Possible use of methylbenzenes as electrolyte additives for improving the overcharge tolerances of Li-ion batteries

Based on the voltammetric behaviour of a series of methyl-substituted benzenes in 1M LiPF₆/EC-DMC electrolyte, xylene was selected and tested as an electrolyte additive for overcharge protection of Li-ion batteries. From the overcharge curves, CV behaviour and SEM observations of the cells in the presence of xylene, it was found that the additive can polymerize at the overcharged voltage to form a dense layer of isolating polymer film at the cathode surface, which blocks off further oxidation of the electroactive material and electrolyte and, therefore, improves the overcharge tolerance of the Li-ion battery. In addition, the xylene additive has shown only a slight influence on the cycling behaviour.     

添加物对ZrO2系快离子导体烧结性能的影响

本文介绍了１３２０℃下，ＣａＯ，Ｙ２Ｏ３等稳定剂，低融物组成及１－６价阳离子化合物对ＺｒＯ２烧结性能的影响并列举出材料的晶型及某些主要性能。     

RECURSIVE GENERALIZED M ESTIMATES FOR AUTOREGRESSIVE MOVING-AVERAGE MODELS

Abstract. Outliers in time series seriously affect conventional parameter estimates. In this paper a robust recursive estimation procedure for the parameters of auto-regressve moving-average models with additive outliers is proposed. Using 'cleaned' residuals from an initial robust fit of an autoregression of high order as input, bounded influence regression is applied recursively. The proposal follows certain ideas of Hannan and Rissanen, who suggested a three-stage procedure for order and parameter estimation in a conventional setting.
A Monte Carlo study is performed to investigate the robustness properties of the proposed class of estimates and to compare them with various other suggestions, including least squares, M estimates, residual autocovariance and truncated residual autocovariance estimates. The results show that the recursive generalized M estimates compare favourably with them. Finally, possible modifications to master even vigourous situations are suggested.     

全球氨基酸市场供需与预测

概述了近年来饲料添加剂用氨基酸类的现状和今后发展。着重介绍了氨基酸中主要产品蛋氨酸、赖氨酸和苏氨酸在美国、欧盟和日本的生产和市场发展动向。由于这类食品添加剂需求强劲，目前，该市场正处在回升之中。     

复合材料RTM模具的制备

根据树脂传递模塑(RTM)模具对基体树脂的基本要求,选用双酚A环氧乙烯基酯树脂为基体,聚乙酸乙烯酯为低收缩添加剂,玻璃纤维经编织物为增强材料,并加入相应的助剂,制备了复合材料RTM模具。该模具具有成本较低、开发周期短、精度较高等优点,但表面强度和热效率较低。     

Interaction of Aluminum with Detonation Products

A method of electrical conductivity and an analysis of recovered explosion products are used to study interaction of aluminum with detonation products of condensed high explosives. The electrical conductivity of HMX/Al and RDX/Al mixtures is inhomogeneous; a region with the maximum electrical conductivity is adjacent to the detonation front, whereas the electrical conductivity decreases with distance from the front. If the wave is incident onto a wall, the electrical resistance of the composite high explosive increases, which indicates that the high-conducting zone disappears. The electrical conductivity, resistance of the conducting zone, and the time of resistance growth are found as functions of the particle size of the additive. The results obtained confirm the reaction of the metal additive with detonation products in a microsecond range of time. An analysis of condensed explosion products shows that the reaction of aluminum with detonation products proceeds on the particle surface. The amount of reacted aluminum and the oxide-layer thickness are estimated. __________ Translated from Fizika Goreniya i Vzryva, Vol. 42, No. 1, pp. 120–129, Jnuary–February, 2006.     

由氯化钙制备纳米碳酸钙研究

随着国民经济的发展,对纳米碳酸钙的需求量越来越大.基于化工生产中大量副产氯化钙,以氯化钙和碳酸铵为原料,对制备纳米碳酸钙进行了研究.实验研究了添加剂、反应温度和反应物浓度等工艺条件对产物粒径的影响,并采用XRD和TEM对产物进行了初步分析.实验结果表明:不同的添加剂对产物粒径以及形貌具有一定的影响,当氯化钙和碳酸铵配料比为1.0:1.0 mol/mol、反应温度为15℃和氯化钙浓度为0.3 mol/L时,以有机醇A和磷酸系化合物G为添加剂制备的产物为方解石型球状碳酸钙,粒径在50 nm左右.     

EFFECT OF NONSOLVENT ADDITIVES ON THE PORE SIZE AND THE PORE SIZE DISTRIBUTION OF AROMATIC POLYAMIDE RO MEMBRANES

In this paper discussions are made on the effect of nonsolvent swelling agents on the average pore size and pore size distributions at the surface of polyamide membranes which result from casting solutions involving above nonsolvent swelling agents.

The size of the polymer aggregate in the film casting solution and the size of polymer network pores are correlated to physicochemical data of ions which constitute the electrolytes used as nonsolvent swelling agents. As such ionic properties the charge density and the free energy of transition of ions from polyamide phase to water phase were considered. The validity of the correlation is limited in a range of casting solution composition where the polymer concentration in the casting solution is close to the limiting concentration of polymer at the phase boundary and the molar ratio of the nonsolvent swelling agent to the amide group involved in the polyamide polymer is equal to or slightly more than 0.7.     

有机化合物及聚合物的计算机辅助红外光谱法鉴定

建立了计算机辅助红外光谱法鉴定有机化合物及聚合物的新方法,介绍了计算有机化合物和聚合物的一些经验公式。程序设计首先收集、整理常用聚合物、有机添加剂和有机小分子的红外光谱数据,然后提取反映该物质特征的吸收峰数据,制作ACCESS数据库,利用VisualBasicDAO数据链接方式,根据查询要求动态链接数据库,利用要求查询的聚合物特性,经过经验公式的算法翻译,生成SQL查询语句进行查询。     

制浆造纸工业用消泡剂的开发及应用进展

制浆造纸工业生产过程中不可避免会产生泡沫,泡沫控制不当会严重影响制浆造纸工艺条件的执行以及设备的正常运转,导致产品产量和质量降低,而控制泡沫最直接有效的措施是添加合适的消泡剂.该文介绍了制浆造纸工业生产中泡沫的产生和稳定机理,泡沫对制浆造纸工业生产过程和产品质量的影响,并针对制浆造纸生产中制浆、抄纸、涂布和脱墨等工段泡沫特性和消泡要求,综述了制浆造纸用消泡剂的发展历程、各工段消泡剂种类和性质,介绍了消泡剂的研制开发和实际应用成本及使用效果等,并对制浆造纸用消泡剂的发展进行了展望.