Crack Development in Individually Quick Frozen Cut and Peel Carrots

ABSTRACT:  Crack development during freezing (CDF) is one of the major challenges in individually quick frozen (IQF) cut and peel carrot processing. The effects of processing and freezer storage on crack development were examined on the cut and peel carrot variety, Sugarsnax. Carrot samples were removed from the major processing steps, the trans-slicer, the shaper, the blancher, and the dryer, and examined for crack development by measuring percentage cracked, crack morphology, total soluble solids, moisture levels, and membrane injury index immediately after processing. These parameters were also examined following 20 wk of standard freezer storage for cut and peels. Approximately 2% of nonprocessed carrots were cracked compared to 45% of carrots after the initial trans-slicing stage. As the processing continued, cracking decreased due to the removal of the outer epidermis to 16% of the finished product. This suggests that CDF was initiated at the 1st processing stage. Crack width and depth were 2.3 and 2.6 mm, respectively, at the trans-slicer stage and decreased to 1.1 and 1.8 mm at the end of the line. It was found that CDF was further exacerbated by freezer storage due to inefficient water removal at the dryer stage. Crack width and depth increased to 1.5 and 3.0 mm after 20 wk for freezer storage. Root size also played a role in CDF, suggesting that larger pieces are more susceptible to crack development. Total soluble solid concentrations did not play a role in crack formation during cut and peel processing.     

不甩线圈的多星形移相变极

对于某些槽数和极数比的多星形移相变极电机,提出与前人不同的是在两种极数下均不甩去线圈的绕组方案,使绕组利用率高,且线圈及其联接都较简单.这种绕组方案在一种极数下并联支路略有不平衡,其所引起的电机定子铜耗的增加是极其有限的,不致影响电机的正常运行.     

降低过滤机滤饼水分和细粒煤脱水浅析

根据对选煤厂细粒煤样的实验室优化脱水试验、工业试验及分析结果 ,对真空系统、气水分离器和分配头实施了技术改造 ,细粒煤脱水系统的运行状况得到显著改善 :圆盘真空过滤机滤饼水分降到 2 0 %左右 ,脱饼率在 95 %以上 ,每年的直接经济效益可达 30 0多万元     

高频MnZn功率铁氧体烧结工艺研究

按照氧化物陶瓷工艺对高频MnZn功率铁氧体烧结工艺条件进行了研究。烧结温度越高，晶粒越大，晶界越薄，电阻率越低，磁芯损耗越大，起始磁导率和烧结密度分别在1240℃和1230℃达到最大值。延长保温时间，可以使晶粒充分生长，晶界变薄，电阻率减小，损耗增大。保温3h后，起始磁导率和烧结密度均可达到最大值。氧分压越低，材料起始磁导率越高，电阻率越小，损耗越大，但氧分压低于5％后烧结密度不再继续增加。     

吐哈油田葡北3-12井超长封固段固井技术

葡北3-12注气井位于吐哈盆地葡北构造带中断葡北1号构造．井深为3610m。针对该区块地层承压能力低，易漏失，油气水窜严重，常规固井方法无法满足固井要求的问题，该井采用三段三凝制、常规水泥浆和泡沫水泥浆体系固井，并采用重钻井液顶替技术．降低施工压力。该技术能保证固井候凝过程中井底压力平衡，施工安全。现场应用表明，采用常规水泥浆和泡沫水泥浆固井技术．提高了低压易漏井、长封固井段的固井质量，解决了水泥返高不足的问题；并通过一次常规固井工艺实现了全井封固，简化了施工工艺，节约了成本，经济效益和社会效益十分显著。该井封固优质段累计达2600m，优质率达85％，固井结果良好。     

Water absorption properties of phosphate glass fiber‐reinforced poly‐ϵ‐caprolactone composites for craniofacial bone repair

The moisture uptake of polymers and composites has increasing significance where these materials are specified for invasive, long‐term medical applications. Here we analyze mass gain and the ensuing degradation mechanisms in phosphate glass fiber reinforced poly‐?‐caprolactone laminates. Specimens were manufactured using in situ polymerization of ?‐caprolactone around a bed of phosphate glass fibers. The latter were sized with 3‐aminopropyltriethoxysilane to control the rate of modulus degradation. Fiber content was the main variable in the study, and it was found that the moisture diffusion coefficient increased significantly with increasing fiber volume fraction. Diffusion, plasticization, and leaching of constituents appear to be the dominant aspects of the process over these short‐term tests. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

一种中温C/C复合材料抗氧化涂层的制备及其性能

制备了一种工作温度约1 173 K的C/C复合材料抗氧化复合涂层,它由磷酸盐过渡层和陶瓷相阻挡层构成,通过与单一陶瓷相涂层的对比试验研究了它的抗氧化机理。涂覆有该复合涂层的C/C复合材料试样,在空气中1 173 K时氧化10 h的失重率为11.25％,氧化失重率为9.84×10~(-5)g/(cm~2·min),而且其氧化失重率随氧化时间延长而降低;4 h内经过30次从1 173 K至室温急冷急热循环后,失重率为6.38％,涂层基本完好,说明涂层在温度不超过1 173 K时具有良好的抗氧化性和抗热震性。该种涂层适合于中温下C/C复合材料的抗氧化保护。     

Techniques and Apparatus for Measuring Rotational Core Losses of Soft Magnetic Materials

In many situations such as the cores of a rotating electrical machine and the T joints of a multiphase transformer, the local flux density varies with time in terms of both magnitude and direction, i.e. the flux density vector is rotating. Therefore, the magnetic properties of the core materials under the rotating flux density vector excitation should be properly measured, modeled and applied in the design and analysis of these electromagnetic devices. This paper presents an extensive review on the development of techniques and apparatus for measuring the rotational core losses of soft magnetic materials based on the experiences of various researchers in the last hundred years.     

综合线损分析系统研究

描述了综合线损分析系统应该具有的主要功能和分析内容，介绍了系统实现中应该注意的几个问题、系统内容和实现方法。     

小议变动成本法的合理性

企业对盈亏临界点的计算通常是以变动成本法为基础，但也有以制造成本法为计算基础的，对于这两种成本方法计算的几种盈亏临界点的情况，本文结合案例，通过比较分析认为：盈亏临界点的计算应当以变动成本法为基础更为合理。