Mixtures of poly(vinyl chloride) and copolyesters based on ε‐caprolactone and L‐lactide: Miscibility,thermal stability,and weathering resistance

Properties of the blends of Poly(vinyl chloride) (PVC) and poly(ε‐caprolactone) (PCLO) and copolyesters based on ε‐caprolactone and L‐lactide (LLA) prepared by rolling were studied. Incorporating the LLA units into the structure of PCLO the content of the crystalline phase was controlled. Miscibility of the blends was assessed using DMA, and basic mechanical properties were correlated with the type and content of the polymer plasticizer. The PVC blends containing up to 20 wt parts polyesters were miscible. The presence of the LLA units in the copolyester influenced negatively the thermal stability. On the other hand even small content of copolyester in the blend enhanced the resistivity against aging. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Morphological study on thermal treatment and degradation behaviors of solution-grown poly(l-lactide) single crystals

Morphological changes of solution-grown crystals (SGCs) of poly(l-lactide) (PLLA) following thermal treatment and enzymatic degradation were investigated using atomic force microscopy in terms of defects in the crystals. PLLA SGCs were grown from a dilute solution of acetonitrile at 5 °C. The obtained solution-grown monolamellar crystals have a lozenge-shaped morphology containing unique dimensions, with one side measuring 12 μm. To investigate enzymatic degradation behavior, PLLA SGCs were incubated in buffered solution with proteinase-K at 37 °C. The initial stage of enzymatic degradation of PLLA SGCs with proteinase-K occurs in loosely folding chains at the surface of the crystal. Thermally treated PLLA SGCs below the melting temperature showed an increase of the lamellar thickness of the SGCs at the treated temperature and partial surface erosion following enzyme exposure. These results indicate that less ordered chains exist throughout the lamellae and their thermal-induced chain extension makes them more susceptible to enzyme attack.     

Preparation and in vitro release behavior of urapidil hydrochloride loading into microspheres based on poly(L‐lactide)

Microencapsulation of the antihypertensive drug urapidil hydrochloride was investigated as a means of controlling drug release and minimizing or eliminating local side effects. Poly(L ‐lactide) (PLLA) microspheres were prepared using an alternative oil‐in‐water (O/W) solvent‐evaporation method such as the O/W cosolvent solvent‐evaporation method and O/W with various electrolytes added to the aqueous phase method. The surface morphology and the size of the microspheres were observed by scanning electron microscope. Meanwhile, the drug loading efficiency of microspheres and the in vitro release of urapidil hydrochloride from microspheres were performed. The release study indicated that the urapidil hydrochloride‐PLLA microspheres exhibited better sustained release capacity, and the kinetics of urapidil hydrochloride‐PLLA microspheres in vitro release could be described by the Higuchi equation. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of star‐shaped poly(ε‐caprolactone)‐b‐poly(L‐lactide) copolymers: From star architectures to crystalline morphologies

Hexa‐armed star‐shaped poly(ε‐caprolactone)‐block‐poly(L ‐lactide) (6sPCL‐b‐PLLA) with dipentaerythritol core were synthesized by a two‐step ring‐opening polymerization. GPC and ¹H NMR data demonstrate that the polymerization courses are under control. The molecular weight of 6sPCLs and 6sPCL‐b‐PLLAs increases with increasing molar ratio of monomer to initiator, and the molecular weight distribution is in the range of 1.03–1.10. The investigation of the melting and crystallization demonstrated that the values of crystallization temperature (T_c), melting temperature (T_m), and the degree of crystallinity (X_c) of PLLA blocks are increased with the chain length increase of PLLA in the 6sPCL‐b‐PLLA copolymers. On the contrary, the crystallization of PCL blocks dominates when the chain length of PLLA is too short. According to the results of polarized optical micrographs, both the spherulitic growth rate (G) and the spherulitic morphology are affected by the macromolecular architecture and the length of the block chains. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

High-Impact PLA in Compatibilized PLA/PCL Blends: Optimization of Blend Composition and Type and Content of Compatibilizer

In this work, the effectiveness of seven commercial compatibilizers is tested in polylactide (PLA)/poly(ε-caprolactone) (PCL) blends with different compositions to obtain a high-impact PLA. None of the compatibilizers is effective for 90/10 and 80/20 PLA/PCL compositions, as no improvement of the impact strength is observed. For the 70/30 composition, compatibilizers having glycidyl methacrylate (GMA) and acrylate groups in their structure are proved the most effective, as the morphological change towards co-continuity induced by them leads to significant impact strength improvements (of ≈345% and 90% with respect to the neat PLA and the noncompatibilized PLA/PCL 70/30 blend, respectively). The 70/30 PLA/PCL composition, as it shows the best balance of properties, and the best compatibilizer (ElvaloyPTW) are chosen to carry out the optimization of the compatibilizer content. It is found that adding 6 phr to the blend results in highly toughened and ductile blends while maintaining a high modulus and yield strength values. Larger compatibilizer contents lead to even higher impact strength values, but the low-strain mechanical properties are notably reduced. Thus, in this work, a simple and easily scalable method to produce high-impact PLA is shown, as it implies the compounding of three commercially available components without involving any toxic solvents.     

Thermosensitive nanoparticles prepared from poly(N‐isopropylacrylamide‐acrylamide‐vinilpyrrolidone) and its blend with poly(lactide‐co‐glycolide) for efficient drug delivery system

Temperature‐responsive polymers have become increasingly attractive as carrier for the injectable drug delivery systems. In the present work, we have studied the preparation of poly(N‐isopropylacrylamide‐acrylamide‐vinilpyrrolidone) (NIPAAm‐AAm‐VP terpolymer) nanoparticulated terpolymer and its blend with poly(lactide‐co‐glycolide, PLGA; molar ratio of lactide/glycolid 1/3). Thermosensitive terpolymer, poly(NIPAAm‐AAm‐VP) was prepared by free‐radical polymerization in aqueous solution. The nanoparticles of poly(NIPAAm‐AAm‐VP) and its blend with PLGA containing naltrexone were prepared using the evaporation and w/o emulsion‐solvent evaporation methods, respectively. Nanoparticles prepared from terpolymer‐PLGA blend at low polymer concentration (5%) shows larger particle size (>300 nm) and higher drug content%. Various types of nanoparticles showed a burst release of less than 10% after 24 h . The results suggest that by regulating different variables, desired release profiles of naltrexone can be achieved using a blend of PLGA‐poly(NIPAAm‐AAm‐VP) nanoparticulate system. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

聚乳酸的合成研究

聚乳酸是一种具有良好生物相容性、可降解的高分子材料,被广泛应用于医用领域,受到越来越多的关注。聚乳酸的合成主要有两种方法：乳酸直接缩聚和丙交酯的开环聚合。文中综述了近年来聚乳酸合成研究的最新进展,讨论了直接合成时的反应条件对聚乳酸分子量的影响,似及不同催化剂对丙交酯开环聚合的影响,介绍了聚乳酸聚合的一种高效方法——反应挤出法,并展望了聚乳酸合成研究的前景。     

Physical and thermal properties of l‐lactide/ϵ‐caprolactone copolymers: the role of microstructural design

Understanding the underlying role of microstructural design in polymers allows for the manipulation and control of properties for a wide range of specific applications. As such, this work focuses on the study of microstructure–property relationships in l‐ lactide/?‐caprolactone (LL/CL) copolymers. One‐step and two‐step bulk ring‐opening polymerization (ROP) procedures were employed to synthesize LL/CL copolymers of various compositions and chain microstructures. In the one‐step procedure, LL and CL were simultaneously copolymerized to yield P(LL‐stat‐CL) statistical copolymers. In the two‐step procedure, poly(l‐ lactide) (PLL) and poly(?‐caprolactone) (PCL) prepolymers were synthesized in the first step before CL and LL respectively were added in the second step to yield P[LL‐b‐(CL‐stat‐LL)‐b‐LL] and P[CL‐b‐(LL‐stat‐CL)‐b‐CL] block copolymers as the final products. The findings reveal that, in addition to the copolymerization procedure employed, the length and type of the prepolymer play important roles in determining the chain microstructure and thereby the overall properties of the final copolymer. Moreover, control over the degree of crystallinity and the type of crystalline domains, which is controlled during the polymer chemistry process, heavily influences the physical and mechanical properties of the final polymer. In summary, this work describes an interesting approach to the microstructural design of biodegradable copolymers of LL and CL for potential use in biomedical applications. © 2019 Society of Chemical Industry     

Influence of aliphatic polycarbonate middle block on mechanical and microstructural behaviour of triblock copolymers based on poly(l‐lactide) and polycarbonate

Three different ABA‐type triblock copolymers each containing biodegradable aliphatic polycarbonate as the middle block and poly(l ‐lactide) as the outer blocks were synthesized and the influence of the methylene chain length of the aliphatic polycarbonate middle block on various properties of the triblock copolymers was evaluated. Differential scanning calorimetry and wide‐angle X‐ray diffraction studies revealed that the incorporation of the outer blocks reduced the crystallinity of the middle aliphatic polycarbonate block. Variation of methylene chain length of the middle block led to a change in morphology from spherical to cylindrical as evidenced from atomic force microscopy studies. In addition, the mechanical properties of the block copolymers showed semi‐ductile to quasi‐brittle behaviour depending upon the composition of the middle block which was also confirmed using scanning electron microscopy. Dynamic mechanical analysis of the triblock copolymers indicated that storage modulus increased with a decrease in methylene chain length. © 2018 Society of Chemical Industry     

Crystallization and phase separation in blends of high stereoregular poly(lactide) with poly(ethylene glycol)

The effect of cooling rate on crystallization and subsequent aging of high stereoregular poly(lactide) (PLA) blended with poly(ethylene glycol) (PEG) was studied by thermal analysis and by direct observation of the solid state structure with atomic force microscopy (AFM). Blending with PEG accelerated crystallization of PLA. When a PLA/PEG 70/30 (wt/wt) blend was slowly cooled from the melt, PLA crystallized first as large spherulites followed by crystallization of PEG. The extent of PLA crystallization depended on the cooling rate, however, for a given blend composition the PEG crystallinity was proportional to PLA crystallinity. The partially crystallized blend obtained with a cooling rate of 30 °C min⁻¹ consisted of large spherulites dispersed in a homogeneous matrix. The blend was not stable at ambient temperature. With time, epitaxial crystallization of PEG on the edges of the spherulites depleted the surrounding region of PEG, which created a vitrified region surrounding the spherulites. Further from the spherulites, the homogeneous amorphous phase underwent phase separation with formation of a more rigid PLA-rich phase and a less-rigid PEG-rich phase. Decreasing the amount of PEG in the blend decreased the crystallization rate of PLA and increased the nucleation density. The amount of PLA crystallinity did not depend on blend composition, however, PEG crystallinity decreased to the extent that PEG did not crystallize in a PLA/PEG 90/10 (wt/wt) blend.