模糊综合评价方法在桥型多方案选择中的应用

为了解决现阶段桥型多方案选择中过多依赖设计者经验,而不可避免的带来主观性与片面性的问题.针对桥型方案选择的多因素与模糊性特征,提出了模糊综合评价方法在桥型多方案选择中的应用,确定了影响桥梁选型的指标体系,介绍了该方法的应用模型与步骤,并结合实例详细介绍了这种方法的应用过程.结果验证了这一方法的简明性和实用性.有利于减少桥梁型式选择的失误,提高其客观性与合理性,以得出最佳方案.     

改性纤维素增强丙烯酰胺水凝胶的合成与拉伸性能研究

采用水媒法制备了低取代度羧甲基纤维素,并用接枝聚合法制备了改性纤维素/丙烯酰胺水凝胶,考察了单体质量比、取代度等对水凝胶拉伸性能的影响.结果表明:对于接枝聚合反应,采用低取代度羧甲基纤维素可以提高纤维素的有效用量;当交联剂用量为180 mg/L、引发剂1 300 mg/L、低取代度羧甲基纤维素和丙烯酰胺质量比在1∶4 ～ 1∶4.5之间、单体质量分数为30%时,合成水凝胶的拉伸强度达到0.28 MPa;在此基础上,适量添加15%的淀粉可使水凝胶拉伸强度达到0.47 MPa;添加1%二氧化钛可使水凝胶拉伸强度达到0.38 MPa.     

水电站月度调度函数的模型制定与模拟结果评价

基于统计学中多元逐步回归原理建立了多年调节水电站分月调度函数模型,并根据水电站优化调度特征确定待选自变量,用以指导电站实际优化调度运行。在考虑电站自身各约束及综合利用要求的前提下,进一步采用程序设计模拟调度函数指导水电站长系列调度运行,通过对模拟结果的全面评价,证实所建立的调度函数具有良好的指导意义和实用价值。     

洗碗机用液体洗涤剂的研制

研究了二元表面活性剂混合体系的泡沫、表面张力、cmc及浊点等性能，并据此进行了复合配方试验，添加自制复合钙皂分散剂和其他助剂，研制出了一种去污力高、起泡力低并适用于家用洗碗机循环喷洗用的液体洗涤剂。该剂为碱性水基清洗剂，不含强酸、强碱和磷助剂等成分，可用于中温（30℃－40℃）洗涤，能有效去除碗与碟等餐具硬表面的油污，对人、畜无毒，洗涤排水合格。     

矿用产品金属外壳的电磁屏蔽效能分析

对采用单层不锈钢外壳的矿用产品的电磁屏蔽效能进行了分析与计算,得出产品金属外壳的电磁屏蔽效能与采用的金属材质、厚度以及因加工工艺形成的隙缝、开孔有关,为提高矿用产品的电磁屏蔽性能提供了工程经验。     

多路输出反激式开关电源的改进与实现

针对传统开关电源存在的控制芯片供电方式耗能较大、反馈电路光耦有效输入电流范围窄两个问题,对传统电源电路进行了改进,设计并实现了一款性能优良的48V转+5V、±15V,输出功率25W的三路输出反激式开关电源。样机输出电压精度为0.2%(+5V)、0.53%(+15V)、0.6%(-15V),输出电压纹波为20mV(+5V)、50mV(+15V)、60mV(-15V),电压精度和纹波率均满足小于1%的要求;测试表明:该电源性能优良,具有效率高,稳压精度高,负载调整率高等优点,有很高的生产应用价值。     

聚合度对纤维素表面性能的影响

根据Washburn浸渍理论和van Oss-Good-Chaudhury组合理论及应用柱状灯芯技术测试了具有不同聚合度(DP)的纤维素的表面性能,同时与已报道的纤维素的表面能进行了比较。结果表明:纤维素的表面能随分子量的增加而增大,但主要是其Lifshitz-van der Waals力在起主导作用。研究还发现纤维素的表面能γS与聚合度DP之间的关系大致可以描述为:γS=37.56+0.02 DP,而纤维素的极性率P与聚合度DP之间的关系则是一种非线性关系,如:P=11.88-0.02 DP+9.10 DP2。     

The design and analysis of unequal error protection fountain coding for multiple source networks over binary erasure channels

A novel network model of multiple source fountain coding is developed and a novel class of generic multiple source fountain codes with unequal error protection(UEP)property is proposed.The And–Or tree analysis technique is generalized to analyze the asymptotic performance of the proposed codes and a joint optimization method employing both linear and nonlinear programs is developed to optimize the degree distributions.Furthermore,we propose three basic methods to achieve UEP property and the performance of each method is discussed.We employ these analytical results and optimization method to design and discuss several UEP codes with two and four sources for different application scenarios.Simulation results verify that the proposed codes can be applied to the networks with any number of sources and can provide strong UEP property in various ways based on the proposed three basic methods.     

A novel initial ranging algorithm for OFDMA systems using smart antenna

To improve the capacity of initial ranging （IR） users simultaneously accessing into network and enhance the performance of the IR, a novel IR algorithm is presented for the orthogonal frequency division multiple access systems with the smart antenna. The beamforming weight vectors provided by the antenna array are introduced for the IR users, and the procedures of the multiuser parameter estimation and the interference cancellation are designed. The proposed method can improve the accuracy of the channel estimation of active paths and efficiently reduce the residual multiple access interference. Simulation results show that the proposed method has a much better performance than the available successive multiuser detection and interference cancellation algorithm and accommodates more active ranging users simultaneously accessing into a cell.     

Loss of Curing Agent During Thin Film (Droplet) Curing of Thermoset Material

Recently, it has been reported by our group and others^1.2 that loss of curing agent is encountered during the curing of small droplets or thin films of amine cured epoxies. In our earlier study³ results were reported on loss of curing agent in small droplets used in conducting the rnicrobond, single fiber test for determination of interfacial shear strength (ISS). It was reported that use of a volatile curing agent (meta-phenylene diamine (m-PDA) with DGEBA resin) resulted in increasing amounts of curing agent being lost (as measured by T₈ of the cured droplets) with decreasing droplet size during the processing procedure. Droplets smaller than 150 micrometers were seen to lose up to 40% of the curing agent leading to alteration of the mechanical properties of the droplet and, therefore, causing measured values of ISS to be exceedingly low. Use of a less volatile curing agent (Jeffamine 700, a polyether diamine, Texaco Specialty Chemicals) in combination with DGEBA resin produced results which indicated that loss of curing agent was not occuring. This study was undertaken to show the relationships between film (or droplet) size and the amount of curing agent lost (during the processing) for three different aminecured epoxy systems.