Dynamic buffering performance of the honeycomb paperboard filled with polyurethane

A new kind of composite buffering material was made by filling the voids of honeycomb paperboard with polyurethane. Drop tests were performed to evaluate the dynamic energy absorption capacity of the material. Based on the tests results, we analyzed the mechanical behaviors of the material under different conditions and obtained the inherent influencing laws of some factors on the material＇s dynamic buffering performance. It was shown that the dynamic buffering performance varied directly with impact velocity, and inversely with the void diameter, thickness and buffeting area of the composite material.     

我国宏观经济与证券市场关系的实证分析--基于名义 GDP 和上证指数发展速度的视角

宏观经济和证券市场的关系一直受到人们的关注,由于数据的选取和研究方法上的不同,导致宏观经济与证券市场的关系存在不同的结论或解释。从名义 GDP 和上证指数发展速度的视角,运用 HP 滤波以及 SVAR 等方法实证研究了宏观经济和证券市场的关系。研究发现：宏观经济和证券市场存在显著的因果关系;短期证券市场的波动是经济偶然性波动的预期,两者之间的滞后期效应与当期效应相互影响;方差分解表明宏观经济对于证券市场的长期贡献度很大。     

Effect of surface coating on the screw loosening of dental abutment screws

Regardless of the type of performed restoration, in most cases, a screw connection is employed between the abutment and implant. For this reason, implant screw loosening has remained a problem in restorative practices. The purpose of this study was to compare the surface of coated/plated screws with titanium and gold alloy screws and to evaluate the physical properties of coated/plated material after scratch tests via FE-SEM (field emission scanning electron microscopy) investigation. GoldTite, titanium screws provided by 3i (Implant Innovation, USA) and TorqTite, titanium screws by Steri-Oss (Nobel Biocare, USA) and gold screws and titanium screws by AVANA (Osstem Implant, Korea) were selected for this study. The surface, crest, and root of the abutment screws were observed by FE-SEM. A micro-diamond needle was also prepared for the scratch test. Each abutment screw was fixed, and a scratch on the surface of the head region was made at constant load and thereafter the fine trace was observed with FE-SEM. The surface of GoldTite was smoother than that of other screws and it also had abundant ductility and malleability compared with titanium and gold screws. The scratch tests also revealed that teflon particles were exfoliated easily in the screw coated with teflon. The titanium screw had rough surface and low ductility. The clinical use of gold-plated screws is recommended as a means of preventing screw loosening.     

40Cr钢渗氮过程中碳原子的迁移

将正火４０Ｃｒ钢样在不同温度下进行不同时间的气体渗氮，对其横断面进行波谱分析，发现渗氮前沿附近自始至终存在着典型的贫碳区，其两侧为富碳区，透射电镜分析结果表明，碳原子的重新分布包括碳化物的回溶、碳的扩散及碳化物长大三个过程。     

国外武器装备电磁环境适应性试验与评价技术及能力发展综述

武器装备的电磁环境适应性已成为制约武器装备能打仗、打胜仗的一个重大问题;西方军事强国非常重视面向复杂电磁环境的武器装备试验与评价技术研究和能力建设,通过相关投资计划的长期持续投入,支持突破其中的关键技术、方法,以及构建相应的试验与评价设施能力;文章从标准规范和研制程序、技术方法、试验设施、科研和能力建设投资计划等几方面综述了国外武器装备复杂电磁环境适应性试验与评价技术和能力发展情况,并在此基础上,提出了对我国武器装备电磁环境适应性试验与评价能力的发展建议.     

开关电源加速贮存寿命方法研究

开关电源具有体积小、重量轻、效率高等诸多优点,凭借其自身的诸多优势,开关电源已经广泛应用于航空航天、通信、以及电子类。由于应用领域的广泛性,开关电源的可靠性引起了人们的重视。论文以阿伦尼斯(Arrhenius)模型为基础,设计了一整套针对开关电源的可靠性评价和寿命预计的试验方案。该方案对试验器件施加温度应力,加速器件的失效过程,并通过一定的加速模型和统计分析方法,外推出正常工作条件下产品的寿命特征。     

An extension of likelihood-ratio-test for testing linear hypotheses in the baseline-category logit model

A new family of test statistics for testing linear hypotheses in baseline-category logit models is introduced and its asymptotic distribution is obtained. The new family is a natural extension of the classical likelihood ratio test. A simulation study is carried out to find new test statistics that offer an attractive alternative to the classical likelihood ratio test in terms of both exact size and exact power.     

Small sample improvements in the threshold cointegration test using residual-based moving block bootstrap

A residual-based moving block bootstrap procedure for testing the null hypothesis of linear cointegration versus cointegration with threshold effects is proposed. When the regressors and errors of the models are serially and contemporaneously correlated, our test compares favourably with the Sup LM test proposed by Gonzalo and Pitarakis. Indeed, shortcomings of the former motivated the development of our test. The small sample performance of the bootstrap test is investigated by Monte Carlo simulations, and the results show that the test performs better than the Sup LM test.     

基于VB开发试题库系统

系统以英语教育为背景进行设计,旨在提供一个适合形成性测试和阶段性测试的自动组卷系统,能快速方便地提供各种要求的试卷,帮助教师把握教学的进度,及时地反馈教学中的问题,以使改进教学方法和调整教学重点。     

Economic modeling of board test strategies

A long and deep recession, coupled with continuous competitive pressure to reduce costs, is forcing many companies to review their test strategies. Testing costs have become a more significant proportion of the overall manufacturing cost even though manufacturing yields have increased dramatically over the past ten or twelve years. This causes attention to be focused on testing costs as a key source of cost reduction. The increased use of DFT and the integration of design and test are very positive moves towards controlling testing costs but other methods employed can often backfire. The increased use of low priced testers is one such method. The pressure to reduce costs, higher process yields and exhortations that testing adds no value can lead the test engineering manager to take the cheap route. In reality this can often turn out to be an expensive decision. The only way to avoid expensive mistakes is to perform an economic analysis of the alternative courses of action. In most cases this is done, but not always in the right manner or with the necessary amount of detail to make the comparisons meaningful. This article discusses the need for effective cost analysis of test strategies and highlights some of the pitfalls.