Influence of the stress,strain, and temperature on the surface roughness of an AlSl 52100 steel due to an orthogonal cut

In recent years, the finite element method (FEM) has become the main tool for simulating the metal cutting process because research based on trial and error is time consuming and requires high investment. Early studies were done by different investigators. In this research AISI 52100, hardened steel (62 HRC) was selected for an orthogonal machining process as well as metal cutting simulation using the software DEFORM-2D. This software is based on a forging process and has been adapted to an orthogonal machining process. The results of simulated cutting forces were compared with experimental cutting force data to validate the orthogonal cut simulation. Also, the surface roughness was measured, and the influence of the stress, strain, and temperature on the surface roughness was studied.     

Feedrate optimization and tool profile modification for the high-efficiency ball-end milling process

Trend in die/mold machining is to produce highly quailed surface using the high-speed hard machining with the ball-end cutter. The ball-end milling is, however, less efficiency than the flat end milling. It is important to optimize the feedrate that gives the maximum material removal rate constrained by an allowable surface roughness. The state-of-art of the CBN ball-end cutter technology allows increasing the tooth feed for high-speed and high-efficiency machining. However, because the spherical shape of the cutter can result in the scallop-liked cusps on the machined surface, the surface roughness consideration makes a feedrate limitation to the CBN cutter. In this paper, the optimization of the feedrate by considering the generated-scallop effect of the ball-end cutter has been studied. It was found that the tooth feed must be kept within one third of the path pick in order to keep the feed-interval scallop height not over the path-interval scallop height. Therefore, the potential capability of the CBN cutter for the larger tooth feed (i.e. high efficient) machining can not be fully exploited. It was found a notch-cut on the center of the ball-end cutter reduced the feed-interval cusp height, thus allowing an increased feedrate of more than 50% compared with the standard ball-end cutter. If the parameters of the notch-cut profile can be optimized, it is believed that the feedrate can be further increased.     

水性聚氨酯结构与微相分离的研究

合成了一系列水性聚氯酯，并用红外光谱、差示扫描量热仪对乳液胶膜进行表征，考察了软段组成、DMPA含量及。(-NCO)：n(-OH)比值对产物微相分离的影响。实验结果表明：聚醚型产物的微相分离程度高于聚酯型产物。提高DMPA用量，软段Tg移向低温区，说明体系的做相分离程度加大。随着n(-NCO)：n(-OH)比值的增大，软段Tg也移向低温区，软硬段的微相分离程度增大.     

Adhesion Mechanisms of Polyurethanes to Glass Surfaces I. Structure-Property Relationships in Polyurethanes and Their Effects on Adhesion to Glass

Polyurethanes were prepared from toluene diisocyanate (TDI), 1-4-butane diol (BDO) and polycaprolactone-based triols with varying molecular weights. Among each molecular weight triol-based urethane, hard segment content was varied from 20% to 70%. Differential scanning calorimetry, tensile testing, and Iosipescu shear testing were done on all the various urethanes prepared. Thermal characterization data revealed the dependence of phase separation on hard segment content as well as on the triol molecular weight. Tensile data and Iosipescu shear data further confirmed the observations made from the DSC data. The data further indicated that phase separation can greatly improve the modulus of cross-linked segmented urethanes. Adhesion of these urethanes to glass surface was evaluated using soda-lime float glass plate. Urethane samples were cast on the air side of the glass plates and adhesion was measured in shear mode. Adhesion data indicated that in addition to hard segment content, modulus, cross-link density, and molecular weight of the triols, phase separation seems to be a major factor in controlling adhesion. Surfaces of the failed adhesion samples were also analyzed and the failure mode was found to be cohesive, in varying degree, with the different urethane systems.     

软段含离子基团的阴离子型水性聚氨酯胶粘剂的研究(Ⅱ)——硬段结构的影响

以含有不同离子基团的聚酯多元醇为软段,采用丙酮法合成了一系列水性聚氨酯乳液。研究了不同硬段结构和硬段含量和扩链剂对其干膜物理机械性能和吸水率的影响。     

基于虚拟磁盘的携带型操作系统加密方案

针对移动硬盘的加密系统分区无法被正确辨识而导致误格式化的问题,应用文件系统过滤驱动技术,结合硬盘主引导程序及分区表机理,对现有的基于虚拟磁盘的移动硬盘加解密方案进行了改进,在加密分区包含可运行操作系统的情况下,增加了盘符自动隐藏及恢复的功能。以开源加密软件Truecrypt为例,利用安装了视窗操作系统的固态移动硬盘进行测试。结果表明,在不影响加密操作系统正常运行的同时,盘符自动隐藏及恢复功能避免了用户的误格式化操作,从而提高了移动硬盘加密系统分区的安全性和隐蔽性。     

难粘材料聚烯烃粘合剂

研制了一种不需经任何表面处理即可与聚烯烃类难粘材料粘合的双组份粘合剂，它与铝箔、纸张等极性物粘合效果良好。     

基于小波分析的储粮害虫图像去噪研究

以储粮害虫为研究对象,阐述了小波去噪的基本原理和高频系数置零、硬阈值法、软阈值等几种方法,并提出了一种改进的小波阈值去噪方法,比较了这几种方法在粮虫图像去噪上的优缺点。实验结果表明,改进的新阈值方法能更好的去除噪声,收到更好的效果。     

A NEW SIMULATION APPROACH TO THE ENTROPY-RELATED PROPERTIES OF FLUIDS——CHEMICAL POTENTIAL AND HELMHOLTZ FREE ENERGY OF HARD SPHERE FLUIDS

A new approach to the computation of entropy-related properties of fluids has been pre-sented.Application of the new technique to hard sphere fluids shows that it is capable of providingreliable estimates of such properties as the chemical potential and Helmholtz free energy,even athigh density where other existing methods are hardly applicable.The chemical potential of an infinitedilute component in hard sphere systems has been estimated,and compared with that calculated fromthe Carnahan-Starling equation.     

淬硬钢硬态切削表面粗糙度研究

使用Ti—C基金属陶瓷刀具对45淬硬钢进行了切削试验,研究了切削用量对表面粗糙度的影响．试验分析表明,进给量对表面粗糙度影响最为显著,切削速度对表面粗糙度有一定影响,切削深度对表面粗糙度的影响很小．运用回归分析法,建立了硬态切削表面粗糙度预测模型,通过试验验证了预测模型的准确性．