二维和三维Gauss随机粗糙面的Monte Carlo仿真

通过二维Gauss随机粗糙面的相关函数及其表面谱密度函数,应用Monte Carlo方法,建立了二维Gauss随机粗糙面模型,并采用均方根高度和相关长度对随机粗糙表面的高度起伏影响进行了特性分析,将二维的推导方法扩展到三维,建丑了三维Gauss随机粗糙面模型。     

一种自适应入位固持装置及试验研究

为解决飞机数字化装配中难以对机身大部件增加辅助固持并保持大部件位姿不变的技术难题,提出一种基于气浮和万向球座的大部件位姿跟随固持方法,并设计制造称之为随动定位器的专用柔性工装.结合某工程,进行定位器关键参数的分析计算和相关工艺试验研究,并对油压波动、相关零件磨损对锁紧力的影响以及芯轴自由端关键参数选择与入位可靠性问题进行了研究.结果表明,在芯轴角度偏差较小时,随动定位器可以在确保大部件位姿不被破坏的情况下,实现芯轴的小阻力自适应入位,并可以根据选定的工作油压和配合间隙可靠固持大部件,其性能可以满足工程要求.     

微波辐射提取桔皮中橙皮苷的研究

以乙醇溶液为提取溶剂,采用微波辐射提取桔皮中的橙皮苷,考察了溶剂浓度、微波功率、微波辐射时间、液料比等因素对橙皮苷提取量的影响.正交试验优化显示：溶剂体积浓度55%、微波提取功率400 W、辐射时间70 s和液料之比15∶1（质量比）时,橙皮苷的提取率为41.05%,比无微波辐射提取提高了14.21%.     

Effects of decomposing rice straw on growth of and nitrogen fixation byRhizobium

Five phenolic compounds produced by decomposing rice straw and sterile extracts of decomposing rice straw in soil were very inhibitory to growth of three strains ofRhizobium. The effects were additive and in several instances synergistic. The phenolic compounds also reduced nodule numbers and hemoglobin content of the nodules in two bean (Phaseolus vulgaris) varieties. Extracts of decomposing rice straw in soil (same concentration as in the soil) significantly reduced N₂ fixation (acetylene reduction) in Bush Black Seeded beans. This may explain in part the great reduction in soybean yields in Taiwan following rice crops when the rice stubble is left in the field.     

Yield response of lentil to directly applied and residual phosphorus in a Mediterranean environment

The response of lentil grown under rainfed conditions to directly applied and residual phosphorus (P) was described by a modified Mitscherlich equation, accounting for the effects of rainfall on (1) potential yield, and (2) the availability of soil-P to the crop. The response of lentil yield to directly applied and residual P was studied in two-course cereal–lentil rotational trials under rainfed conditions in a Mediterranean-type environment. Cereal crops were grown at different P application rates during 4 growing seasons at 3 sites, representing different rainfall zones in northwest Syria. Lentil (Lens culinaris Med.) was grown during 4 seasons at the same sites, each lentil crop following a cereal crop. In 3 out of 4 lentil-growing seasons, additional P was applied to lentil in subplots to compare the residual and direct effects of P application. The initial contents of extractable soil-P (P-Olsen) were low at all sites, in the range of 2–5 ppm P. Under the conditions of the experiments, lentil appeared to benefit slightly more from P applied to the preceding wheat crop (residual P) than from directly applied P. It is shown that the modified Mitscherlich equation could be used as a basis for P fertilizer recommendations for rainfed farming. As for lentil, it was concluded that a single application of P to the wheat crop in a wheat/lentil rotation could reduce the cost of lentil production, without reducing lentil yield.     

多孔介质微波加热厚度的确定

简述了微波加热的机理，以湿木材为研究对象，通过理论计算确定了微波在木材中的穿透深度。计算表明：随着木材含水率和微波工作频率的增加，微波在木材中的穿透深度减小；当用频率为915MHz和2450MHz的微波加热或干燥具有高含水率的多孔介质时，多孔介质的最大厚度应分别控制在16cm和6cm以内。     

A free space frequency‐time‐domain technique for electromagnetic characterization of materials using reflection‐based measurement

In this report, a free space frequency‐time‐domain technique is presented for characterizing the electrical properties and thickness of the sample using multiple reflections and fabry‐perot resonance phenomenon. The retrieval of constitutive electromagnetic parameters of the sample has been carried out by comparing the measured reflection coefficient data from the sample at two different incident angles. The relative permittivity as well as relative permeability along with the thickness of different samples viz., beryllia, silicon, and plexiglass have been evaluated with high accuracy in the frequency range 1 to 15 GHz. The method is also experimentally validated by successfully reconstructing the unknown material properties of two different samples. The unique advantage of this method lies in non‐requirement of any prior knowledge of the sample's thickness for measuring the complex relative dielectric constant as well as relative permeability of the sample. To determine the electromagnetic properties of the sample, the sole knowledge of reflection coefficient data are needed. Moreover, the method does not involve any additional measurement for the reference calibration. The simple, cost‐effective proposed scheme is quite useful in many applications like accurate determination of signal strength in indoor wireless communication, through wall imaging, food industry, and so on.     

人体腰椎模拟植入椎弓根螺钉的有限元分析

利用三维绘图软件构建人体腰椎L4-L5节段几何模型,并模拟植入椎弓根螺钉.通过UG与Ansys Workbench的无缝接口将所建模型导入后者,对模型赋值并进行有限元分析,得出在人体站立情况下腰椎的应力云图与位移云图.从云图中可看出正常腰椎模型的最大应力出现在L4下关节突附近,值为15.073 MPa;最大位移出现在椎间盘上表面前部,值为0.161 mm.植入椎弓根螺钉的腰椎模型最大应力出现在螺钉的中部,值为38.613 MPa;最大位移出现在第4腰椎上端的前部,值为0.136 mm.结果表明：植入的椎弓根螺钉可缓解椎体的承载负担,并且可使腰椎变形减小.该结论可为同类腰椎固定手术以及脊柱的生物力学分析提供理论参考.     

基于GaAs电感模型的微波功率放大器

基于0.15μm砷化镓(GaAs)工艺建立一种电感模型,并用高频结构模拟器(High Frequency Structure Simulator,HFSS)仿真验证,并在此基础上设计一种微波功率放大器,并用高级系统设计软件(Advanced Design System,ADS)进行仿真。仿真结果显示在8¹2GHz频率范围内,饱和输出功率大于21.9dBm,1dB压缩点输出功率大于20dBm,功率增益大于26dB,功率附加效率大于34%,稳定系数大于1。     

Optimized sintering behavior and microwave dielectric properties of Ca1+2xSnSi2x+yO3+6x+2y by composition modulation

Ca_1+2xSnSi_2x+yO_3+6x+2y (0.1 ≤ x ≤ 0.9; 0.1 ≤ y ≤ 0.9) microwave dielectric ceramics were prepared through traditional solid-state reaction sintered at 1450°C–1500°C for 5 hours. The Ca₃SnSi₂O₉ second phase replaced the SnO₂ second phase of the Ca_1+2xSnSi_2xO_3+6x (x = 0, y = 0) ceramics by controlling the ratio of Ca:Sn:Si. The cracks of CaSnO₃ (x = 0, y = 0) ceramic were inhibited, the microwave dielectric properties were optimized by introducing the Ca₃SnSi₂O₉ second phase, and the CaSnO₃-Ca₃SnSi₂O₉ mixture system existed at (0.1 ≤ x ≤ 0.9, y = 0). The CaSnSiO₅ phase with positive τ_f value was related to the Si-rich in CaSnSi_yO_3+2y (x = 0; 0.1 ≤ y ≤ 0.9), and the coexistence of three and four phases was obtained at CaSnSi_yO_3+2y (0.1 ≤ y ≤ 0.9) ceramics. The CaSnSiO₅ phase appeared at CaSnSi_yO_3+2y (0.3 ≤ y ≤ 0.9) ceramics. The CaSnSi_yO_3+2y (y = 0.8) ceramic with 49.2 wt% CaSnSiO₅ phase exhibited excellent microwave dielectric properties: ε_r = 11.06, Q × f = 57,500 GHz (at 11.5 GHz), and τ_f = +8.1 ppm/°C.