FORMATION OF MANGANESE SILICIDE THIN FILMS BY SOLID PHASE REACTION

1. IntroductionThe transition metal silicides have attraeted much attention because of their potentialapplicatiOIl in very large scale integration (VLSI) de.ice[1]. Near-noble metal silicides canbe used as Schottky al1d ohn1ic col1tacts in silicon-based d…     

试论我国解放后炼铁技术路线

本文简要回顾建国以来我国炼铁技术路线的演变过程，并展望２１世纪的前景。     

Corrosion of metals and alloys in mixed gas environments at elevated temperatures

The attack of nickel, cobalt, iron, and alloys of these metals containing chromium and aluminum, by gases containing sulfur-oxygen, carbon-oxygen, and nitrogen-oxygen has been studied at temperatures of 600 and 900°C. The degradation of these metals and alloys was characterized by using standard analytical techniques with emphasis on optical metallography. Three types of accelerated degradation were identified for the attack of alloys by gases containing another oxidant in addition to oxygen. One type of degradation occurred because of the formation of reaction products composed of mixtures of phases involving both of the oxidants. Another type resulted from the reaction of second oxidant phases with oxygen. The third form of degradation involved the development of less protective phases due to thermodynamic instabilities. Thermodynamic stability diagrams are used to help account for the effects produced by different elements in the alloys.     

Investigations of surface degradation of high‐density polyethylene materials resulting from tracking,using physicochemical analysis

In the present work tracking phenomena were studied with high‐density polyethylene (HDPE) materials under dc voltage, with NH₄Cl and acid rain as contaminants. It was determined that the tracking time of the material depends on the conductivity and flow rate of the contaminant. Furthermore, physicochemical analysis by wide‐angle X‐ray diffraction studies, differential scanning calorimetry, and luminescence spectroscopy was carried out, whereupon it was concluded that the tracking process is a surface‐degradation process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2843–2849, 2002; DOI 10.1002/app.10260     

NIT-Ph-p-BEN氮氧自由基的制备及催化降解性

以对醛基苯甲酸为原料，通过醛酸与2,3-二甲基-2,3-二羟胺基丁烷缩合，再经NaIO4氧化最终制得4-(4,4,5,5-四甲基-1,3-二氧化物)咪唑基-1-苯甲酸（NIT-Ph-p-BEN氮氧自由基）。采用FTIR、UV、ERP（电子顺磁共振波谱仪）和元素分析等对其结构进行表征；通过催化降解废水中有机染料甲基橙、甲基蓝和罗丹明B对其催化活性进行了评估。结果表明，当甲基橙、甲基蓝和罗丹明B浓度为15 mg/L，NIT-Ph-p-BEN质量浓度为0.15 g/L，H2O2浓度为30 mmol/L时，NIT-Ph-p-BEN对甲基橙有更好的催化降解性，仅在1 h内甲基橙的降解率达到94.26%。此外，反应机理表明，H2O2有助于实现NIT-Ph-p-BEN自由基的再生和循环利用。     

On the preparation and properties of CuZSM-5 catalysts for NO decomposition

Equilibrium exchange isotherms were determined for the exchange of Cu²⁺ with NaZSM-5 at varying Cu(Ac)₂ concentrations in solutions of constant volume and zeolite weight. At low Cu²⁺ levels the solid scavenged all the copper ions. When copper could be detected in the equilibrated solutions, overexchange was observed. The extent of overexchange was higher at pH 6 than at pH 4. These results were analyzed in relation to catalytic activity.On leave from the Central Institute for Chemistry, Hungarian Academy of Sciences, H1525 Budapest, Hungary.     

碳沉积法制富氮用炭分子筛的研究

本文提出的碳沉积法是用煤焦油馏分油的有机溶液浸渍煤炭化物,然后热解以进行“孔调变”。确定了最佳工艺条件,制得富氮性能良好的炭分子筛。并用D-A方程求取了各种样品的微孔结构参数。     

耐盐性树脂PAA的合成及应用研究

以丙烯酸-丙烯酰胺为单体，过硫酸钾为引发剂，N，N-亚甲基双丙烯酰胺为交联剂。水浴阶梯升温共聚合成耐盐性树脂，采用正交试验通过分析，研究了主要因素对产物性能的影响，确定较佳反应条件：T=50℃(2h)～65℃(3h)，单体配比nAM：nAA=1：11，单体中和度[N]=90％～95％。引发剂浓度[I]=0．3％，单体浓度[M]=30％～35％，交联剂浓度[C]=0．025％～0．03％，并将此树脂作为缓释剂应用于固载二氧化氯中，取得了良好的效果。     

基于Tau域奇异值分解的航空电磁数据解卷积计算

目前很多国际先进公司的AEM系统都具有不同的发射波形,给后续数据处理带来不便。为去除不同发射电流波形对电磁数据响应的影响,利用SVD分解法,以e指数为基函数,将时域航空电磁响应数据展开成Tau域参数T_i及其系数A_i形式,通过选取有效个数的Tau值,将基函数与发射电流进行卷积,形成新基底函数。通过对相应发射电流的响应以新基底展开,将新基底系数B_i与原基底结合,实现解卷积计算,得到阶跃波形发射电流情况下的电磁响应。仿真实例计算结果表明,经奇异值分解的Tau域分解方法保证了计算的精度和稳定性,基于奇异值分解的解卷积计算方法能够获得原阶跃电流响应,相对误差为1.61%。