷)=10∶2∶0.5,反应时间6 h,反应温度75℃时,合成的阻垢剂分散性能最佳。当结疤的质量浓度为30 g/L时,悬浮液颗粒沉降速度达到最低值0.047 cm/d,沉降速率减小程度达到94.8%,分散性显著提高。经过改性后的PEI在氧化铝工业生产中具有高效的阻垢作用,可通过在工厂进行条件优化,进一步替代传统的强酸型阻垢剂,减小管道腐蚀程度,降低能耗。     

Lewis酸存在下的自由基共聚合——Ⅰ.GeCl_4与BCl_3存在下的乙酸乙烯酯与丙烯酸交替共聚

乙酸乙烯酯(VAc)与丙烯酸(AA)在GeCl_4及BCl_3存在下通过自由基聚合可得到交替共聚物。对GeCl_4体系,聚合反应速率正比于[引发剂]~(0.5)。当VAc/AA=1:1(mol比)时有最大反应速率。CCl_4对本聚合反应无链转移作用。通过紫外光谱分析可证实VAc及AA均与GeC\(?)生成络合物;ESR分析表明,络合AA自由基较未络合AA有较强的阳离子特性,交替共聚的原因可能与络合AA自由基及活化单体络合物二者有关。     

Rheological study of poly(ethylene glycol)/poly(N‐isopropylacrylamide‐co‐2‐acrylamido‐2‐methylpropanesulphonic acid) semiinterpenetrating network formation

The formation of a series of semiinterpenetrating network (SIPN) hydrogels made by free‐radical copolymerization of N‐isopropylacrylamide (NIPA) and 2‐acrylamido‐2‐methylpropanesulphonic acid (AMPS) with varying comonomer mole ratios, crosslinked with N,N′‐methylene‐bisacrylamide (MBAA) in the presence of poly(ethylene glycol) (PEG) with average molecular weight 6,000 g mol^?1 was studied via determination of complex viscosity, η*, using plate–plate rheometry. The isothermal time dependence of η* at various temperatures or the variation of η* with temperature of pregel solutions was utilized to detect the onset of gelation. The SIPN systems were compared with the corresponding gels made under the same conditions in the absence of PEG. The copolymer mainchain composition has a major effect on the time or temperature for onset of gelation and in particular gelation appears to be inhibited to some extent by MBAA when the AMPS/NIPA mole ratio in the pregel solution exceeds 0.5. The presence or absence of PEG in pregel solutions has a lesser effect on gelation. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2083–2087, 2004     

Kinetic study of the curing behavior of bismaleimide modified with diallylbisphenol A

The curing kinetics of bismaleimide modified with diallylbisphenol A were investigated for different ratios of 1,1′‐(methylene di‐4,1‐phenylene) bismaleimide and diallylbisphenol A with differential scanning calorimetry. Multiheating‐rate and isothermal methods were used to study the kinetics of the curing process. The results indicated that the activation energy changed with the extent of conversion. The activation energy obtained by the multiheating‐rate method was higher than that obtained by the isothermal method. Two kinetic models (autocatalytic and nth‐order) were successfully used to model the curing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2229–2240, 2003     

Synthesis and chain extension of nitroxide‐terminated styrene–maleimide copolymers

Thermal radical copolymerization of styrene (S) and maleimide (MI) at 125°C in diglyme in the presence of 2,2,6,6‐tetramethylpiperidin‐1‐yloxyl radical (TEMPO) was studied. Mole fractions of maleimide in the feed, F_MI, varied in the range 0.1–0.9. A quasiliving reaction process proceeded yielding copolymers with a low polydispersity (M_w/M_n = 1.17–1.41). The found azeotropic composition, (F_MI)_A = 0.46, did not differ substantially from that (0.5) in the conventional radical S‐MI copolymerization. At a higher conversion or MI content in the feed, deactivation of the copolymer chains occurred. The obtained TEMPO‐terminated S‐MI copolymers readily initiated polymerization of styrene; chain extension of the macroinitiators took place, giving poly(S‐co‐MI)‐block‐poly(S) diblock copolymers. The synthesized copolymers containing S and MI units were characterized by elemental analysis, NMR spectroscopy, size‐exclusion chromatography, and differential scanning calorimetry. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1863–1868, 2004