2010-2020年深圳市机动车发展和油气需求量预测

介绍了深圳市机动车发展现状,分别用趋势外推法、城市比较分析法和分类法预测了2010-2020年深圳市的机动车保有量,最后预测了机动车的油气需求量。     

彩色半柔性混合料路用性能研究

彩色半柔性混合料是一种在开级配沥青混合料中填充水泥胶浆而形成的兼具沥青路面与水泥混凝土路面优点的彩色复合路面。利用车辙试验来评价彩色半柔性混合料的高温稳定性,用残留稳定度和冻融劈裂试验评价半柔性混合料的水稳定性。结果表明,半柔性混合料具有优良的高温稳定性和疲劳性能,水稳定性较好。     

An inverse solution methodology for estimating the diffusion coefficient of gases in Athabasca bitumen from pressure-decay data

An inverse solution methodology is developed for the estimation of diffusion coefficient of gases in highly viscous, oil-sands bitumens from isothermal, pressure-decay measurements. The approach involves modeling the rate of change in pressure using the diffusion equation for the liquid phase coupled with a mass balance equation for the gas phase. The inverse solution framework is utilized to arrive at two graphical techniques for estimating the diffusion coefficient. Both techniques involve the determination of the slope of a straight line resulting from plotting the experimental data in accordance with the developed model. An advantage of the proposed techniques is that the diffusion coefficient is estimated directly, i.e. without making it an adjustable parameter. The novelty of the proposed method is in its simplicity as well as its ability to isolate portions of the pressure-decay data affected by experimental fluctuations. The effect of the initial pressure on the predicted diffusion coefficient and pressure-decay profile was also investigated. The diffusion coefficients of CO₂, CH₄, C₂H₆ and N₂ in Athabasca bitumen at 50–90 °C and about 8 MPa were estimated and compared with literature values.     

Boundary knot method for 2D and 3D Helmholtz and convection–diffusion problems under complicated geometry

The boundary knot method (BKM) of very recent origin is an inherently meshless, integration‐free, boundary‐type, radial basis function collocation technique for the numerical discretization of general partial differential equation systems. Unlike the method of fundamental solutions, the use of non‐singular general solution in the BKM avoids the unnecessary requirement of constructing a controversial artificial boundary outside the physical domain. The purpose of this paper is to extend the BKM to solve 2D Helmholtz and convection–diffusion problems under rather complicated irregular geometry. The method is also first applied to 3D problems. Numerical experiments validate that the BKM can produce highly accurate solutions using a relatively small number of knots. For inhomogeneous cases, some inner knots are found necessary to guarantee accuracy and stability. The stability and convergence of the BKM are numerically illustrated and the completeness issue is also discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

Dynamic stiffness vibration analysis using a high‐order beam model

This work presents the derivation of the exact dynamic stiffness matrix for a high‐order beam element. The terms are found directly from the solutions of the differential equations that describe the deformations of the cross‐section according to the high‐order theory, which include cubic variation of the axial displacements over the cross‐section of the beam. The model has six degrees of freedom at the two ends, one transverse displacement and two rotations, and the end forces are a shear force and two end moments. Using the dynamic stiffness matrix exact vibration frequencies for beams with various combinations of boundary conditions are tabulated and compared with results from the Bernoulli–Euler and Timoshenko beam models. Copyright © 2003 John Wiley & Sons, Ltd.     

离子束混合工艺对材料抗蚀性能的影响

本文介绍了离子束混合工艺方法。与直接注入相比较,离子束混合所使用的设备造价低1/4—1/2,而生产效率可提高1—2个数量级,因而使生产成本大幅度降低,这无疑对离子束工艺的实际应用将产生巨大的促进作用。 通过对轴承材料(GCr15和Cr4Mo4V)经Cr、N、Ta不同元素的混合处理后,在0.5M H_2SO_4和0.1M NaCl的缓冲溶液中的阳极极化曲线表明经混合处理后的两种材料试样,其抗蚀能力和抗点蚀能力均大大提高,这与直接注入的试样效果是一致的。 通过俄歇谱仪和透射电镜的分析结果表明混合是成功的,且在一定的条件下,形成非晶组织。 本文的结论是,无论是离子的直接注入还是离子束混合,对提高轴承材料的抗腐蚀性能都是有效的方法,特别是离子束混合技术具有更大的应用前景。     

A new bubble-point-pressure correlation for the binary LiBr/H2O solution

In accord with the increasing concern about the global environmental issues, the absorption refrigeration heat-pump systems are currently being considered very promising and attractive. For the purpose of supporting the advanced R&D technology in this area, we have developed a novel correlation to represent the bubble-point pressures of LiBr H₂O solutions. The developed correlation covers the most extensive range of validity ever proposed: 273–483 K for temperatures, 0.05 kPa to 1.0 MPa for pressures. and 29 76 wt% LiBr for concentrations.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994. Boulder, Colorado, U.S.A.     

Substituted uracils as corrosion inhibitors for copper in 3% NaCl solution

Substituted uracils were tested as corrosion inhibitors of copper in 3% NaCl medium using electrochemical polarisation, impedance measurements and non-electrochemical techniques (weight loss, IR and UV-visible). This study permitted to follow the evolution of the inhibitory effect of the uracil derivatives, according to their substituents, on copper in 3% NaCl medium. Comparison of results showed that dithiouracil (DTUr) was the best inhibitor. The maximum inhibition efficiency reached 98% at 10⁻³ M. DTUr adsorbs on the copper surface according to the Frumkin isotherm model.     

具有偏差变元的Volterra型系统的周期正解

利用Mawhin重合度理论研究了一类具有偏差变元的Volterra型系统周期正解的存在性问题，得到了一个新的存在性定理。     

Ideal-gas thermodynamic properties for natural-gas applications

Calculating caloric properties from a thermal equation of state requires information such as isobaric heat capacities in the ideal-gas state as a function of temperature. In this work, values for the parameters of thec _p ⁰ correlation proposed by Aly and Lee were newly determined for 21 pure gases which are compounds of natural gas mixtures. The values of the parameters were adjusted to selectedc _p ⁰ data calculated from spectroscopic data for temperatures ranging from 10 to 1000 K. The data sources used are discussed and compared with literature data deduced from theoretic models and caloric measurements. The parameters presented will be applied in a current GERG project for evaluating equations of state (e.g., the AGA 8 equation) for their suitability for calculating caloric properties.