Influence of aliphatic polycarbonate middle block on mechanical and microstructural behaviour of triblock copolymers based on poly(l‐lactide) and polycarbonate

Three different ABA‐type triblock copolymers each containing biodegradable aliphatic polycarbonate as the middle block and poly(l ‐lactide) as the outer blocks were synthesized and the influence of the methylene chain length of the aliphatic polycarbonate middle block on various properties of the triblock copolymers was evaluated. Differential scanning calorimetry and wide‐angle X‐ray diffraction studies revealed that the incorporation of the outer blocks reduced the crystallinity of the middle aliphatic polycarbonate block. Variation of methylene chain length of the middle block led to a change in morphology from spherical to cylindrical as evidenced from atomic force microscopy studies. In addition, the mechanical properties of the block copolymers showed semi‐ductile to quasi‐brittle behaviour depending upon the composition of the middle block which was also confirmed using scanning electron microscopy. Dynamic mechanical analysis of the triblock copolymers indicated that storage modulus increased with a decrease in methylene chain length. © 2018 Society of Chemical Industry     

Enhanced crystallization of poly(lactide) stereocomplex by xylan propionate

The effect of xylan propionate (XylPr) as a novel biomass‐derived nucleating agent on the poly(lactide) sterecomplex was investigated. Addition of XylPr to an enantiomeric blend of poly(l ‐lactide) (PLLA) and poly(d ‐lactide) (PDLA) was performed in either the solution state or molten state. The solution blend of PLLA/PDLA with XylPr was prepared by mixing equal volumes of 1 wt% XylPr/PLLA and 1 wt% XylPr/PDLA solutions in chloroform and precipitating in methanol. The solution blend with XylPr showed shorter half‐time crystallization than the solution blend without XylPr in isothermal crystallization between 80 and 140 °C, although homocrystallization occurred. Enhanced stereocomplex crystallization in the solution blend with XylPr was observed at 180 °C, where no crystallization occurred in the solution blend without XylPr. Addition of XylPr to PLLA/PDLA blend in the molten state was performed at 240 °C. Thereafter, the melt blend of PLLA/PDLA with or without XylPr was either quenched in iced water or isothermally crystallized directly from the melt. Isothermal crystallization of the melt‐quenched blend with XylPr gave a similar result to the solution blend with XylPr. In contrast, the melt‐crystallized blend with XylPr formed only stereocomplex crystals after crystallization above 140 °C. Furthermore, the melt‐crystallized blend with XylPr showed a higher crystallinity index and melting temperature than the melt‐crystallized blend without XylPr. This shows that XylPr promotes stereocomplex crystallization only when the blend of PLLA/PDLA with XylPr is directly crystallized from the molten state just after blending. © 2016 Society of Chemical Industry     

High-Impact PLA in Compatibilized PLA/PCL Blends: Optimization of Blend Composition and Type and Content of Compatibilizer

In this work, the effectiveness of seven commercial compatibilizers is tested in polylactide (PLA)/poly(ε-caprolactone) (PCL) blends with different compositions to obtain a high-impact PLA. None of the compatibilizers is effective for 90/10 and 80/20 PLA/PCL compositions, as no improvement of the impact strength is observed. For the 70/30 composition, compatibilizers having glycidyl methacrylate (GMA) and acrylate groups in their structure are proved the most effective, as the morphological change towards co-continuity induced by them leads to significant impact strength improvements (of ≈345% and 90% with respect to the neat PLA and the noncompatibilized PLA/PCL 70/30 blend, respectively). The 70/30 PLA/PCL composition, as it shows the best balance of properties, and the best compatibilizer (ElvaloyPTW) are chosen to carry out the optimization of the compatibilizer content. It is found that adding 6 phr to the blend results in highly toughened and ductile blends while maintaining a high modulus and yield strength values. Larger compatibilizer contents lead to even higher impact strength values, but the low-strain mechanical properties are notably reduced. Thus, in this work, a simple and easily scalable method to produce high-impact PLA is shown, as it implies the compounding of three commercially available components without involving any toxic solvents.     

Small-angle X-ray scattering studies on melting and recrystallization behaviors of poly(oxyethylene) crystallites in poly(d,l-lactide)/poly(oxyethylene) blends

Direct determination of the discrete distribution for crystalline lamellar thickness has been performed for poly(d,l-lactic acid)/poly(oxyethylene) (PDLLA/PEG) blends by conducting small-angle X-ray scattering (SAXS) measurements using synchrotron radiation. The PDLLA used was an random (racemic) copolymer of bio-based poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) with the lactide monomer ratio of l:d = 50:50. It is known that PLA is miscible with PEG in the amorphous state. In the current paper, we report comprehensive results on structural analyses of PDLLA/PEG blends in the course of heating and cooling process using SAXS to elucidate the change in the thickness distribution of the lamellae. As a consequence, it was found that the distribution of the lamellar thickness moves toward the larger value (in other words, lamellar thickening) as temperature approaches the melting point. Typically, the thickness distribution was dispersed in the range of 10–20 nm at room temperature and it changed toward 40 nm in the vicinity of the melting temperature. To the best of our knowledge, this is the first report of direct determination of the discrete distribution for the crystalline lamellar thickness and their in-situ changes in the course of the lamellar thickening process. As a result, the lamellar thickening was found to occur at much lower temperature for the blend samples with 10% and 20% of PDLLA contents as compared to the PEG 100% sample. This phenomenon can be ascribed to the melting point depression owing to the miscibility between PEG and PDLLA. Thereby, thinner lamellae were melted and thicker ones appeared at much lower temperature for the blends than for the PEG 100% sample. As for the average repeating distance (long period) of the lamellar stacks, an abrupt increase similar to the critical divergence was observed (from 25 nm to 50 nm) in the heating process. Not only for the melting behavior but also in the course of recrystallization, change in the lamellar-thickness distribution was uncovered, which shows strong hysteresis depending on what temperature the sample was cooled down from.     

Fully biobased biodegradable poly(l‐lactide)‐b‐poly(ethylene brassylate)‐b‐poly(l‐lactide) triblock copolymers: synthesis and investigation of relationship between crystallization morphology and thermal properties

Well‐defined poly(l ‐lactide‐b‐ethylene brassylate‐b‐l ‐lactide) (PLLA‐b‐PEB‐b‐PLLA) triblock copolymer was synthesized by using double hydroxyl‐terminated PEBs with different molecular weights. Gel permeation chromatography and NMR characterization were employed to confirm the structure and composition of the triblock copolymers. DSC, wide‐angle X‐ray diffraction, TGA and polarized optical microscopy were also employed to demonstrate the relationship between the composition and properties. According to the DSC curves, the cold crystallization peak vanished gradually with decrease of the PLLA block, illustrating that the relatively smaller content of PLLA may lead to the formation of a deficient PLLA type crystal, leading to a decrease of melting enthalpy and melting temperature. Multi‐step thermal decompositions were determined by TGA, and the PEB unit exhibited much better thermal stability than the PLLA unit. Polarized optical microscopy images of all the triblock samples showed that spherulites which develop radially and with an extinction pattern in the form of a Maltese cross exhibit no ring bond. The growth rate of the spherulites of all triblock samples was investigated. The crystallization capacity of PLLA improved with incorporation of PLLA, which accords with the DSC and wide‐angle X‐ray diffraction results. © 2019 Society of Chemical Industry     

Biodegradations of statistical copolymers composed of D,L‐lactide and cyclic carbonates

Syntheses and biodegradation of statistical copolymers of D ,L ‐lactide (D ,L ‐LA) with trimethylene carbonate (TMC), rac‐1‐methyltrimethylene carbonate (1‐MTMC) and 2,2‐dimethyltrimethylene carbonate (2,2‐DTMC) were investigated at various monomer ratios using SmMe(C₅Me₅)₂THF as an initiator at 80 °C for 24 h in toluene. Biodegradations of poly(D ,L ‐LA‐co‐racemo‐1‐MTMC) (95/5) and poly(D ,L ‐LA‐co‐2,2‐DTMC) (98/2) with a compost at 60 °C proceed rapidly. Enzymatic degradations of these polymers were also performed using cholesterol esterase, lipoprotein lipase and proteinase K. Only poly(D ,L ‐LA‐co‐TMC) was biodegraded with cholesterol esterase, while poly(TMC), poly(1‐MTMC), poly(2,2‐DTMC) and poly(D ,L ‐LA) were barely degraded with these enzymes. Biodegradations of poly(D ,L ‐LA‐co‐TMC) (87/13) and poly(D ,L ‐LA‐co‐racemo‐1‐MTMC) (95/5) are rapid using proteinase K. Physical properties of these copolymers were also described. © 2003 Society of Chemical Industry     

Influence of graphene nanoplatelet incorporation and dispersion state on thermal,mechanical and electrical properties of biodegradable matrices

Graphene nanoplatelets (GNPs) were used as multifunctional nanofiller to enhance thermal and mechanical properties as well as electrical conductivity of two different biodegradable thermoplastics: poly lactide (PLA) and poly (butylene adipate-co-terephthalate) (PBAT). Morphological investigations showed different levels of GNP dispersion in the two matrices, and consequently physical properties of the two systems exhibited dissimilar behaviours with GNP incorporation. Crystallinity of PLA, determined from differential scanning calorimetry, was observed to increase markedly with addition of GNPs in contrast to the decrease in crystallinity of PBAT. Isothermal and non-isothermal thermogravimetric analyses also revealed a more significant delay in thermal decomposition of PLA upon addition of GNPs compared to that of PBAT. Furthermore, results showed that increasing GNP content of PLA and PBAT nanocomposites influenced their Young’s modulus and electrical conductivity in different ways. Modulus of PBAT increased continuously with increasing GNP loading while that of PLA reached a maximum at 9 wt% GNPs and then decreased. Moreover, despite the higher conductivity of pure PBAT compared to pure PLA, conductivity of PLA/GNP nanocomposites overtook that of PBAT/GNP nanocomposites above a certain GNP concentration. This demonstrated the determining effect of nanoplatelets dispersion state on the matrices properties.     

聚乳酸的合成及其应用

综述了聚乳酸的合成方法，介绍了其生产应用现状。     

Poly(lactide) nanofibers produced by a melt‐electrospinning system with a laser melting device

A new melt‐electrospinning system equipped with a CO₂‐laser melting device was developed. Rod‐like samples were prepared from poly(lactide) pellets, and then fibers were produced from the samples using the new system. The effects of producing conditions on the fiber diameter were investigated. Furthermore, the physical properties of the fibers were investigated. The following conclusions were obtained: (i) in a special case, fibers having an average fiber diameter smaller than 1 μm could be obtained using the system developed; (ii) the fiber diameter could be decreased with increased laser output power, but the physical properties of the fibers such as the melting point and the molecular weight were decreased; and (iii) the electrospun fibers exhibited an amorphous state, and the annealed fibers exhibited an isotropic crystal orientation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1640–1645, 2007     

Physical properties and enzymatic hydrolysis of poly(L‐lactide)–TiO2 composites

Amorphous poly(L ‐lactide) (PLLA) composite films with titanium dioxide (TiO₂) particles were prepared by solution‐casting using methylene chloride as a solvent, followed by quenching from the melt. The effects of surface treatment, volume fraction, size, and crystalline type of the TiO₂ particles on the mechanical properties and enzymatic hydrolysis of the composite films were investigated. The tensile strength of the PLLA composite films containing TiO₂ particles except for anatase‐type ones with a mean particle size of 0.3–0.5 μm was lowered and the Young's modulus became higher with increasing the content of TiO₂ particles. The tensile strength of the composite films containing anatase‐type TiO₂ with a mean particle size of 0.3–0.5 μm at contents of 20 wt % or less was almost the same as that of the pure PLLA film. The enzymatic hydrolysis of PLLA matrix was accelerated by the addition of the hydrophilic anatase‐type TiO₂ particles (nontreated or Al₂O₃ treated) with a mean particle size of 0.3–0.5 μm at relatively high contents such as 20 wt %. On the other hand, the enzymatic hydrolysis of PLLA matrix was inhibited by composite formation with the hydrophobic rutile‐type TiO₂ particles (Al₂O₃‐stearic acid treated, or ZrO₂‐Al₂O₃‐stearic acid treated). These results suggest that the mechanical properties and enzymatic hydrolyzability of the PLLA can be controlled by the kind and amount of the added TiO₂ particles. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 190–199, 2005