高坝通航技术在水口工程的新发展

水口水电站坝高101m,航运过坝采用一线三级船闸和一线垂直升船机。水口升船机是当时国内已建和在建同类升船机中总体规模最大的升船机,也是我国第一座自行设计、制造、施工和安装的大型升船机。在塔楼结构动力分析和试验研究、塔楼滑框倒模施工、升船机整体模型试验研究、承船厢整体制造和浮运、船厢安全锁定装置和船厢对接密封装置试验研究、整机安装及联调试验等方面充分体现了水口升船机的建成是高坝通航技术的新发展。     

Measurement Problems in Optical Monitoring Systems

A probabilistic image model is proposed. According to the model, the noise of the boundaries has the principal effect on the precision with which the dimensions of optical monitoring objects are measured. Results of theoretical and experimental investigations of measurement precision are presented. An approach to the determination of monitoring reliability and the selection of the resolution of a machine vision system based on structural requirements is formulated.     

DXDK-70型包装机常见故障分析处理

我公司使用天津华特DXDK-70型包装机4台，在生产中出现的主要问题及解决方法作了详尽阐述，以供同行探讨。     

Characterization and optimization of copper chemical mechanical planarization

The feature scale planarization of the copper chemical mechanical planarization (CMP) process has been characterized for two copper processes using Hitachi 430-TU/Hitachi T605 and Cabot 5001/Arch Cu10K consumables. The first process is an example of an abrasive-free polish with a high-selectivity barrier slurry, while the second is an example of a conventional abrasive slurry with a low-selectivity barrier slurry. Copper fill planarization has been characterized for structures with conformal deposition as well as with bumps resulting from bottom-up fill. Dishing and erosion were characterized for several structures after clearing. The abrasive-free polish resulted in low sensitivity to overpolish and low saturation levels for dishing and erosion. Consequently, this demonstrated superior performance when compared to the International Technology Roadmap for Semiconductors (ITRS) 2000 roadmap targets for planarization. While the conventional slurry could achieve the 0.13-μm technology node requirements, the abrasive-free polish met the planarization requirements beyond the 0.10-μm technology node.     

QUANTUM MECHANICAL MODEL AND SIMULATION OF GaAs/AlGaAs QUANTUM WELL INFRARED PHOTO- DETECTOR-Ⅰ OPTICAL ASPECTS

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｆｒａｒｅｄｄｅｔｅｃｔｏｒｔｅｃｈｎｉｑｕｅｈａｓｂｅｅｎａｋｅｙｆａｃｔｏｒｉｎｔｈｅｄｅｖｅｌｏｐｍｅｎｔｏｆｔｈｅｉｎｆｒａｒｅｄｔｅｃｈｎｏｌｏｇｙｆｏｒｍｏｒｅｔｈａｎ 4 0 ｙｅａｒｓ .Ｓｉｎｃｅ 1970 ,ｓｅｍｉｃｏｎｄｕｃｔｏｒｓｌｉｋｅＩｎＳｂａｎｄＨｇＣｄＴｅｈａｖｅｂｅｅｎｔｈｅｐｒｉｎｃｉｐａｌｍａｔｅｒｉａｌｓｆｏｒｖａｒｉｏｕｓｉｎｆｒａｒｅｄｄｅｔｅｃｔｏｒａｐｐｌｉｃａｔｉｏｎｓ .Ｔｈｅｆｏｒｍａｔｏｆｔｈｅｉｎｆｒａｒｅｄｄｅｔｅｃｔｏｒｍｏｔｉｖａｔｅｄｂｙｓｍａｒｔｔｈｅｒｍａｌｉｍａｇｉｎｇｓｙｓｔｅｍｃｈａｎｇｅｄｆｒｏｍｓｉｎｇｌｅｅｌｅｍｅｎｔｄｅｖｉｃｅｔｏｆｏｃａｌｐｌａｎａｒｒａｙｓ(ＦＰＡｓ)ｉｎｔｈｅｍｉｄｄｌｅｏｆ 80’ｓ [1].Ｔｏｄａｙ’ｓｔｅｃｈｎｏｌｏｇｙｏｆｉｎｆｒａｒｅｄｄｅｔｅｃｔｏｒｃｏｎｃｅｎｔｒａｔｅｓｌａｒｇｅｌｙｏｎｆｏｃａｌｐｌａｎａｒｒａｙｓ ,ｅｘｐｅｃｉａｌｌｙｆｏｒｓｅｎｓｉｔｉｖｅ ,ｈｏｍｏｇｅｎｅｏｕｓａｎｄｌａｒｇｅｆｏｒｍａｔｓｃａｌｅｄｅｖｉｃｅｓ .ＨｇＣｄＴｅ...     

辊式拉拔模用于连续拉拔机组的新技术

针对进口连续拉拔机组，独创设计了可配套使用的二连式辊模，并首次很好地解决了惯用模在辊模后的安装问题，是一种很有前途的新技术。     

青霉素发酵过程的智能优化控制

本文在分析青霉素发酵补糖工艺的要求和存在的问题基础上,设计出智能控制算法,采用集散系统实现在线优化控制,经实际应用,效果明显。     

Processing and microstructure of non-oxide ceramic fibres

Research and development efforts on high-temperature, oxidation-resistant fibres have increased over the past decade due to the demand for light-weight, stiff and strong composite materials in aerospace applications. Varieties of ‘high-performance’, continuous, non-oxide fibres with low-density, high tensile strength and tensile modulus have been developed either from organic precursors or via chemical vapour deposition for fabrication of ceramic matrix composites. Fibres derived from polymer precursors (e.g. Nicalon, Tyranno, HPZ) are small in diameter (compared to CVD monofilaments) and are ideally suited for ceramic composites. Processing, microstructural stability and mechanical properties of these newly developed SiC and Si₃N₄ base fibres are briefly reviewed in this paper.     

LMG200型可调高滚筒式露天采煤机

介绍了可调高滚筒式露天采煤机的结构特点及在露天煤矿应用所产生的效益和其广 阔的发展前景。     

微型无阀泵参数化结构设计及测试

 从理论计算和试验两方面研究了用于微流控化学分析芯片的微型无阀泵流动特性，初步建立了微型无阀泵流道结构的数学模型，重点讨论了结构参数的选取原则及相应的流动阻尼系数的计算方法． 通过试验验证了数值计算的可靠性，为微型无阀泵参数化设计及优化提供了理论依据及经验曲线．