Advances in titanium metal injection molding

The approaches to production of titanium powder injection molded parts are reviewed. Historically, oxygen levels have been too high for structural use (particularly with the Ti-6Al-4V alloy). However, recent advances in starting powders, binders and sintering facilities now allow oxygen levels in the Ti-6Al-4V alloy to be controlled to about 0.2 wt.% oxygen. This should result in significant expansion of the titanium PIM market place into aerospace, automobiles, surgical instruments, dentistry, communication devices (such as computers and cell phones), knives and guns. __________ Translated from Poroshkovaya Metallurgiya, Vol. 46, No. 5–6 (455), pp. 118–125, 2007.     

异型材挤出口模内的流动模拟

本文根据挤出机理，对口模内的流动行为进行适当的简化和假定，建立了挤出口模内流动分析的数学模型，并采用横截面／假想区域法实现了复杂异型材挤出口模内的数值模拟，数值分析结果与三维有限元解和解析解的对比，取得了满意的效果。     

DETECTOR: A knowledge-based system for injection molding diagnostics

A knowledge-based system (KBS) for diagnosis of multiple defects in injection molding is presented. The general scheme for knowledge representation based on fuzzy set theory has been shown useful in representing inexact and incomplete information for developing the KBS. An optimality criterion is created for selecting a simple and best cover to explain the given problem. An efficient search algorithm for finding such cover is also discussed.     

注射坯成形质量与尺寸精度的控制模型

注射坯的尺寸精度反映注射坯质量的好坏，并对控制其后脱脂和烧结过程缺陷和最终产品尺寸精度起着很关键的作用。文章基于烧结收缩各向同性的前提下，提出了通过注射坯质量偏差控制注射坯尺寸精度和注射坯质量的数学模型，并在实验中验证了这一模型的正确性。     

剪切变形方向特征对高纯铝箔轧制织构的影响

运用取向分布函数(ODF)研究了每个轧制道次的剪切变形特征对高纯铝箔轧制织构的影响.提出用中性角的相对大小来量化轧制剪切变形作用方向改变的位置,运用Taylor晶体塑性变形理论模拟计算了中性角的相对大小对轧制织构演变的影响.实测与模拟的轧制织构特征表明:中性角靠近轧制变形区的中心位置有利于形成{001}<110>剪切织构,从而证实了除剪切变形的程度外,剪切变形方向改变的位置也是影响高纯铝箔轧制织构的重要因素.     

基于CAE技术的汽车前保险杠成型工艺优化研究

介绍了利用CAE技术优化汽车保险杠的浇口设置,在优化方案的基础上,结合经验设计冷却系统,通过正交试验的方式确定保险杠成型工艺参数对翘曲变形的影响程度,得出最佳的工艺参数组合,用以指导生产实践。     

用气冲气推成形触头造型机制造电机壳铸型的试验研究

扼要介绍了用气冲气推成形触头造型机制造电机壳铸型的成型过程及其实砂效果,试验结果表明,在工作气压为0,4￣0.45MPa的条件下,气冲气推成形触头造型机对电机壳类铸型的紧实,实砂效果十分理想,砂型紧实度高而且均匀。     

Characterization of molecular orientation in injection–stretch–blow‐molded poly(ethylene terephthalate) bottles by means of external reflection infrared spectroscopy

The molecular orientation at the outer surface of injection–stretch–blow‐molded bottles made from poly(ethylene terephthalate) was characterized and quantified by means of front‐surface reflection infrared spectroscopy based on a method developed previously. Results were obtained for two different bottle shapes (cylindrical and rectangular) molded at different injection mold temperatures (16, 38, and 60°C). For the cylindrical bottles, the preferred molecular chain orientation was found to be in the axial direction, with the Hermans orientation function near 0.3 for all three mold temperatures. For the less symmetrical rectangular bottles, a significant difference was observed between the large and small faces. For the large face, the orientation was mainly in the hoop direction; the Hermans orientation function was in the range of 0.3–0.5 and was essentially the same at all mold temperatures and positions along the bottle height. For the small face, on the other hand, the preferred orientation changed from the hoop direction near the bottom to the axial direction near the top, and the variation was more pronounced at lower mold temperatures. The utility of the front‐surface reflection technique was clearly demonstrated. It was also applied, with the use of an infrared microscope, to examine the orientation gradient across the wall thickness. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1319–1327, 2007     

注射成型塑化过程的可视化实验研究

利用自行开发的可视化实验装置对注射成型的塑化过程进行了系统的观察,着重讨论了不同的工艺条件对塑化性能的影响,同时借助示踪粒子对塑化过程的重要参数——固相速度进行了测量。实验所取得的数据为注射成型熔融模型的建立和对模型的验证提供了依据,同时也是注射螺杆优化设计的基础数据。     

酚醛树脂注塑料的化学流变行为研究

利用Brabender流变仪，考察了酚醛树脂注塑料的化学流变特性，根据双阿累尼乌斯方程建立了酚醛树脂注塑料的化学流变模型。该模型与实验结果具有较好的一致性，利用该模型可以预测酚醛注塑料注塑所需要的工艺窗口，并能动态模拟整个注塑过程中的黏度变化。