视频监控技术在水利信息平台中的应用

主要介绍视频监控系统技术发展的历程。视频监控系统从最初的模拟监控系统到数字化监控系统,视频监控系统和通信技术借助网络功能使其应用更加方便。水利系统内视频监控技术的大量应用给防汛决策提供了直观的图像信息,提高了工作效率,推动了监控平台的功能整合信息共享的需求;亟待完善水利系统建设监控平台应有的标准规范。     

高压切割喷嘴冲击磨损的数值分析

以复用矿井含煤颗粒的水对高压切割喷嘴的磨损物理问题为研究对象,采用计算流体力学理论进行数值计算,分析讨论了质量浓度为10、15、20、25、30、40 mg/L条件下速度、剪应力、磨损的分布以及变化关系。计算、分析结果表明:磨损主要发生在出口部位和锥体的后半部份,入口部份和锥体前半部份磨损较小;入口部位、锥体部位磨损量、剪应力随质量浓度增加变化较小;出口部位磨损量在质量浓度为10～20 mg/L减小较快,超过20 mg/L后变化不大;出口部位流体速度、磨损量、剪应力与质量浓度间存在对应关系。煤粒入口速度与混合物速度相同、锥体部位煤粒流体速度低于锥体部位混合物速度(平均值)约79.4%;煤粒出口部位速度随质量浓度的增大而呈现先增加后减小的趋势,速度最大值发生在浓度20 mg/L。     

坦克设计新发展

本文提出“针对式坦克发展战略”主要内容,它要求“突破性新概念高新技术”,获得“减法设计方法”,因而形成“坦克发展新道路”.运用“系统总体取胜”的系统工程理论,处理好坦克全系统“综合”、全系统与分系统“配置”、分系统与分系统“匹配”、全系统与人及作战环境“适应”四大关系,以“相互同水平组合”替代“单项高水平爬坡”.通过“从系统总体着眼、由边际零部件突破”的途径,善于从各个部分或部件之间的结合部加以突破,实现坦克设计新发展.     

增材制造技术在电机中的应用综述

增材制造技术(即3D打印)因具有高设计自由度、高材料利用率、高成形效率和精度等优势,逐渐成为高效轻质高功率密度电机设计与制造的研究热点。该文旨在对3D打印电机的性能及其应用作系统性综述。首先,对3D打印电机的发展脉络进行简要概括。其次,分别对3D打印铁心、磁钢、绕组,以及散热和机械支撑结构的研究现状进行总结,并与传统工艺加工的样件进行性能对比。随后,介绍了适用于增材制造的结构设计方法——拓扑优化。最后,根据目前的研究情况归纳了3D打印电机未来的发展趋势和面临的挑战。     

Entrepreneurial acquisitions,open innovation and UK high growth SMEs

This paper examines the dynamics of entrepreneurial acquisitions undertaken by UK high growth small and medium enterprises (SMEs). While entrepreneurial acquisitions are increasingly deployed by SMEs, little is known about their antecedents, motivational drivers and organisational outcomes. Drawing on detailed case study evidence from Scotland, the key factor found to be driving these acquisitions was the desire to augment and exploit technological complementarities between the acquiring and acquired firms. Acquisition can therefore be conceptualised as an advanced stage of the outside-in ‘open innovation’ strategies proactively used within these innovative SMEs. Firms executing this strategy typically have an acute propensity for risk, a desire for close customer engagement, effective business models and strong external orientation. The work suggests that greater attention should be paid within M&A theory to the dynamics of these types of smaller scale entrepreneurial acquisitions.     

35 T强磁场下Cernox和氧化钌温度传感器的磁致电阻效应研究

以Cernox(CX-1050、CX-1030)和氧化钌(RX-202、RX-102)温度传感器为研究对象,研究了其在0—35 T场强、0.75—69.5 K温区下的磁致电阻效应。实验结果表明:CX-1050和RX-202的磁效应和在35 T下的测量误差都随温度的变化出现正负磁效应和正负温度误差交替的现象,且低于10 K时,磁效应随温度的变化率明显增大,在35 T、4.2 K处CX-1050和RX-202的磁效应分别为-6.63%、2.21%;总体来说强磁场下受磁阻影响由小到大分别为RX-202、CX-1050、CX-1030、RX-102,尤其RX-202,在1—35 T、4.2 K以下产生的测量误差小于-0.1 K。Cernox和氧化钌温度传感器受磁场的影响都较小。     

N-polar GaN基HEMT准二维电荷传输模型仿真

建立了氮极性(N-polar)GaN基HEMT器件的准二维(Quasi-2-D)电荷传输模型,仿真研究了N-polar GaN基HEMT的直流特性。仿真结果表明,不同的极化效应会对输出特性曲线和转移特性曲线产生不同的影响,考虑自发极化效应(Psp)+压电极化效应(Ppe)、只考虑Ppe和只考虑Psp三种情况下的阈值电压分别为:-3.96V、-2.29V和-2.47V,而其对应的峰值跨导则分别为44mS/mm、41.2mS/mm和41.3mS/mm。该模型为N-polar GaN基HEMT器件仿真提供了理论参考。     

高效能空气净化器评价技术要求国家标准研究

本文论述了编制高效能空气净化器产品评价技术要求国家标准的意义和作用,介绍了标准研制的总体思路和原则,高效能空气净化器的定性和定量评价指标要求,测试、计算和评价方法等,通过国标的研制与实施,将引领并促进高效能空气净化器产品的生产与应用.     

A linear algorithm for conformal 3D-to-flatness coordinates conversion

Data conversion from a 3D raster to spiral coordinates is the key function in the scanning process for Roll Powder Sintering (RPS) additive manufacturing technology. Conversion process is especially important, as it produces the basis for a processed object. There are many equations for such conformal transformation, but there is still room to improve the computation efficiency. This paper presents an efficient conversion algorithm, which processes 3D objects and linear transforming it into rolling ribbon. The new algorithm has several significant advantages over the old ones due to applying only one main linear equation. The program based on the linear algorithm is simpler, more compact and faster in comparison to other programs which use trigonometric, transcendental or other equations. The proposed algorithm has been developed and extensively tested on several parts of computer-aided design models for RPS processing.