Healing the psyche through music, myth, and ritual.

According to Carl Jung, a person's symptoms occur as a result of the psyche's creative attempt to self-regulate. These symptoms are viewed as the symbol-making function of the psyche. Music therapy as a therapeutic tool is also viewed as having a symbol-making function in that the physical act of making music involves conceptualizing one's symptoms into sounds. The sound serves as a musical symbol of the symptom. The myth of Orpheus is offered as an example of how early man amplified the creative potential contained in music to heal from life's woes. The Orphic archetype illustrates that music serves as a medium for healing and as an expression of Self. That psyche can be healed by music is a reminder of the connection between music therapy and the myth of Orpheus. In using the therapeutic tool of music one can transcend, through the symbol making process inherent in music therapy, the tension of opposites that are created at the crossroads of disease and wellness. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

用PIXE方法研究骨折家兔骨骼微量元素的变化

用质子激发X荧光分析法测定48只家兔在挠骨骨折愈合过程中骨骼中多种微量元素含量的变化。结果表明，Fe和Sr分别呈鼓凸形和下凹形规律性变化，故Fe和Sr含量的变化可作为骨折愈合过程的指示剂。在骨折愈合过程中发现骨骼和血液中元素钙的相对含量保持不变，故无法为西医用补充钙来治疗骨折的疗法提供依据，但我们的研究结果却表明中医补充微量元素治疗骨折的疗法是有道理的。     

Microcrack generation and its healing in the oxide scale formed on Fe-Cr alloys

Fe -base alloys containing 5, 10, and 20 wt. % Cr were oxidized in a stream of O₂ at 750 and 900°C up to 264 hr. A sulfur decoration method was applied to detect the cracks generated in the scale during oxidation. This method revealed frequent crack generation and its healing in the scale. In the case of low-Cr alloys, the cracks are filled up with newly formed Fe-rich oxide but may be regenerated during further oxidation. Cracks are generated in the scale on an Fe-20Cr alloy also, although this alloy is not so severely attacked because of rapid healing.     

Reduced Graphene Oxides Modified Bi2Te3 Nanosheets for Rapid Photo-Thermoelectric Catalytic Therapy of Bacteria-Infected Wounds

Temperature variation-induced thermoelectric catalytic efficiency of thermoelectric material is simultaneously restricted by its electrical conductivity, Seebeck coefficient, and thermal conductivity. Herein, Bi₂Te₃ nanosheets are in situ grown on reduced graphene oxides (rGO) to generate an efficient photo-thermoelectric catalyst (rGO-Bi₂Te₃). This system exhibits phonon scattering effect and extra carrier transport channels induced by the formed heterointerface between rGO and Bi₂Te₃, which improves the power factor value and reduces thermal conductivity, thus enhancing the thermoelectric performance of 2.13 times than single Bi₂Te₃. The photo-thermoelectric catalysis of rGO-Bi₂Te₃ significantly improves the reactive oxygen species yields, resulting from the effective electron–hole separation caused by the unique thermoelectric field and heterointerfaces of rGO-Bi₂Te₃. Correspondingly, the electrospinning membranes containing rGO-Bi₂Te₃ nanosheets exhibit high antibacterial efficiency in vivo (99.35 ± 0.29%), accelerated tissue repair ability, and excellent biosafety. This study provides an insight into heterointerface design in photo-thermoelectric catalysis.     

Origin of Hole-Trapping States in Solution-Processed Copper(I) Thiocyanate and Defect-Healing by I2 Doping

Solution-processed copper(I) thiocyanate (CuSCN) typically exhibits low crystallinity with short-range order; the defects result in a high density of trap states that limit the device's performance. Despite the extensive electronic applications of CuSCN, its defect properties are not understood in detail. Through X-ray absorption spectroscopy, pristine CuSCN prepared from the standard diethyl sulfide-based recipe is found to contain under-coordinated Cu atoms, pointing to the presence of SCN⁻ vacancies. A defect passivation strategy is introduced by adding solid I₂ to the processing solution. At small concentrations, the iodine is found to exist as I⁻ which can substitute for the missing SCN⁻ ligand, effectively healing the defective sites and restoring the coordination around Cu. Computational study results also verify this point. Applying I₂-doped CuSCN as a p-channel in thin-film transistors shows that the hole mobility increases by more than five times at the optimal doping concentration of 0.5 mol.%. Importantly, the on/off current ratio and the subthreshold characteristics also improve as the I₂ doping method leads to the defect-healing effect while avoiding the creation of detrimental impurity states. An analysis of the capacitance-voltage characteristics corroborates that the trap state density is reduced upon I₂ addition.     

Glycyrrhetinic Acid Liposomes Encapsulated Microcapsules from Microfluidic Electrospray for Inflammatory Wound Healing

In diabetic wound healing, M1 macrophage accumulation and elevated inflammation are prevalent issues. Intelligent delivery systems that can sustainably release antioxidizing and anti-inflammatory ingredients are expected for effective wound healing. Herein, a novel glycyrrhetinic acid (GA) liposomes encapsulated microcapsules delivery system that has desired features for inflammatory wound repair is presented. As the bacteria could break down the alginate shells, the GA liposomes could be controllably released from the microcapsules, which promotes M2 macrophage polarization and regulate their responses in the inflammatory wound microenvironment. Based on these, it is demonstrated that the GA liposomes encapsulated microcapsules delivery system exhibits an anti-inflammatory and immunomodulatory effect for diabetic wound healing in a full-thickness defect model in diabetic rats. These results indicate that the immunomodulatory capabilities of the microcapsules can be unitized for efficient wound repair, and such a delivery system is valuable for clinical wound healing applications.     

Experimental investigation on preparation and performance of clear asphalt

Abstract

Coloured micro-surfacing technology has become increasingly popular in pavement construction because of its economic benefit and ability to accept traffic quickly. The main goal of this study was to produce a clear asphalt with superior performance that can be easily emulsified. Two types of resin that are easy to emulsify and one kind of extract oil were used to synthesise the clear asphalt. The clear asphalt was mixed with a styrene butadiene styrene (SBS) modifier at different proportions using a mechanical agitator. The physical properties of the samples were determined via conventional bitumen tests and the optimum formula was obtained by changing the mixture ratio through orthogonal experimentation. The thin-film oven test evaluated the ageing property of the clear asphalt. The surface energy components corresponding to the advancing process and the receding process were determined using the Wilhelmy plate method. The surface free energy (SFE) of the aggregates was measured with a gravimetric sorption analyser. The adhesive bond energies between asphalt samples and aggregates were calculated using their SFE components to evaluate their properties of fracture and healing. Results show that depending on the amount and type of resin added, different synthetic clear asphalts can be obtained. Further, the clear asphalt mixed with SBS is capable of synthesising better properties at high or low temperature. The clear asphalt with aggregates had fracture and healing properties similar to common base asphalt.