Small sample improvements in the threshold cointegration test using residual-based moving block bootstrap

A residual-based moving block bootstrap procedure for testing the null hypothesis of linear cointegration versus cointegration with threshold effects is proposed. When the regressors and errors of the models are serially and contemporaneously correlated, our test compares favourably with the Sup LM test proposed by Gonzalo and Pitarakis. Indeed, shortcomings of the former motivated the development of our test. The small sample performance of the bootstrap test is investigated by Monte Carlo simulations, and the results show that the test performs better than the Sup LM test.     

Precise identification of moving vehicular parameters based on improved glowworm swarm optimization algorithm

This paper proposes an indirect method for the identification of moving vehicular parameters using the dynamic responses of the vehicle. The moving vehicle is modelled as 2-DOF system with 5 parameters and 4-DOF system with 12 parameters, respectively. Finite element method is used to establish the equation of the coupled bridge–vehicle system. The dynamic responses of the system are calculated by Newmark direct integration method. The parameter identification problem is transformed into an optimization problem by minimizing errors between the calculated dynamic responses of the moving vehicle and those of the simulated measured responses. Glowworm swarm optimization algorithm (GSO) is used to solve the objective function of the optimization problem. A local search method is introduced into the movement phase of GSO to enhance the accuracy and convergence rate of the algorithm. Several test cases are carried out to verify the efficiency of the proposed method and the results show that the vehicular parameters can be identified precisely with the present method and it is not sensitive to artificial measurement noise.     

Synthesis and characterisation of alumina pillared Texas montmorillonite and determination of the effective Keggin ion charge

Controlled calcination of Texas montmorillonite has allowed production of a range of materials of cation exchange capacity from 70 mequiv./100 g dry clay to virtually zero. Pillaring of these with Chlorhydrol precursor solution has then provided a family of materials of pillar density ranging from about one per six unit cells to zero. The analytical technique based on isomorphous metal dilution (IMD) that follows pillaring is validated. The results provide a consistent value for the precursor (Keggin) ion charge, in the conditions normally used, of 3.15±0.10 rather than the formal value of 7. An approach to the attainment of pillar densities consistent with the introduction of shape/size selectivity on pillared layered materials is outlined.     

静态随机存储器单粒子翻转效应的二维数值模拟

采用MEDICI二维模拟软件对静态存储器SRAM的单粒子翻转(SEU)现象进行了计算。对MOSFET漏区模拟得到的结果与电荷漏斗模型相吻合,表明所建立的物理模型的正确性。通过输入不同粒子的线性能量传输LET值,得到了某一结构器件的收集电荷与LET值的关系曲线,并给出临界电荷7 73×10-14C。     

压缩空气干燥器的选型比较

对现行的几种类型的压缩空气干燥器的性能、优缺点及技术指标进行比较，提出用户在选择干燥器时应根据工艺要求合理经济地选择干燥器，以最大可能地节约购买费用和使用费用。     

衍射图像的信号采集和数据处理

针对衍射图像边缘弥散状态不易切准的问题，运用光电积分的方法确定采集点，然后将二值化的数据通过计算机采用最小二乘法进行计算，从而保证了测量结果的正确性     

网络服务器软件老化现象的测试与分析

提出了一种测试软件老化过程的实验方案，编制了实现该方案的软件工具集，并以应用广泛的Apache网络服务器为目标，研究了当负载为泊松流时服务器的老化现象，用回归分析和ARIMA(自回归差分滑动平均)模型分析了剩余内存的变化情况。结果表明ARIMA模型可以较好地描述和预测内存的使用情况。     

相依随机序列滑动平均的若干极限定理

基于服从指数分布的独立随机变量序列,构造带参数的滑动似然比,给出任意随机序列的用不等式表示的强极限定理,即小偏差定理。所得结果推广了已有结论。     

一种带有泵升电容的新型高增益升压直流变换器

为了满足分布式发电系统中必须把太阳能、燃料电池和蓄电池输入的低压直流转换为高压的要求,在传统型升压直流变换器的基础上,提出了一种基于双电感和泵升电容的新型拓扑结构。该拓扑结构利用电感和电容的并联充电、串联放电特性,较好地实现了低占空比条件下高电压增益的目标。最后,分析了该拓扑结构在3种不同电感条件下的工作原理,并通过仿真验证了上述理论分析的正确性。     

High-speed ground moving target detection research using triangular modulation FMCW

The frequency modulated continuous wave (FMCW) radar has the characteristics of low probability of interception, good hidden property and the ability to counter anti-radiation missiles. This paper proposes a new method for high-speed ground moving target detection (GMTD) using triangular modulation FMCW. According to the characteristic of the opposite range shift induced by the upslope and downslope modulation FMCW, the upslope and downslope are imaged, respectively. After compensation of continuous motion of the platform and time difference between upslope and downslope signals for imaging, the moving target can be detected through displaced phase center antenna (DPCA) technology. When the moving target is detected, the moving target image is extracted, and correlation processing is used to obtain the range shift, which can be used to estimate the target radial velocity, and further to find the real position of the target. The effectiveness of this method is verified by the result of computer simulation. __________ Translated from Journal of Xidian University, 2008, 35(4): 586–591 [译自: 西安电子科技大学学报(自然科学版)]