Φ76mm自动轧管机组穿孔机顶杆小车的改进

通过校核Φ７６ｍｍ自动轧管机组穿孔机顶杆小车的轴承寿命，提出了顶杆小车的改进措施，如重新选配合适的轴承型号，修改有关装配尺寸等。改进后，顶杆小车的使用效果良好。     

叠轧薄板轧机轧辊轴承的改进

本文针对安阳钢铁公司薄板厂叠轧薄板轧机轧辊轴承轴瓦容易损坏、沥清润滑油冒烟起火这一问题，通过实验方法，找出了原因，并对大铜瓦进行了改进，取得了良好效果。     

我国第一套Φ170mm三辊轧管机组

介绍了我国第一套Φ１７０ｍｍ三辊轧管机组热轧设备和产品规格及技术特点。     

半连续式棒材轧机在线捆扎机及其工艺设置

由北京冶金设备制造厂设计的YSK6型钢丝捆扎机，共设有并列6台棒材捆扎车，每台捆扎车由中间收送机、成形捆扎机、液压装置、捆扎辊道和台车组合而成。按生产工艺参数要求，整个成型捆扎周期为30秒。捆扎后的棒材在成品称重时用电子秤，每称量一次均可打印出单次净值、累加值和累加次数值。     

三辊穿孔和轧管所产生的钢管壁厚极差和波浪形内螺纹

定量描述了实际生产过程中三辊斜轧穿孔所产生的钢管壁厚极差和波浪形内螺纹，初步探讨了三辊轧管机对钢管壁厚极差和波浪形内螺纹的影响。     

Φ450轧机厚控系统的改造设计

介绍对轧机厚控系统的改造设计,详细描述其控制系统硬件构成、软件设计、控制模型的组成及特点。     

An investigation into the occurrence of sewage fungus in rivers containing papermill effluents—IV. Growth in experimental channels dosed with effluents and pure compounds

Wastewaters from the manufacture of pulp and paper have given rise to problems of excessive microbial growth in rivers over a number of years. This paper is the first in a series of four articles describing research undertaken by PIRA at four U.K. paper/board mills (one integrated with pulp production) over the period 1978–1980. This first paper briefly reviews the published literature on sewage fungus growth from pulp and paper mill discharges up to 1978, but mainly describes previously unpublished work undertaken by PIRA over the period 1965–1975. This introductory paper thus provides a state-of-the-art review of methods to control sewage fungus growth from pulp and paper mill effluents prior to commencement of the research described in the following three articles.     

Quantity,controls and functions of large woody debris in Midwestern USA streams

Large woody debris (LWD) can increase stream habitat heterogeneity by providing structure, altering flow patterns, enhancing sediment deposition, forming pools and retaining organic matter. In North America, the role of LWD has been studied extensively in streams of mature forests (e.g. Pacific Northwest), but few studies have assessed LWD in streams of younger forests (e.g. Midwestern USA). Our objectives were to: (1) quantify the volume and abundance of LWD in a set of Midwestern streams; (2) evaluate possible factors influencing LWD quantity; (3) identify the functional roles of LWD; and (4) compare LWD levels in the upper Midwest to those elsewhere in North America. In 2002 and 2003, we measured LWD and geomorphological variables in 15 low‐gradient streams draining previously logged watersheds in the Upper Peninsula of Michigan. Mean (±SE) LWD volume (0.77 ± 0.12 m³ 100 m⁻²) and abundance (33 ± 3 pieces 100 m⁻¹) were 71% and 10% lesser, respectively, than in streams of similar gradient elsewhere in North America. Channel shape (width:depth ratio) explained 30% of the variation in LWD volume (multiple stepwise regression, P = 0.015) while LWD length and length:channel width combined, explained 72% of the variation in LWD density (multiple stepwise regression, P < 0.0001). About 50% of the LWD either stored sediment or stabilized banks and 14% of the LWD formed pools, although pool density was not significantly related to LWD volume or density. LWD levels, overall, were low in upper Midwestern streams, but the relative importance of that LWD to ecosystem function may be magnified in these wood‐poor systems. Copyright © 2006 John Wiley & Sons, Ltd.     

1422轧机滑块式万向接轴的故障及处理

以热轧板厂粗轧主传动滑块式万向接轴为例，分析了该接轴及接轴平衡机构的常见故障及其排除方法，提出了日常维护措施。     

Differentiation between epigeic and hypogeic fauna in gravel streams

The ‘hyporheic zone’ is described. According to the classical definition, water below the sediment surface is groundwater and the hyporheic interstitial zone is part of the phreatic system. This ignores the vertical distribution of the epigeic benthic fauna. The uppermost layer of the sediment (bed sediments) of the hyporheic zone is dominated by epigeic faunal elements and is therefore part of the surface system. In contrast to hypogeic species, the depth penetration of epigeic species is limited. Possible explanations are discussed.