超Jaynes-Cummings模型中的原子置于热辐射场时的相干特性

超Jaynes一Cummings模型中的两能级原子置于热辐射场。通过求解原子与热辐射场相互作用过程中原子约化密度算符非对角元．精确得出子原子相干性的衰变规律。研究了在相互作用系统中外加驱动场时可保持原子的相干性，此时外加驱动场的时间演化与原子的跃迁频率、原子偶极矩、热库的温度和k模光子频率等因素有关。     

新型热红外伪装涂料用填料中空微珠性能研究

分析了温度对涂层发射率的影响，并据此重点研究了一种新型热红外伪装涂料用填料——中空微珠——的常规使用性能、降温效果以及对涂层发射率的影响。研究认为，中空微殊用量小于20％、粒径为200目左右时常规使用性能最好。60目的中空微殊降温效果最好，而且当其用量小于20％时，中空微珠对涂层的发射率基本没有影响。     

Influence of a Jump in the Power of Laser Radiation on Its Measurement

Simulation and investigation of the effect of an isolated jump on realization of the unit of power of laser radiation and dissemination of the size of the unit are considered. Results are obtained by means of a newly developed algorithm that characterizes the behavior of the mean value of a signal and the standard deviation of a system as functions of the parameters of a jump in the power of laser radiation and the length and amplitude of the jump. If information concerning the time when a jump occurs is available, the proposed algorithm makes it possible to take into account how a jump affects the ultimate result of a measurement.     

主动式红外光电靶的研究

提出了采用红外光源的主动式光电靶的设计构想，用以消除传统天幕靶在对低速弹测量时，声音对测量的干扰，并设计了整个实验方案，在对静态实验结果进行分析的基础上，证明了该种方法的可行性。     

同步辐射光刻技术

同步辐射光刻有希望代替传统光刻技术,用于0.25μm以下图形的超精细加工。本文叙述了它的原理、相关技术的开发现状和工艺应用。     

锆钡镧铝氟化物玻璃的分相研究

本文综述了氟化物玻璃中的分相研究。在前人研究基础上应用透射电镜，X射线能谱，电子能量损失谱及X射线衍射，差热分析等研究了锆钡镧铝氟化物玻璃中的液-液分相，发现此种现象普遍存在于该类玻璃之中。对玻璃成分与分相形貌及微观结构之间的关系、对析出晶相种类及分相与析晶的相互影响进行了研究。提出欲降低氟化物玻璃的光损耗，分相与析晶一样是不容忽视的因素。     

Improved cellulase production by stable Clostridium cellulolyticum mutants

Methods for the production of mutants of the cellulase producer Clostridium cellulolyticum ATCC 35319 were examined using an agar plate screening technique. Spontaneous and UV light-induced mutants were isolated, some of which exhibited a high level of both endoglucanase and exoglucanase activities as assayed using CMC (carboxymethyl cellulose) and PNPCb (paranitrophenyi-β-cellobioside) respectively. The volumetric enzyme activities were up to 2.5 times those of the wild strain.     

红外警戒系统作战环境的计算机仿真

文中论述了红外警戒系统视景仿真研究的主要内容，给出了仿真软件流程。探讨了满足红外警戒系统全方位、多目标视景生成的实时性方法。     

Near‐Infrared Light‐Emitting Diodes (LEDs) Based on Poly(phenylene)/Yb‐tris(β‐Diketonate) Complexes

Near‐infrared‐emitting electroluminescent (EL) devices using blue‐light‐emitting polymers blended with the Yb complexes Yb(DBM)₃phen (DBM = dibenzoylmethane), Yb(DNM)₃phen (DNM = dinaphthoylmethane), and Yb(TPP)L(OEt) (L(OEt) = [(C₅H₅)Co{P(O)Et₂}₃]^–) have been studied. EL devices composed of Yb(DNM)₃phen blended with PPP‐OR11 showed enhanced near‐IR output at 977 nm when compared to those fabricated with Yb(DBM)₃phen/PPP‐OR11 blends. The maximum near‐IR external efficiencies of the devices with Yb(DBM)₃phen and Yb(DNM)₃phen are, respectively, 7 × 10^–5 (at 6 V and at 0.81 mA mm^–2) and 4 × 10^–4 (at 7 V, and 0.74 mA mm^–2). The optimal blend composition for EL device performance consisted of PPP‐OR11 blended with 10–20 mol‐% Yb(DNM)₃phen. A device fabricated using Yb‐(TPP)L(OEt)/PPP‐OR11 showed significantly enhanced near‐IR output efficiency, and future efforts will focus on devices fabricated using porphyrin‐based materials.