A NEW LARGE CAVITATION CHANNEL IN CHINA SHIP SCIENTIFIC RESEARCH CENTER

1 .　INTRODUCTIONIntherecentdecades ,itisrealizedthatitisquitenecessarytocarryouttestsathighReynoldsnumberwithalowbackgroundnoiselevelinordertomeetmoreandmoreurgentneedsofmodernnavyandmaritimeindustry .Anewlargecavita tionchannelisdevelopedinCSSRCfortestingcompletehull/ propulsor/appendagesarrange ments[1] .Itrepresentsoneofthelatestintechno logicallyadvancedlargecavitationtestfacilities.Inthefollowingsections ,thefeaturesandthefirsttestresultsofthechannelwillbedescribed .2 .　DICRIP…     

冷轧厂酸洗机组3号横剪大流量中高压液压系统设计方案探讨

在宝钢２０３０ｍｍ冷轧厂酸洗机组中，为了满足厚规格ＩＦ钢的生产，拟将原有的气动式剪切机改成液压式剪切机。为此，设计了一套中高压大流量的液压系统以满足３号横剪大剪切力（最高达７００ｋＮ）和快速剪切（３秒／次）的需要。由于采用了蓄能器增速回路和二通插装阀控制技术，使该液压系统较传统的剪切机液压系统具有响应速度快、体积小、重量轻、发热少和降低电机能耗等优点。     

Detection and analysis of transition from annular to intermittent flow in vertical tubes

In vertical co-current gas-liquid flow, the transition from annular to intermittent flow occurs when gas core becomes interrupted by liquid bridges due to the instability of the interfacial capillary waves. An analytical model is formulated to explain the liquid bridging in terms of the growth of finite amplitude interfacial capillary waves. Experimental results show that the longest wave length, which is associated with the transition, is about eight times the wave length of waves moving with the velocity of the liquid film.     

金刚石薄膜中晶粒尺寸的研究

扫描电子显微研究表明，化学汽相沉积的金刚石薄膜中晶粒大小比较均匀。但随着沉积时间和薄膜厚度的增加，晶粒逐渐变大，且每一层内，存在少量的大金刚石颗粒，讨论了晶粒尺寸变化和大晶粒形成的原因和机制。     

水闸闸室化算梯形横截面上不平衡剪力的分配计算

当地弹性地基梁法计算非岩石地基的水闸底板应力时，首先要求解出不平衡剪力，当闸墩截面选择梯形时（主要是边墩），常用方法是作图法，这既有误差又繁琐。所以就此推导出一个公式，可直接求解平衡剪力。     

圆杆弹性和弹—塑性扭转公式的探讨

对圆杆在线弹性阶段，弹－塑性阶段和全塑性阶段的扭转剪应力的计算公式作了分析，并推导了在材料的应力－应变关系（τ－γ关系）不服从虎克定律时，扭转真实剪应力的计算公式。文中对扭转强度计算公式的来源，物理含义及其都作了详细的说明。这对执行和理解国家ＧＢ１０１２８－８８《金属室温扭转试验方法》是有益的，而且对高校中材料力学的教学具有一定的参考价值。     

Off-Optimum Cure of Aerospace Epoxy Adhesives

Four epoxy film adhesives used in aircraft manufacture and repair have been examined to establish the effect of deviation from the cure cycle specified by the manufacturer. In addition to the variation of the cure cycle, two surface preparations of the aluminium adherends (chromic acid etch or grit blast followed by silane treatment) were evaluated. Thermal analysis was used to examine the cure envelope of the adhesive, and its extent of cure and glass transition temperature. The adhesive properties were assessed by shear strength (in both single lap joints and in Iosipescu configuration), durability (Boeing wedge test) and chemical resistance to selected aggressive fluids. The sensitivity of the performance of a particular adhesive to offoptimum cure conditions depends on its composition and needs to be determined, not predicted.     

An efficient assumed strain element model with six DOF per node for geometrically non-linear shells

The present paper describes an assumed strain finite element model with six degrees of freedom per node designed for geometrically non-linear shell analysis. An important feature of the present paper is the discussion on the spurious kinematic modes and the assumed strain field in the geometrically non-linear setting. The kinematics of deformation is described by using vector components in contrast to the conventional formulation which requires the use of trigonometric functions of rotational angles. Accordingly, converged solutions can be obtained for load or displacement increments that are much larger than possible with the conventional formulation with rotational angles. In addition, a detailed study of the spurious kinematic modes and the choice of assumed strain field reveals that the same assumed strain field can be used for both geometrically linear and non-linear cases to alleviate element locking while maintaining kinematic stability. It is strongly recommended that the element models, described in the present paper, be used instead of the conventional shell element models that employ rotational angles.     

纵向零序电压保护新方案及其应用

由于结构设计的原因，综合性能较好的一些保护方案如横差保护和不完全纵差保护等将不能应用于大型超临界汽轮发电机。文中重点讨论了纵向零序电压保护方案的改进及其在应用中的问题。研究表明，发电机发生匝间短路故障时3次谐波电势减小，而机组外部故障时发电机3次谐波电势增大。因此，为了提高纵向零序电压保护方案的性能，可以根据故障时3次谐波电压增量的特性作为选取制动量的依据，从而提高保护性能。亦即:当3次谐波电压表现为负增量时，制动量取为0或接近0;而当3次谐波电压表现为正增量时，以该增量值作为制动量。此外，对匝间保护纵向零序电压元件增加一个小延时是可行的，它可以提高保护躲暂态3次谐波影响的能力。仿真计算表明，比例制动式纵向零序电压保护能可靠区分内外部故障，符合大型超临界汽轮发电机的保护要求。     

Quantity,controls and functions of large woody debris in Midwestern USA streams

Large woody debris (LWD) can increase stream habitat heterogeneity by providing structure, altering flow patterns, enhancing sediment deposition, forming pools and retaining organic matter. In North America, the role of LWD has been studied extensively in streams of mature forests (e.g. Pacific Northwest), but few studies have assessed LWD in streams of younger forests (e.g. Midwestern USA). Our objectives were to: (1) quantify the volume and abundance of LWD in a set of Midwestern streams; (2) evaluate possible factors influencing LWD quantity; (3) identify the functional roles of LWD; and (4) compare LWD levels in the upper Midwest to those elsewhere in North America. In 2002 and 2003, we measured LWD and geomorphological variables in 15 low‐gradient streams draining previously logged watersheds in the Upper Peninsula of Michigan. Mean (±SE) LWD volume (0.77 ± 0.12 m³ 100 m⁻²) and abundance (33 ± 3 pieces 100 m⁻¹) were 71% and 10% lesser, respectively, than in streams of similar gradient elsewhere in North America. Channel shape (width:depth ratio) explained 30% of the variation in LWD volume (multiple stepwise regression, P = 0.015) while LWD length and length:channel width combined, explained 72% of the variation in LWD density (multiple stepwise regression, P < 0.0001). About 50% of the LWD either stored sediment or stabilized banks and 14% of the LWD formed pools, although pool density was not significantly related to LWD volume or density. LWD levels, overall, were low in upper Midwestern streams, but the relative importance of that LWD to ecosystem function may be magnified in these wood‐poor systems. Copyright © 2006 John Wiley & Sons, Ltd.