氮化硅结合碳化硅管状制品的研制

简介了氮化硅结合碳化硅管状制品研制的必要性 ,确定了原材料及粒度配比 ,选择了合适的成型方法及添加剂 ,介绍了氮化烧成机理。研制出的制品其质量和使用性能接近同类进口产品 ,具有良好的市场前景和广泛的推广应用价值。     

Increasing urea-N efficiency for transplanted lowland rice by pneumatic injection: Yield and economics at the farm level

To increase the fertilizer-N efficiency in lowland rice (Oryza sativa L.) cultivation, new management practices are needed. Main cause of the present low efficiency is the low N recovery by plants, as a considerable part of the N applied is lost; deep placement techniques improve the recovery. A pneumatic injector, with which urea prills can be point-placed at a depth of 5–10 cm in paddy soils, was tested in 38 on-farm trials in 1989/90, mostly during the wet season. The experiments, located in Africa and Asia, focussed on differences in grain yield between conventional methods of broadcasting urea and injection by the pneumatic injector, at recommended N-rates. The study shows that the pneumatic injector is effective as a tool to improve the N fertilizer efficiency. The average yield increases per region, resulting from the use of the injector, ranged from about 250 to 1300 kg grain ha^–1. The value of the yield increase would allow most farmers to recover the costs of the injector within one season, even if labour was hired to carry out the injections. The average labour requirement of the injector was 40 hours ha^–1. In Indonesia, injection of prilled urea gave yields similar to those obtained with urea briquettes.     

Binder effect on cycling performance of silicon/carbon composite anodes for lithium ion batteries

The cycling performance of a silicon/carbon composite anode has been significantly enhanced by using acrylic adhesive and modified acrylic adhesive as binder to fabricate the electrodes for lithium ion batteries. The capacity retentions of Si/C composite electrodes bound by acrylic adhesive and modified acrylic adhesive are 79% and 90% after 50 cycles, respectively. These two binders are electrochemically stable in the organic electrolyte in the working window. They also show larger adhesion strength between the coating and the Cu current collector as well as smaller solvent absorption in the electrolyte solvent than polyvinylidene fluoride (PVDF). Furthermore, sodium carboxyl methyl cellulose (CMC) plays an important role on improving the properties of acrylic adhesive, which increases the adhesive strength of acrylic adhesive and improves the activation of the electrodes.     

Nitrogen fertilizer use in rainfed agriculture

Agronomic efficiency (AE) is defined as the increase in economic yield of a crop per unit fertilizer applied. Components of AE are physiological efficiency and apparent recovery fraction. The latter can be further separated into uptake efficiency and availability index. Ways to increase the nitrogen fertilizer use efficiency in rainfed agriculture through fertilizer management are discussed.     

Evaporative light scattering mass detection for high-performance liquid chromatographic analysis of sucrose polyester blends in cooking oils

A high-performance liquid chromatographic method is described to determine the sucrose polyester (SPE) content in seven blends of cooking oils. Four gel-permeation chromatography (GPC) columns were used in series with an evaporative light scattering mass detector to separate the SPE from the acylglycerols in the final chromatogram. The SPE fraction was collected off the GPC column and injected onto a reverse-phase C-18 column for quantitation with sucrose octaacetate as an internal standard and a gradient of nonaqueous solvents as mobile phase. The chromatograms were interference-free, with only two sharp peaks appearing. The standards were linear from 500 to 5000 μg/mL with a correlation coefficient of r=0.999. The mean percent recovery (n=9) and standard deviation were 102±6.7. The detector could detect amounts as low as 5 μg SPE.     

Reduction of NO2 stored in a commercial lean NO x trap at low temperatures

Isothermal storage of NO₂ and subsequent reduction with different reducing agents (H₂, CO or H₂ + CO) in a lean NO _x trap catalyst was tested by Temperature Programmed Desorption (TPD) and Temperature Programmed Reduction (TPR) experiments at temperatures representative of automotive “cold-start” conditions (<200 °C) using a commercial NO _x trap catalyst. Results from the TPR experiments revealed that no reduction of stored NO₂ to N₂ was observed at 100–180 °C, and at 200 °C 10% reduction only of NO₂ to N₂ was measured. A special affinity of H₂ to form NH₃ was observed during the reduction of stored NO₂. The formation of NH₃ increases with increasing amount of stored NO₂ and decreases with increasing storage temperature. Direct relation exists between the amount of adsorbed and/or stored NO₂ and the formation of H₂O and NH₃.     

Al2O3-SiC-C质主铁沟浇注料的结合相研究

对高炉主出铁沟用Al2O3-SiC-C质浇注料的结合相变化进行了分析，其中涉及到溶胶结合、氮化硅铁为添加物形成的sialon结合、水泥形成的水硬性结合。溶胶结合强度主要来自于化学结合；而sialon结合、水泥结合的强度仍然来自少量水泥形成的水硬性凝固相的作用，因此对烘烤工艺、使用效果的影响不同。     

碳沉积法制富氮用炭分子筛的研究

本文提出的碳沉积法是用煤焦油馏分油的有机溶液浸渍煤炭化物,然后热解以进行“孔调变”。确定了最佳工艺条件,制得富氮性能良好的炭分子筛。并用D-A方程求取了各种样品的微孔结构参数。     

煤中吡啶型氮热解机理的量子化学研究

用密度泛函 ( DFT)方法 ,在 UB3LYP/6- 31 G( d)水平上研究了煤中吡啶型氮的热解机理 ,对热解过程中由于官能团周围环境的不同而形成的三类吡啶自由基进行了量子化学计算 ,通过对键的 Mulliken布居数等计算结果的分析 ,分别得到了这三类自由基的热解途径 .并优化得到了反应物、中间体和产物的几何构型 .计算结果表明 ,吡啶型氮主要是以 HCN的形式释放出来的 .NH3 是 HCN二次反应的产物 .