Studies on microbridges of superconducting YBCO thin film

Critical current densities of the superconducting Y-Ba-Cu-O (YBCO) films have been observed to decrease with the increase of power of microwave radiation. Presence of Josephson type of junctions in the microbridges has been established from the microwave irradiation and magnetic field studies. BCS energy gap parameter (2/kT _c ) has been calculated from thedI/dV characteristics and found to be 3.7 at 13 K.     

不常用备件基于AHP的ABC分类模型

分析了传统ABC分类法在不常用备件库存分类中的应用,针对传统ABC分类法的缺陷.文章应用基于AHP的ABC分类方法,将备件单价、采购提前期、年采购费用、年使用次数、备件类型、重要性等级作为分类准则,对每一备件相对准则层进行ABC分类,然后结合准则层对目标层的权重计算备件组合权重并再次进行ABC分类,建立了不常用备件基于...     

Development of a tundra-specific snow water equivalent retrieval algorithm for satellite passive microwave data

Airborne and satellite brightness temperature (T_B) measurements were combined with intensive field observations of sub-Arctic tundra snow cover to develop the framework for a new tundra-specific passive microwave snow water equivalent (SWE) retrieval algorithm. The dense snowpack and high sub-grid lake fraction across the tundra mean that conventional brightness temperature difference approaches (such as the commonly used 37 GHz-19 GHz) are not appropriate across the sub-Arctic. Airborne radiometer measurements (with footprint dimensions of approximately 70 × 120 m) acquired across sub-Arctic Canada during three field campaigns during the 2008 winter season were utilized to illustrate a slope reversal in the 37 GHz T_B versus SWE relationship. Scattering by the tundra snowpack drives a negative relationship until a threshold SWE value is reached near 130 mm at which point emission from the snowpack creates a positive but noisier relationship between 37 GHz T_B and SWE.The change from snowpack scattering to emission was also evident in the temporal evolution of 37 GHz T_B observed from satellite measurements. AMSR-E brightness temperatures (2002/03-2006/07) consistently exhibited decreases through the winter before reaching a minimum in February or March, followed by an increase for weeks or months before melt. The cumulative absolute change (Σ|Δ37V|) in vertically polarized 37 GHz T_B was computed at both monthly and pentad intervals from a January 1 start date and compared to ground measured SWE from intensive and regional snow survey campaigns, and climate station observations. A greater (lower) cumulative change in |Δ37V| was significantly related to greater (lower) ground measured SWE (r² = 0.77 with monthly averages; r² = 0.67 with pentad averages). Σ|Δ37V| was only weakly correlated with lake fraction: monthly r² values calculated for January through April 2003-2007 were largely less than 0.2. These results indicate that this is a computationally straightforward and viable algorithmic framework for producing tundra-specific SWE datasets from the complete satellite passive microwave record (1979 to present).     

Highly efficient switched‐mode transmitter using a current mode class‐D RF amplifier

This article presents a switched‐mode transmitter architecture using a current mode class‐D (CMCD) amplifier. To achieve high average efficiency for a modulated signal the envelope of the complex baseband signal is transformed into pulses such that the CMCD amplifier is operated either at its peak efficiency or completely switched off. The CMCD amplifier has been designed based on single‐tone active harmonic load‐pull measurements to achieve a power‐added efficiency (PAE) of 61.5% with 25 W output power at 900 MHz using LDMOS FETs. Removing the losses of the demodulation filter and of the amplifier a 10% higher efficiency than in an ideal class‐B amplifier can be obtained for burst‐mode operation with a peak‐to‐average power ratio of 10 dB. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

Shape optimized design of microwave dielectric resonators by level‐set and topology gradient methods

The finite element method is coupled with the topology gradient (TG) and level‐set (LS) methods for optimizing the shape of microwave components using a computer‐aided design model. On the one hand, the LS approach is based on the classical shape derivative; while on the other hand, the TG method is precisely designed for introducing new perturbations in the optimization domain. These two approaches, which consist in minimizing a cost function related to the component behavior, are first described. Regarding given electrical specifications, these techniques are applied to optimize the distribution of ceramic parts of a dual‐mode resonator in order to improve its behavior. The optimized dielectric resonators result in a wide spurious‐free stop band. A comparison between classical and optimized dual mode resonator is presented. Theoretical results are then validated by careful measurements. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE 2010.     

Combined planning and scheduling in a divergent production system with co-production: A case study in the lumber industry

Many research initiatives carried out in production management consider process planning and operations scheduling as two separate and sequential functions. However, in certain contexts, the two functions must be better integrated. This is the case in divergent production systems with co-production (i.e. production of different products at the same time from a single product input) when alternative production processes are available. This paper studies such a context and focuses on the case of drying and finishing operations in a softwood lumber facility. The situation is addressed using a single model that simultaneously performs process planning and scheduling. We evaluate two alternative formulations. The first one is based on mixed integer programming (MIP) and the second on constraint programming (CP). We also propose a search procedure to improve the performance of the CP approach. Both approaches are compared with respect to their capacity to generate good solutions in short computation time.     

Potential of near-field microwave imaging in breast cancer detection utilizing tapered rectangular waveguide probes

Microwave imaging for medical applications has been of interest for many years. A novel near-field microwave non-invasive testing and evaluation (NIT&E) technique utilizing tapered rectangular waveguide probes is presented for breast cancer detection. Near-field microwave NIT&E techniques can be a successful candidate for the detection of breast cancer because of their potential in dealing with materials of low conductivity (i.e. lossy dielectrics like the breast tissue). The physical basis for breast tumor detection with microwave imaging is the contrast in dielectric properties of normal and malignant breast tissues. A method adopting Fourier transform matching (FTM) technique and utilizing the reflection coefficient at the aperture of a tapered rectangular waveguide sensor radiating into a breast is described resulting in microwave images that indicate the presence of a tumor. These images demonstrate the feasibility of detecting breast tumors using this approach.     

Explicit synchronisation of heterogeneous dynamics networks via three-layer communication framework

This paper addresses the explicit synchronisation of heterogeneous dynamics networks via three-layer communication framework. The main contribution is to propose an explicit synchronisation algorithm, in which the synchronisation errors of all the agents are decoupled. By constructing a three-layer node model, the proposed algorithm removes the assumptions that the topology is fixed and the synchronisation process is coupled. By introducing appropriate assumptions, the algorithm leads to a class of explicit synchronisation protocols based on the states of agents in different layers. It is proved in the sense of Lyapunov that, if the dwell time is larger than a threshold, the explicit synchronisation can be achieved for closed-loop heterogeneous dynamics networks under switching topologies. The results are further extended to the cases in which the switching topologies are only frequently but not always connected. Simulation results are presented with four single-link manipulators to verify the theoretical analysis.     

Correcting for the influence of frozen lakes in satellite microwave radiometer observations through application of a microwave emission model

The spatial resolution of passive microwave observations from space is of the order of tens of kilometers with currently available instruments, such as the Special Sensor Microwave/Imager (SSM/I) and Advanced Microwave Scanning Radiometer (AMSR-E). The large field of view of these instruments dictates that the observed brightness temperature can originate from heterogeneous land cover, with different vegetation and surface properties.In this study, we assess the influence of freshwater lakes on the observed brightness temperature of AMSR-E in winter conditions. The study focuses on the geographic region of Finland, where lakes account for 10% of the total terrestrial area. We present a method to mitigate for the influence of lakes through forward modeling of snow covered lakes, as a part of a microwave emission simulation scheme of space-borne observations. We apply a forward model to predict brightness temperatures of snow covered sceneries over several winter seasons, using available data on snow cover, vegetation and lake ice cover to set the forward model input parameters. Comparison of model estimates with space-borne observations shows that the modeling accuracy improves in the majority of examined cases when lakes are accounted for, with respect to the case where lakes are not included in the simulation. Moreover, we present a method for applying the correction to the retrieval of Snow Water Equivalent (SWE) in lake-rich areas, using a numerical inversion method of the forward model. In a comparison to available independent validation data on SWE, also the retrieval accuracy is seen to improve when applying the influence of snow covered lakes in the emission model.     

一类提取模糊规则的新方法及其在干燥建模中的应用

基于系统的输入－输出数据,提出一种通过划分输入空间撮模糊规则的方法,并将该方法应用于建模非线性程度较高物干燥过程。建模过程中,首先利用训练样本将输入空间动态地划分为若干个子空间,然后针对第一个子空间了生一条模糊规则,再将所产生的模糊规则共成一个模糊规则库,模糊逻辑系统的最终输出从模糊规则库中产生。仿真结果表明,该方法可很好地预测干燥系统的物料降水率,而且简单实用,十分可靠。