掺杂WRe3、WRe25合金的高温电阻－温度特性

本文报导了采用一种新型高温陶瓷发热体高温管状炉，通以氩气保护，测量ＷＲｅ合金丝的电阻－温度（１６００℃）特性试验方法，该方法较真空炉简便、实用且试验费用低而准确，测量数据与美国研究报导一致。     

高压氮气中自蔓延燃烧合成氮化钛

利用钛粉在高压氮气中的自蔓延燃烧合成（ＳＨＳ），制备了含氮量较高的ＴｉＮ，研究了反应物的松装密度、氮气压的改变与稀释剂的加入对燃烧波蔓延速率和产物转化率的影响，还观察到燃烧方式的改变。     

Carbon fibre composites based on polyimide/silica ceramers: aspects of structure-properties relationship

Polyimide/silica ceramers, based on the products of the hydrolysis of tetraethoxysilane (TEOS) and a commercial poly(amic acid) solution, were used to fabricate unidirectional carbon fibre composites, which were subsequently evaluated with respect to thermal and mechanical properties. There is evidence to suggest that the silica component of these ceramers is present as dispersed discrete particles at low silica concentration (i.e. 7 wt%) and as fine interconnected domains trapped within the polyimide matrix at higher silica content (i.e. 14 wt%). The dimensions of the silica domains were in the region of 7–20 nm. Carbon fibre composites produced from ceramer solutions (CF/ceramers) were found to exhibit lower thermal expansion and a greater retention of flexural and interlaminar shear properties at elevated temperature than the corresponding polyimide-matrix composites (CF/polyimide). The properties of CF/ceramers were generally better for systems containing the higher amount of silica and were improved further by lowering the pH value of the precursor ceramer solution. This is believed to have resulted from the enhanced fluidity of the ceramer gel within the pre-impregnated fibres, giving rise to a higher packing density of the fibres and a more homogeneous distribution of fibres. CF/ceramers were also found to exhibit a better thermal oxidative stability at 350°C than the corresponding CF/polyimide, although a substantial amount of porosity developed in the case of ceramers with the higher silica content.     

CREEP BEHAVIORS OF Pt-RE ALLOYS AT HIGH TEMPERATURES

The creep behaviors of Pt-RE alloys have been studied at 1200℃ and 1400℃.The results show that asmall amount of RE elements improves the creep behaviors of platinum greatly.The creep behaviors of PtGd0.5,PtLa0.5 and PtLa0.3 Gd0.2,are best among all the alloys studied.As far as the creep behaviors are concerned,the traditional heat-resistance alloy PtGd10 can be replaced by PtGd0.5.Particularly,the properities of PtGd0.5are near to those of PtRb10.For most of the Pt-RE alloys,long-time,static,super high-temperature treatment inair is of no advantage to the creep rupture life.The mechanisms of the effects of rare-earths on high-temperaturecreep properties of platinum are discussed.     

Effect of high temperature on the mechanical properties of hierarchical porous cenosphere/geopolymer composite foams

A hierarchical porous cenosphere/geopolymer composite foam (FHCs/KGP) was fabricated by the simultaneous incorporation of O₂ pore from hydrogen peroxide and cenosphere filler addition. Effects of both H₂O₂ content and high-temperature treatment on the microstructure, porosity and strength of porous FHCs/KGP foams were investigated systematically. The obtained FHCs/KGP foams showed typical amorphous structure and desirable porosity from 65 to 82%. The composites could crystallize in situ to FHCs/leucite foams above 1000℃. Compression strength of the FHCs/leucite foams showed a maximum value of 5 ± 0.3 MPa when treated at 1000°C. The improvement of mechanical properties for the composite foams was attributed to crack deflection, fractured microspheres and the good bond between the FHCs and matrix. This study could open opportunities to employ cellular foams as alternatives in structure and filtration applications.     

等速升温流态化下CaO/生物质焦的SO2/NO联合脱除特性

燃煤锅炉污染物超低排放标准对电厂脱硫和脱硝系统提出了更高的要求。CaO作为脱硫剂可以实现循环流化床锅炉烟气中SO₂的高效脱除,焦炭作为还原剂直接还原NO,同时CaO的存在对焦炭还原NO起催化作用,可以实现燃煤烟气中SO₂/NO的联合脱除。为了探究连续温度变化对CaO/生物质焦联合脱硫脱硝性能的影响,在钙循环捕集CO₂技术背景下,研究了等速升温流态化下CaO/生物质焦的SO₂/NO联合脱除特性。探究了烟气中O₂和CO₂对CaO/椰壳焦脱除SO₂/NO的影响。结果表明,O₂通过对椰壳焦表面碳原子的活化作用降低了异相还原NO温度,在300~950℃等速升温过程中CaO/椰壳焦的NO脱除效率逐渐增加,780℃以上能实现100%脱硝。O₂也提高了CaO/椰壳焦的脱硫效率。CO₂与CaO的碳酸化反应以及与椰壳焦的气化反应对同时脱除SO₂/NO有明显抑制作用。O₂和CO₂共同作用下,在500~800℃内CaO/椰壳焦的脱硝效率随温度升高而增加,脱硫效率先降低后升高。NO促进了CaO/椰壳焦脱除SO₂,而SO₂对脱硝有抑制作用。800℃时CaO/椰壳焦同时脱除SO₂和NO的效率分别为97.7%和93.9%。     

ZrB2陶瓷的制备和烧结

采用自蔓延高温合成(Self-propagating high-temperature synthesis,SHS)技术和热压烧结(Hot pressing,HP)方法分别研究了Zr-B2O3-Mg和ZrO2-B4C-C体系反应原料的粒度和配比以及烧结温度对产物的影响规律,并烧结得到ZrB2陶瓷.采用X射线衍射和化学分析方法分析了材料的相组成,利用SEM和TEM观察了显微结构;并用阿基米德排水法测定了相对密度.结果表明:在Zr-B2O3-Mg体系中,50μm Zr粉和Mg过量15%(摩尔分数)的体系是最理想的SHS反应体系;SHS产物粒径、酸洗产物粒径和烧结体粒径分别为2～5μm、0.5～2.0 μm和2～10μm;酸洗产物组成为94.59%ZrB2、3.87%ZrO2和1.54%H3BO3(质量分数);烧结体为单相ZrB2陶瓷,相对密度为95.4%.在ZrO2-B4C-C体系中,B4C过量15%和C过量10%(摩尔分数)的体系是最理想的反应体系;烧结体相对密度为94%;烧结体组成为95.44%ZrB2、3.87%ZrO2、0.32?C和0.37%C(质量分数).     

脱除重油中有害金属杂质新技术

用化学药剂在一定条件下进行反应后用水萃取，并用 电脱水的方法脱除金属.研究了注药剂量、反应温度和反应时间等因素对脱除率的影响.     

Observations on the role of oxide scales in high-temperature erosion-corrosion of alloys

The results are presented of exposure to a controlled high-temperature erosive gas stream of a series of alloys, which were selected to represent the range of microstructures and mechanical properties available in commercial high-temperature alloys. Analysis of the kinetic and morphological data suggested that the high-temperature oxidation behavior of a given alloy plays a very important role in determining its erosion-corrosion behavior under the conditions studied. In terms of relative behavior, alloys which are weak but ductile at temperature, and which form tenacious oxide scales, exhibited the highest resistance to high-temperature erosion-corrosion. Simple models were developed to describe the expected interaction between high-temperature oxidation and erosion.     

Cr3Si／Crl3Ni5Si2金属间化合物合金组织与高温滑动磨损性能的研究

利用水冷铜模激光熔炼炉制得了由初生枝晶Cr3Si和枝晶间Cr3Si／Crl3Ni5Si2共晶组成的金属间化合物合金。利用OM，SEM，TEM，EDS和XRD分析了该金属间化合物的显微组织，在400℃，500℃和600℃条件下测试了其耐磨性能。结果表明，由于Cr3Si和Crl3NisSi2硬度高、原子键合力强、组织细小、均匀，在高温滑动磨损条件下具有优良的耐磨性能。