Nitrogen transformations during hydrolysis and nitrification of urea

Nitrogen transformations occurring in ten soils fertilized with urea were determined during incubation in the laboratory for four weeks. Urea was applied at one rate, but with different placement methods. Urea was applied in solution, as prills with a 1 cm grid spacing and as prills with no spacing. Unfertilized soils and soils amended with KNO₃ solution were included as controls.Nitrite accumulated in the majority of soils treated with urea, and the maximum nitrite concentration measured was directly related to initial soil pH. Cumulative gaseous N losses as percentages of applied N were: NH₃, 0-59.6; N₂, 0-4.9; N₂O, 0-9.9; KMnO₄-N, 0-1.3; CH₃ONO, 0-<0.1. No gaseous N evolution was detected in control treatments. Gaseous N losses were correlated with soil pH (NH₃) maximum NO ₂ ^- concentration (N₂, N₂O, KMnO₄-N) and organic C content (N₂, N₂O). Fertilizer placement effects were generally not significant and were small in comparison with differences between soils.

---

Resumo Foram determinadas, durante incubação em laboratório por quatro semanas, as transformações do nitrogênio ocorridas em dez solos fertilizados com uréia. A uréia foi aplicada a um só nivel, mas com diferentes métodos de aplicação: em solução e em grânulos com 1 cm de espaçamento de grade e em grânulos sem espaçamento. Solos não fertilizados e solos corrigidos com solução de KNO₃ foram incluidos como controles.O nitrito acumulado na maioria dos solos tratados com uréia e a concentração máxima de nitrito medido foram diretamente relacionados ao pH inicial do solo. As perdas cumulativas de N gasoso tomadas em percentagens de N aplicado foram: NH₃, 0-59.6; N₂, 0-4.9; N₂O; 0-9.9; KMnO₄-N, 0-1.3; CH₃ONO, 0-<0.1. Não foi detectada liberação de N gasoso nos tratamentos de controle. As perdas de N gasoso foram relacionadas com o pH do solo (NH₃), concentração máxima de NO ₂ ^- (N₂, N₂O, KMnO₄-N) e teor de C orgânico (N₂, N₂O). Efeitos da aplicação de fertilizante não foram de um modo geral significativos e foram pequenos em comparação com as diferenças entre os solos.

     

乙炔清净液的循环回用

乙炔清净液循环回用技术解决了乙炔清净液循环回用中硫、磷等杂质的累积问题和排放水中硫、磷含量超标的问题。不仅达到安全生产,而且做到清洁生产和水资源循环利用。     

Sulfur‐free lignin as reinforcing component of styrene–butadiene rubber

The potential application of lignin biopolymer as a component of styrene–butadiene rubber was examined with regard to its ability to reinforce the vulcanizates. It was shown that the sulfur‐free lignin preparation improved physicomechanical properties of rubber. The determination of the coefficient of lignin activity confirmed that lignin acts as an active filler. FTIR characteristics of lignin isolated from the vulcanizate containing 20 phr lignin indicated its interaction with the sulfur system, resulting in formation of noncyclic sulfide structures. In the case of higher lignin amount in the vulcanizate, some interfacial interaction between lignin and SBR may occur. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 924–929, 2005     

间歇窑窑墙温度场图形仿真研究

本文利用有限差分法求解间歇窑窑墙中的温度分布，并用Ｃ语言设计了窑墙温度场图形仿真软件。输入窑墙厚度和材料的物性参数等，系统可进行窑墙温度场分布的实时仿真及窑炉结构与操作的优化     

High-performance dispersant of coal–water slurry synthesized from wheat straw alkali lignin

Environmental concerns have stimulated interest in utilizing plant-derived materials in various industrial fields. The main objective of the present study was to synthesize a new type of high-performance lignin series dispersant of coal–water slurry (CWS) from wheat straw alkali lignin (WAL), and determine the affecting factors in the reaction and the application performance for CWS preparation. The experimental results showed that the inherent viscosity and the sulfonic group content of the modified wheat straw alkali lignin (MSL) are the key factors affecting its dispersing effect for CWS. In the reaction, the reactant mass concentration and the sulfonating agent amount were changed to obtain the MSL with different inherent viscosities and sulfonic group contents, and the MSL with intermediate inherent viscosity (6.0 ml/g) and higher sulfonic group content (1.80 mmol g^− 1) was found to have excellent dispersing effect for CWS. The MSL obtained from optimized process was used as dispersant for CWS preparation, the studies of the properties of CWS showed that MSL has similar dispersing effect with naphtalenesulfonate–formaldehyde condensate, and far better dispersing effect than lignosulphonate. Recently this kind of new dispersant has been applied in several power plants in China.     

重金属在宽叶香蒲人工湿地系统中的分布与积累

本文通过对广东韶关凡口宽叶香蒲（Typha latifolia)人工湿地系统的进出水口，土壤剖面及四种优势植物体各部分器官中Pb,Zn,Cu和Cd含量进行分析。结果表明；重金属主要库存于土壤中。从水平上看，全量的重金属含量从进水口到出水口呈上升趋势，而有效态则相反；从土壤剖面的垂直分布上看，全量和有效态重金属含量都随土壤深度的增加而递减，四种植物都具有较强的吸收和富集重金属的能力，且主要富集在植物的地下部分。     

定量~(13)C-NMR谱表征蔗渣碱木素结构

从蔗渣纸浆黑液中制出纯蔗渣碱木素，然后测定其定量13C-NMR谱．图谱分析表明，蔗渣碱木素主要由紫丁香基，愈创木基和对羟苯基三种丙烷结构单元组成，其中未绩合的紫丁香基、愈创木基和对羟羊基含量比为2.2：1．0：1．4．蔗渣碱术素结构单元间主要以β-O－4烷基芳基醚键连接，也有一定量的非环状α-醚键存在．蔗渣碱木素中，相当部分对香豆酸类结构并非通过酯键而是通过醚键或碳双键连接于芳核上．     

Spray Drying Performance of a Laboratory Spray Dryer for Tomato Powder Preparation

This work investigates the performance of a spray dryer for tomato powder preparation by spray drying of tomato pulp. Samples of tomato pulp with a 14% constant total solids concentration were used, and a pilot scale spray dryer (Buchi, B-191) with cocurrent operation and a two-fluid nozzle atomizer was employed for the spray drying process. Twenty-four different experiments were conducted keeping constant the feed rate, the feed temperature, and the atomizer pressure, and varying the compressed air flow rate, the flow rate of drying rate, and the air inlet temperature. In each experiment the air outlet temperature was recorded. Data for the residue remaining in the chamber and cyclone walls was gathered and two types of efficiencies were calculated as an indication of the spray dryer performance. Analysis of experimental data yielded correlations between residue accumulation and the variable operating conditions. The same operating parameters had a great influence on the air outlet temperature whereas temperature deviations were observed comparing measured air outlet temperatures with corresponding outlet adiabatic saturation temperatures.     

Moisture adsorption characteristics of a thin bed of polycrystalline potash pellets: Part I. Experimental study

This study is an experimental investigation of heat and moisture transfer within a packed bed of polycrystalline, porous potash pellets. Experiments were first performed to determine the moisture uptake characteristics on individual pellets subject to a step-change in relative humidity. Then a bed of pellets was subjected to flows of humid air on the upper boundary and a cold impermeable surface on the lower boundary resulting in a temperature gradient across the bed. Temperature and moisture content were measured within the bed. It was found that moisture uptake is less for potash pellets and they are less likely to cake than granular and standard potash when subjected to the same ambient air conditions. This is due to the porous nature of the pellet and its nearly uniform size and spherical shape.     

用木质素磺酸铵作标准化试剂提高单偶氮、双偶氮酸性染料的冷水溶解度的方法

一般的酸性染料溶解度较小,而本文所介绍的单或双偶氮酸性染料,实际上是以碱金属盐的形式存在,由于加入了（按重量计）80％～30％的木质素磺酸铵,改善了室温的冷水溶解度。木质素磺酸铵既作为标准化试剂,用来调节高强度染料到稳定的商品染料,同时又能提高染料在室温时冷水溶解度。