医用高分子材料的现状与应用

概述了医用高分子材料的发展现状及其用途,并介绍了医用高分子材料的发展动向。     

Molecular weight distributions and size fractionations of H-coal liquids

This Paper deals with a comparative study on the use of gel permeation chromatography (g.p.c.) and vapour pressure osmometry (v.p.o.) to obtain molecular weight data for the hexane-soluble fractions of three H-coal liquids. The use of two types of column packing materials, polyvinylacetate and styrene-divinylbenzene copolymer gels, is described. A successful, preparative use of the polyvinylacetate gel to fractionate the hexane-soluble fraction of H-coal liquid, atmospheric still overhead (ASO), has been established. Molecular weight data obtained by v.p.o. for the benzene-soluble fraction and the pyridine-soluble fraction of the three H-coal liquids are reported. Solvent extraction has been utilized also to find the amount of oil, asphaltenes and asphaltols in the three H-coal liquids.     

Optical properties of high-temperature heat-treated vitrinites

Three vitrinites (C = 80.0, 87.9 wt%, daf and 94.2 wt%, dmmf) have been heat-treated over the temperature range 1000–2400 °C in the presence of argon. The variation of morphological and optical properties of the heat-treated samples is studied systematically using reflected-light microscopy. An optically isotropic, highly reflecting material is formed on the surface of anisotropic particles of two of the vitrinites (C, 80 and 94.2 wt%) during semi-graphitization (1000–1400 °C), which decreases in extent with increasing temperature and is absent at the end of this stage. The development and subsequent disappearance of the isotropic material is probably due to the evolution of volatile matter and subsequent deposition of pyrolytic carbon during semi-graphitization. The continuous increase of bireflectance of these two vitrinite residues, with heat-treatment temperature, indicates progressive improvement in the ordering of the molecular structure. The reflectance of the heat-treated anthracitic vitrinite (C, 94.2 wt%), increases continuously whereas the reflectance of the heat-treated low-rank vitrinite (C, 80 wt% decreases slightly from a maximum during semi-graphitization. The third vitrinite (C, 87.9 wt%) does not develop an optically isotropic highly reflecting material on particle surfaces during semi-graphitization. However, this vitrinite softens during carbonization (25–1000 °C) producing a residue with a mosaictype anisotropic microstructure. The condition of polished surfaces prepared from residues of this vitrinite from the semi-graphitization to crystallization stages (1000–2300 °C) deteriorates, values of bireflectance and reflectance decrease continuously with increasing temperature. This appears to result from a reduction in the surface hardness of particles of this vitrinite residue resulting on transformation from two-dimensional ordering to three-dimensional graphitic ordering.     

壳聚糖/羧甲基壳聚糖止血膜的制备与表征

针对壳聚糖止血膜柔韧性差的问题,以丙三醇和酚磺乙胺作为改性剂,采用溶液浇膜的方法制备了不同组成配比的壳聚糖(CS)/羧甲基壳聚糖(CMCS)止血膜,并评价了CS/CMCS止血膜拉伸性能和止血效果.丙三醇的引入可使CS/CMCS止血膜的断裂伸长率提高4~7倍,尽管其拉伸强度也降低了70%.丙三醇改性的CS/CMCS=8/2载药止血膜具有较好的拉伸强度(10.4±0.9 MPa)和断裂伸长率(50.4±4.5%);与未加入酚磺乙胺的CS/CMCS止血膜相比,酚磺乙胺的离子交联作用使CS/CMCS载药止血膜的拉伸强度提高55%,而断裂伸长率仅降低24%.止血评价结果表明经丙三醇改性的CS/CMCS=8/2止血膜均能使血液发生分离的时间明显缩短,并具有促使血液凝结形成黑色血块的能力.     

米曲霉在牛乳中最适生长条件的研究

利用米曲霉对牛乳进行发酵,通过单因子及正交试验以菌丝体干重为指标对其在牛乳中的生长进行了研究．结果表明：接种量为4％,装液量为30mL,摇床转速为180r／min时菌丝体干重可达到最大．此外测得最大菌丝体干重时的蛋白质分解率可达35．6％．     

高压旋喷桩复合地基承载特性的有限元分析

结合工程实际,运用大型有限元分析软件ANSYS分析了不同桩长、不同桩土模量比和不同桩间距情况下高压旋喷桩复合地基的承载特性.结果表明,该地基存在有效桩长,当桩土模量较合适时,该地基能够发挥最大作用;同时运用ANSYS优化功能,得出了最优桩长、最优桩体弹性模量和最优桩间距,为实际工程提供一些参考.     

筏板基础在自贡地区高层建筑设计中的应用研究

文章结合工程设计经验对自贡地区的高层建筑在选用天然筏板基础的设计过程中,对高层建筑基础设计中涉及到的重要的地基沉降计算、结构设计和地下水等有关问题的处理进行了具体分析,对在一般高层建筑中采用天然筏板基础的实用性和可行性从设计和施工两个方面进行了相关的工程探讨。     

Progress and recent trend in MILD combustion

Moderate or intense low oxygen dilution(MILD)combustion plays a significant role in the mitigation of combustion-generated pollutants and greenhouse gases whilst meeting thermal efficiency needs.However,due to the lack of the fundamental knowledge on this combustion,there is a misconception that MILD combustion should be established by high preheating of the air,which has limited its application.Our research and development on this combustion has been performed for several years. We have found that the requ...     

基于递阶质量屋的多属性灰色模糊评价系统研究

质量功能配置中的顾客需求权重以及设计要求权重的获取是产品配置的关键环节.在层次分析法的基础上,应用递阶质量屋方法优化了各因素的权重值,针对出现的模糊语言,利用模糊数对定性指标进行量化,并将灰色系统理论引入设计方案的多属性模糊优选,提出了一种基于递阶质量屋的灰色关联与模糊优选评价方法.该方法综合考虑相关模糊因素交叉耦合后的影响,对方案优劣进行整体比较.实例证明,该方法能够处理复杂的、多层次的、且信息不够完全的问题,评价方法客观准确,可操作性强,能够得到符合客观实际的结果.