改性SBS胶粘剂的研制

以丙烯酸酯类混合单体对SBS热塑性弹性体在混合溶剂中接枝共聚，添加混合型增粘树脂，研制成接枝改性的SBS胶粘剂，具有较高的初粘力和终强度。探讨了单体比例、引发剂用量、反应温度、反应时间、增粘树脂对胶液性能的影响。     

脂肪酸甲酯处理含苯胺工业废水

采用正交实验设计研究了用脂肪酸甲酯处理工业苯胺废水的条件。实验表明:在影响苯胺废水萃取效果的诸因素中,影响大小的顺序为pH值、油水相比、溶液初始浓度和温度。在pH值=7,油水相比为2∶1,20℃的最佳萃取条件下,高浓度苯胺废水经萃取剂脂肪酸甲酯三级萃取后,苯胺去除率达99.98%。     

Ionic liquid as reaction medium for the synthesis and crystallization of a metal-organic framework: (BMIM)2[Cd3(BDC)3Br2] (BMIM = 1-butyl-3-methylimidazolium, BDC = 1,4-benzenedicarboxylate)

An ionic liquid, 1-butyl-3-methylimidazolium bromide, is used as reaction medium for the synthesis and crystallization of a coordination polymer, (BMIM)₂[Cd₃(BDC)₃Br ₂] (1) (BMIM = 1-butyl-3-methylimidazolium, BDC =  1,4-benzenedicarboxylate), which forms an anionic two-dimensional framework with the imidazolium cations located between the layers. This compound is thermally stable up to ca. 340 °C and exhibits blue emission in solid state at room temperature. Other characterizations by IR and UV–visible spectra are also described.     

Study on the polymerization of ϵ‐caprolactam in the interlamellar spaces of [TEACOOH]–montmorillonite intercalations complex and its characterization

The polymerization of ?‐caprolactam between the interlamellar spaces of the [TEACOOH]–montmorillonite intercalations complex was attempted using Na–montmorillonite and 10‐carboxy‐n‐decyltriethylammonium bromide to achieve [TEACOOH]–polycaprolactam–montmorillonite, in which montmorillonite (inorganic polymer) is chemically bonded with the polycaprolactam (organic polymer). The results of X‐ray and IR analysis for the samples obtained after polymerization showed that the polymerization reaction has been successfully accomplished. For the purpose of studying the polymeric reaction product more precisely, we have isolated the polymerized product from the silicate layers and analyzed it with X‐ray diffractometer and IR spectrometer. Comparison of the results of X‐ray and IR analysis between the isolated polymer and the polymer that was synthesized by the reaction of ?‐caprolactam only with the organic cation without montmorillonite showed that both obtained polymers are the same compounds. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1904–1910, 2003     

压力条件下淀粉合成甲基葡萄糖苷

以淀粉、甲醇为原料 ,以酸为催化剂 ,在压力条件下合成甲基葡萄糖苷 (简称甲苷 ) ,得出最佳催化剂是浓硫酸。通过正交实验 ,考察了糖醇比、反应压力、催化剂用量及反应时间对合成甲苷的影响 ,得到合成甲苷的最佳条件为n(淀粉 )∶n(甲醇 ) =1∶30 ,压力 0 5MPa ,催化剂用量为淀粉质量的 5 % ,反应时间 12 0min ,收率达 98 9%。     

新型热管反应器在轻烃醚化中的研究及应用

将热管技术与催化反应器结合,构建了蛇形回路热管反应器。利用该反应器,进行了轻烃醚化工业侧线试验,考察了进料温度、液相体积空速、冷却水流量、进料浓度对反应结果的影响;测定了催化床层的轴向温度分布。利用反应器数学模型并结合试验数据,采用下山单纯形最优化方法获得了床层对热管的传热膜系数准数关联方程。所开发的新型热管反应器在2万t/a甲基叔丁基醚(MTBE)生产装置的扩能改造中应用成功。     

Quantitative preparation of long chain thioethers from an oxo-trans-2-enoic ester and a 9,12-dioxo-trans-10-enoic acid

Branched-chain thioethers have been prepared from methyl 4-oxo-trans-2-hexadecenoate and 9,12-dioxo-trans-10-octadecenoic acid. The reagents involved in these preparations were mercaptoacetic and mercaptopropionic acids. The yields of these thioethers are almost quantitative.     

非异氰酸酯法合成除草剂异丙隆

报道了以氯甲酸甲酯为起始原料合成除草剂异丙隆的方法。考察了原料配比,反应温度和反应时间对反应的影响。结果表明,氯甲酸甲酯法制除草剂异丙隆,总收率为82.7%,原药纯度达95%。     

甲酸甲酯合成与转化的催化技术

本文评述了甲酸甲酯(MF)合成与转化的催化技术,展示了从MF出发发展C_1化学的可能途径,在MF的合成方面详细地分析了从甲醇出发的羰化法、脱氢法和氧化法催化技术,简介了我们的有关研究工作。     

粗苯甲酸甲酯醇解合成苯甲酸丁酯的工艺研究

研究开发了由对苯二甲酸二甲酯生产过程中副产物粗苯甲酸甲酯合成苯甲酸丁酯的工艺过程。分酯过量与醇过量两种情况分别考察了反应配料比、催化剂用量、反应温度和回流比对转化率的影响 ,确定了最佳工艺条件。实验表明 ,在钛酸酯存在下 ,当醇酯摩尔比为 1.5∶1、催化剂用量为 1%、回流比为 2∶2时 ,反应转化率达 82 .79%。