离子液体催化C_5馏分中二烯烃的聚合反应

合成了多种基于1-丁基-3-甲基咪唑阳离子的离子液体,并作为裂解C5馏分中混合二烯烃聚合反应的介质。考察了离子液体种类、反应温度、反应时间和添加Lew is酸对混合二烯烃聚合反应的影响。实验结果表明,以硝酸根为阴离子的离子液体对混合二烯烃的聚合反应具有一定的阻聚作用;以六氟磷酸根为阴离子的离子液体能明显促进混合二烯烃的聚合反应,提高二聚物的含量;添加Lew is酸(质量分数为1%的ZnCl2)的离子液体对混合二烯烃的聚合反应具有更明显的促进作用,其效果仅次于酸性氯铝酸类离子液体,反应温度以30℃以下为宜,温度过高将促使二聚物进一步聚合,形成三聚物乃至多聚物,降低二聚物的含量。     

Human urine - Chemical composition and fertilizer use efficiency

Stored human urine had pH values of 8.9 and was composed of eight main ionic species (> 0.1 meq L^–1), the cations Na, K, NH₄, Ca and the anions, Cl, SO₄, PO₄ and HCO₃. Nitrogen was mainly (> 90%) present as ammoniacal N, with ammonium bicarbonate being the dominant compound. Urea and urate decomposed during storage. Heavy metal concentrations in urine samples were low compared with other organic fertilizers, but copper, mercury, nickel and zinc were 10–500 times higher in urine than in precipitation and surface waters. In a pot experiment with¹⁵N labelled human urine, higher gaseous losses and lower crop uptake (barley) of urine N than of labelled ammonium nitrate were found. Phosphorus present in urine was utilized at a higher rate than soluble phosphate, showing that urine P is at least as available to crops as soluble P fertilizers.     

Role of pH and Ionic Strength on Water Relationships in Washed Minced Chicken-breast Muscle Gels

ABSTRACT The relationship between pH, ionic strength, and water balance of chicken-breast muscle gels was investigated. An increase in gel pH (pH 6.4 to 7.4) without added NaCl led to dramatic increases in water-holding capacity and water uptake (P < 0.05). Gels at 150 mM NaCl exhibited less ability to adsorb water than salt-free gels (P < 0.05 at pH 6.8 to 7.4) and had lower water-holding capacities (P < 0.05) and fold scores at and below pH 7. Varying salt concentration of the gel-bathing solutions had dramatic effect on the water uptake of the gels. The results show that strong water-absorbing gels can be produced at low ionic strengths and suggest that the negative charge of the muscle proteins is the driving force for water uptake and retention.     

Extraction of fission palladium by Aliquat 336 and electrochemical studies on direct recovery from ionic liquid phase

The wide electrochemical window and ion exchange properties of a room-temperature ionic liquid (RTIL) have been exploited for the extraction of palladium from nitric acid medium into ionic liquid phase — followed by direct electrodeposition of the metal from the organic phase. Extraction of palladium by commercial Aliquat 336 ionic liquids, tri-n-octylmethylammonium chloride (TOMAC) and tri-n-octylmethylammonium nitrate (TOMAN), was studied as a function of [HNO₃], [NO₃⁻] and [TOMAN]. The distribution ratio (D_Pd(II)) of palladium in TOMAN increased with an increase in the concentration of nitric acid and passed through a maximum at 1.0 M nitric acid. In contrast, the D_Pd(II) value of palladium in TOMAC decreased continuously with an increase in the concentration of nitric acid. Substantial amounts of water and nitric acid were also co-extracted into the organic phase with palladium.     

超声波辅助合成离子液体及其性能研究

以超声波辅助法合成了离子液体1丁-基-3-甲基咪唑氟硼酸盐([BM Im]BF4),对产物进行了光谱分析、电导率和粘度测定,并考察了其酯化反应的催化性能.实验结果表明:该合成方法具有合成条件简单、反应时间短、能耗低、易纯化等优点.[BM Im]BF4在甲醇中的最大紫外吸收波长为213 nm,IR图谱与文献报道吻合;分别以丙酮、无水乙醇和乙酸乙酯为溶剂,测得[BM Im]BF4的极限摩尔电导率分别为237.94 S·cm2·mol -1、47.22 S·cm2·mol-1和1.5411 S·cm2·mol-1.     

河套盆地晚更新世以来黄河改道对高砷地下水分布的控制机制

针对河套盆地开展了历时多年的水文地质环境地质调查,利用采集的298组浅层地下水样品以及收集并甄选的382个水文地质钻孔记录分析发现:河套盆地内95%的高砷地下水(As质量浓度10μg/L)集中在黄河决口、改道形成的古河道影响带及黄河决口扇裙带。其中,盆地南部首次发现了较为集中的高砷地下水,其分布范围与黄河北岸的晚更新世以来黄河决口、改道形成的4个大型决口扇,在空间上有着良好的对应关系。黄河古河道带及决口扇裙带表现为较强的还原环境及蒸发浓缩作用以及较弱的地表水补给强度。受pH值、含铁氧化物的还原性溶解等因素影响,决口扇裙带浅层地下水中砷的含量略低于平原中部黄河古河道带。结果表明:黄河古河道带及决口扇裙带特定的沉积环境控制着地下水的水文地球化学过程,进而对高砷地下水的分布具有决定性的作用。     

Study of viscosity of mono-, di-, and trialkylamines

Viscosities of several mono-, di-, and trialkylamines have been measured in the temperature range 298 to 333 K. It is observed that viscosities are highly dependent on shape, size, and association through H-bond or through dipole. Following the transition state theory, energy, Gibbs free energy, and entropy of activation of viscous flow have been calculated. The values of expansion energy for these liquids have also been calculated using free volume theory, and subsequently amines have been classified as volume-restrained or energy-restrained liquids. The group contribution method of Van Velzen, Cardozo, and Langenkamp for estimating viscosity has been examined with the present and literature data, and the new group contribution increments N _i and B _i for amines have been evaluated.     

Mixed Micelles of Surface Active Ionic Liquid (SAIL)–Octylphenol Ethoxylate: A Novel Reaction Medium for Selective Oxidation of Toluene to Benzaldehyde

Ionic liquids have been found to be suitable alternatives to volatile organic solvents in chemical transformation. Through a proper choice of cations and anions, the properties of an ionic liquid can be tuned so that it resembles an amphiphile. Such specially designed molecules are known as surface-active ionic liquids (SAIL). Like conventional surfactants, SAIL also form aggregates in an aqueous medium. Studies show that the mixing of SAIL with conventional surfactants leads to synergistic micellization. However, very few reports are available on the application of such systems as reaction media. Present study focuses on the application of mixed micelles of 1-tetradecyl-3-methylimidazol-1-ium bromide, ([C₁₄mim]Br) with nonionic surfactant, Octylphenol ethoxylate with 10 moles of ethylene oxide (OPE-10). Enhanced solubilization and selective catalytic oxidation of toluene using hydrogen peroxide as an oxidant and tungstic acid as a catalyst have been studied in detail using this system.     

3D Printing Conductive Composites with Poly(ionic liquid) as a Noncovalent Intermedia to Fabricate Carbon Circuits

In this study, a kind of imidazole type poly(ionic liquid) ([PEP-MIM]Cl) is synthesized, which can disperse carbon effectively. [PEP-MIM]Cl is used as an intermediate to coat carbon on the poly(acrylic acid)(PAA-co-MBA) via ion exchange to obtain conductive polymer composite (CPC). A series of characterizations are performed. Experiments show that carbon can be coated on the PAA-co-MBA uniformly, and compared with using carbon as filler, this method requires less carbon to achieve good conductive performance. The carbon layer on the polymer's surface is enriched via the swelling-shrinking properties of PAA-co-MBA according to the SEM images. Furthermore, in combination with 3D printing technology, PAA-co-MBA can be designed into different shapes to achieve various functions such as pressure-sensing element. Finally, a new type of CPC named carbon clad polymeric laminate (CCPL) is prepared by using the carbon coating method and 3D printing technology. It has the potential to replace copper clad laminate (CCL) and printed circuit board (PCB), to a certain extent. This technology expands the preparation method and application of the CPC such as flexible and wearable conductive fabrics.