液氨储罐保冷改造效果评定

作者结合实例，论述了氨罐保冷改造的设计、选材及施工，给出了改造后两年的测试结果，并对测试结果进行了分析。     

柴油机针阀体的乙炔低压渗碳

乙炔低压渗碳可以有效地避免在真空渗碳过程中产生炭黑和焦油，同时由于乙炔具有较高的供碳能力，使这一技术尤其适用于针阀体这样的小直径深盲孔零件。     

宽低温STN—LCD加热装置的研制

本文介绍了宽低温ＳＴＮ－ＬＣＤ加热装置的设计和制备方法，并对低温加热的实验结果进行了讨论和分析，相应的研究结果表明此法有利于拓宽ＳＴＮ液晶显示器的负温工作范围。     

碾压混凝土坝施工进度与质量控制的新措施

碾压混凝土重力坝和拱坝由于连续施工的坝体混凝土体积大，施工期间需要采取较为严格的温度控制措施，而所采取的温控措施是否有效，目前尚没有一个能够用于实际施工过程的快速有效的评估方法和方式，不能根据已施工坝体内的实际情况来控制施工进度和质量。利用分布式光纤温度测量系统来快速地获得坝体混凝土内部的大量温度信息，进而实际标定温度仿真程序并通过标定过程模拟拟施工的连续碾压层，以检验其温控措施的有效性。通过坝体内部的温度、温度变化速率和梯度来达到实时控制坝体碾压上升速度、坝面和仓面养护、以及冷缝灌浆处理等目的。     

Steady-state torque control system with secondary-current feedback for three-phase squirrel-cage induction motors

This paper presents a highly stable steady-state torque control system with a feedback of a secondary current signal. The torque control system is constructed with a feedback of the secondary current (I₂) signal using a quick response magnetic-field sensor constructed with an amorphous core multivibrator bridge, which can solve the secondary resistance change problem for temperature variation in the IM. Moreover, we added a state feedback to the system to improve the response speed for the unit step function of a torque order. The I₂ sensor method has advantages especially at a low-speed range, in which conventional method using an integrator shows control errors.     

Pyrolysis of tertiarybutylphosphine at low pressure

The pyrolysis of tertiarybutylphosphine (TBP) has been studied in the low pressure conditions used for chemical beam epitaxy (CBE). The pyrolysis studies were carried out in low pressure reactors of two different configurations, one of which is a cracker cell designed for use in a CBE system. The reaction products were studied using a quadrupole mass spectrometer. The products observed are accounted for by a reaction mechanism involving homolysis of the parent TBP molecule to produce PH₂ and C₄H₉ radicals. These undergo subsequent reactions to form the stable products C₄H₈, PH₃ and H₂, with smaller amounts of P and P₂ being produced. The production of the sub-hydride PH₂ using this cracker cell design indicates that the use of partially cracked TBP may be a promising technique for reducing the amount of carbon incorporated into the growing epitaxial layer.     

步进式加热炉炉温优化设定模型及软件开发

针对线材厂步进式加热炉实际工况，提出了基于经验规则的炉温优化设定模型和在线自学习获取知识的思想，并以炉温优化设定模型为核心，开发出加热炉计算机控制系统的优化运行软件。     

Fluidization of the active component of catalysts in catalytic formation of carbon assisted by iron and nickel carbides

A series of vanadium-tin mixed oxide catalysts have been prepared by the solid-state reaction of V₂O₅ and SnO₂ at 1250°C. The fresh and the used catalysts have been characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). High temperature oxygen chemisorption (HTOC) has been employed to titrate the coordinatively unsaturated vanadia sites. Ammoxidation of mesitylene has been carried out on these catalysts and an optimum composition of vanadium is arrived at. Better yields of tricyanobenzene (TCB) compared to literature values are obtained. A good correlation between the oxygen uptake and the TCB yield extends the applicability of HTOC to the fused oxide system.IICT Communication No. 3507.     

High-temperature,high-pressure thermophysical measurements on liquid zinc

Wire-shaped zinc samples were resistively volume heated as part of a fast-capacitor discharge circuit. Time-resolved measurements with submicrosecond resolution of the current through the specimen, the voltage drop across it, and the thermal expansion of the specimen as a function of time allow determination of the enthalpy, electrical resistivity, and density at different temperatures up to superheated liquid states of zinc far above the normal boiling point. High static pressures, up to 3800 bar of the ambient medium water, were used. An estimate of the critical pressure for zinc is given by investigations of the stability of the sample with a framing CCD camera, taking pictures of different samples varying the ambient static pressure. The critical volume and the critical temperature are obtained by means of an extrapolation of measured data at different pressures.Paper presented at the Fourth International Workshop on Subsecond Thermophysics, June 27–29, 1995, Köln, Germany.     

MOSFET亚阈特性分析与低温按比例缩小理论的研究

器件尺寸按比例缩小是实现超大规模集成电路的有效途径，但寄生和二级效应却将器件限在一定的水平，本文在对比分析常温与低温下小尺寸器件效应的基础上，重点研究了ＭＯＳ器件亚阈特性对器件性能及按比例缩小的影响，并根据低温工作的特点，提出了ＭＯＳ器件一种低温按比例缩小规则，该原则对低温器的优化设计，从而更大程度在提高电路与系统性能具有重要的指导意义。