Effect of Al in Ti－microalloyed Mn－Ni－Mo welding wire on microstructure and toughness of deposited metal

ＥｆｆｅｃｔｏｆＡｌｉｎＴｉ－ｍｉｃｒｏａｌｌｏｙｅｄＭｎ－Ｎｉ－Ｍｏｗｅｌｄｉｎｇｗｉｒｅｏｎｍｉｃｒｏｓｔｒｕｃｔｕｒｅａｎｄｔｏｕｇｈｎｅｓｓｏｆｄｅｐｏｓｉｔｅｄｍｅｔａｌ￥ＴａｎＣｈａｎｇｙｉｎｇ；ＺｈａｎｇＸｉａｎｈｕｉａｎｄＳｕｎＷｅｉ...     

大型饼类锻件锻造工艺研究综述

综述了饼类锻件锻造工艺的发展。大型饼类锻件是重型装备的核心部件之一,需要在液压机上进行自由锻造,由于其高径比远远小于1,实际生产中,废品率高,生产难度大,最严重的便是层状裂纹问题。为了克服这一问题,人们对饼类锻件进行了解剖检验,提出了压窝成形法、锥形板镦粗法等各种锻造工艺。     

Effect of binder-phase modification and Cr3C2 addition on properties of WC-IOC0 cemented carbide

For production of fine-grained and corrosion-resistant tungsten carbide (WC) based cemented carbides, addition of chromium carbide (Cr₃3C₂) in small amounts is standard practice. No systematic study, however, has been made of the effects of large additions (maximum 6 wt % ) of Cr₃C₂ as a substitute for tungsten carbide. This study focuses on the effect of hard-phase substitution by C₃C₂ in WC-1OCo cemented carbide. An attempt is also made to modify the binder metal cobalt by partial or complete substitution of nickel. Specimens were prepared using the standard liquid-phase sintering process and were tested for sintered porosity, mechanical properties, corrosion resistance, and microstructural parameters. Results confirm the findings of earlier workers regarding grain refinement and improvement of mechanical properties upon the addition of small amounts (<2 wt%) of Cr₃C₂. Modification of the binder phase improves indentation fracture toughness and corrosion resistance. Addition of Cr₃C₂ independent of the binder type improves corrosion resistance.     

堆焊用药芯焊丝生产过程中的质量控制

针对堆焊用药芯焊丝生产过程中的质量控制问题，从设备状态、合金粉末、包粉量、焊丝刚度、减径量、拔丝粉、拉拔力和拉拔速度等方面提出了相应的措施，以保证和提高药芯焊丝质量的稳定性。     

板料弯曲回弹的有限元模拟影响因素研究

阐述了板料成形数值模拟中回弹问题的研究历史和发展现状,分析了塑性弯曲加工中工件发生弯曲回弹的原因、特点及有限元模拟过程的影响因素,总结了回弹模拟的算法,从成形过程模拟和回弹计算两方面系统分析了影响回弹模拟准确性和收敛性的主要因素及改进方向,讨论了模具设计中回弹的补偿算法 ,并提出了当前控制回弹的基本方法     

铝—钢双金属复合轧制层厚比及轧制力的研究

用实验方法研究了铝－钢双金属复合轧制时层厚比的变化规律。给出了双金属复合时轧制力的计算式。     

中厚板轧机工作辊失效分析及对策

介绍了济钢中厚板厂使用国外高镍铬和高铬工作辊的主要失效形式 ,并对该工作辊的断裂和裂纹产生原因进行了分析 ,同时针对所存在的问题提出了对策和具体改进措施。     

BREAKAGE MECHANISM OF TUNGSTEN BASED ALLOY BLOCK FOR ELECTRO-HEAT UPSETTING

The breakage mechanism of W-Ni-Fe alloy in the process of electro-heat upsetting studied both theoretically and experimetnally, and also the behaviors of crack formation and propagation were analysed. Alloy suffers from corrosion and thermal-mechanical fatigue mutual function. Simultaneously, the practical ways to improve the anvil life was discussed.     

Stabilizing Redox-Active Hexaazatriphenylene in a 2D Conductive Metal–Organic Framework for Improved Lithium Storage Performance

Organic redox-active materials are promising electrode candidates for lithium-ion batteries by virtue of their designable structure and cost-effectiveness. However, their poor electrical conductivity and high solubility in organic electrolytes limit the device's performance and practical applications. Herein, the π-conjugated nitrogen-containing heteroaromatic molecule hexaazatriphenylene (HATN) is strategically embedded with redox-active centers in the skeleton of a Cu-based 2D conductive metal–organic framework (2D c-MOF) to optimize the lithium (Li) storage performance of organic electrodes, which delivers improved specific capacity (763 mAh g⁻¹ at 300 mA g⁻¹), long-term cycling stability (≈90% capacity retention after 600 cycles at 300 mA g⁻¹), and excellent rate performance. The correlation of experimental and computational results confirms that this high Li storage performance derives from the maximum number of active sites (CN sites in the HATN unit and CO sites in the CuO₄ unit), favorable electrical conductivity, and efficient mass transfer channels. This strategy of integrating multiple redox-active moieties into the 2D c-MOF opens up a new avenue for the design of high-performance electrode materials.