Detection of multiple cracks using frequency measurements

A method for detection of multiple open cracks in a slender Euler-Bernoulli beams is presented based on frequency measurements. The method is based on the approach given by Hu and Liang [J. Franklin Inst. 330 (5) (1993) 841], transverse vibration modelling through transfer matrix method and representation of a crack by rotational spring. The beam is virtually divided into a number of segments, which can be decided by the analyst, and each of them is considered to be associated with a damage parameter. The procedure gives a linear relationship explicitly between the changes in natural frequencies of the beam and the damage parameters. These parameters are determined from the knowledge of changes in the natural frequencies. After obtaining them, each is treated in turn to exactly pinpoint the crack location in the segment and determine its size. The forward, or natural frequency determination, problems are examined in the passing. The method is approximate, but it can handle segmented beams, any boundary conditions, intermediate spring or rigid supports, etc. It eliminates the need for any symbolic computation which is envisaged by Hu and Liang [J. Franklin Inst. 330 (5) (1993) 841] to obtain mode shapes of the corresponding uncracked beams. The proposed method gives a clear insight into the whole analysis. Case studies (numerical) are presented to demonstrate the method effectiveness for two simultaneous cracks of size 10% and more of section depth. The differences between the actual and predicted crack locations and sizes are less than 10% and 15% respectively. The numbers of segments into which the beam is virtually divided limits the maximum number of cracks that can be handled. The difference in the forward problem is less than 5%.     

Vibrations of stretched damped beams under non-ideal boundary conditions

A simply supported damped Euler-Bernoulli beam with immovable end conditions are considered. The concept of non-ideal boundary conditions is applied to the beam problem. In accordance, the boundaries are assumed to allow small deflections and moments. Approximate analytical solution of the problem is found using the method of multiple scales, a perturbation technique.     

空爆毁伤地面机动目标扫描准则研究

文中主要针对多爆炸成型弹丸空爆战斗部,在分析区域识别和占空比识别两种不同扫描准则的基础上,应用蒙特卡洛方法计算了战斗部对目标的毁伤概率.通过仿真计算结果对比分析,获得了不同扫描准则对毁伤概率的影响,结果可为多爆炸成型弹丸空爆战斗部设计和选择使用扫描准则提供参考依据.     

带有块间串扰MC-CDMA的时域信道估计和多用户检测

本文把带有IBI的MC-CDMA系统等效解释为特殊的直接序列码分多址（DS-CDMA）系统，并给出了相应的时域信道估计方法和时域线性最小均方误差（MMSE）多用户检测方法。仿真实验表明了本文方法的性能。     

震源延迟叠加技术及应用效果

延迟叠加爆炸是针对高分辨率和深层地震勘探而提出来的一种激发方式。这种激发方式能在保证地震分辨率的前提下有效提高地震波能量 ,在地震波的入射角范围内 ,有效克服非球形炸药激发引起的地震波传播的方向性。应用弹性波动力学对多级延迟爆炸进行理论研究 ,结合实际试验资料 ,研究了延迟爆炸情况下激发参数对地震波能量、主频、频宽等的影响。从几何地震学出发 ,分析了不同时间激发的地震波在地下空间中的干涉情况 ,对其能量传播的方向性进行了研究。理论分析和试验效果表明 ,延迟叠加震源与相同药量的普通震源相比 ,激发地震波的主频高 ,频带宽 ,增强了下传能量 ,降低了次生干扰 ,在高分辨率和深层地震勘探中具有明显的优势。     

长庆油田陕北区原油破乳剂的筛选和复配

实验考察了8种市售水溶性破乳荆对长庆油田陕北区有代表性的宝塔区、安塞和子长原油(均为低硫中间基-石蜡基原油)的脱水效果(加量100mg／L，脱水温度55℃，时间3h)。目前长庆采油一厂使用的YT-100和延炼集团使用的GT-940对这3种原油的脱水效果均较好，但对子长原油的脱水率不高，分别为69．7％和58．9％。在由所选性能较好的破乳刺组成的4种二元复配物中，GT-940 HQ96-1对3种原油的脱水效果均高于单剂，最佳配比分别为4：1，4：1，3：2；其余3种复配物则对原油有选择性，其中GT-940 YT-100相近(97．5％)；YT-100 HQ96-1仅能改善子长原油的脱水效果，配比为4：1时脱水率最高(76．4％)；SP-169 HQ96-1仅能改善宝塔区原油的脱水效果．配比3：2和2：3时脱水率最高(92．9％)。表5参6。     

Multiplicative Operator Splittings in Nonlinear Diffusion: From Spatial Splitting to Multiple Timesteps

Operator splitting is a powerful concept used in many diversed fields of applied mathematics for the design of effective numerical schemes. Following the success of the additive operator splitting (AOS) in performing an efficient nonlinear diffusion filtering on digital images, we analyze the possibility of using multiplicative operator splittings to process images from different perspectives.We start by examining the potential of using fractional step methods to design a multiplicative operator splitting as an alternative to AOS schemes. By means of a Strang splitting, we attempt to use numerical schemes that are known to be more accurate in linear diffusion processes and apply them on images. Initially we implement the Crank-Nicolson and DuFort-Frankel schemes to diffuse noisy signals in one dimension and devise a simple extrapolation that enables the Crank-Nicolson to be used with high accuracy on these signals. We then combine the Crank-Nicolson in 1D with various multiplicative operator splittings to process images. Based on these ideas we obtain some interesting results. However, from the practical standpoint, due to the computational expenses associated with these schemes and the questionable benefits in applying them to perform nonlinear diffusion filtering when using long timesteps, we conclude that AOS schemes are simple and efficient compared to these alternatives.We then examine the potential utility of using multiple timestep methods combined with AOS schemes, as means to expedite the diffusion process. These methods were developed for molecular dynamics applications and are used efficiently in biomolecular simulations. The idea is to split the forces exerted on atoms into different classes according to their behavior in time, and assign longer timesteps to nonlocal, slowly-varying forces such as the Coulomb and van der Waals interactions, whereas the local forces like bond and angle are treated with smaller timesteps. Multiple timestep integrators can be derived from the Trotter factorization, a decomposition that bears a strong resemblance to a Strang splitting. Both formulations decompose the time propagator into trilateral products to construct multiplicative operator splittings which are second order in time, with the possibility of extending the factorization to higher order expansions. While a Strang splitting is a decomposition across spatial dimensions, where each dimension is subsequently treated with a fractional step, the multiple timestep method is a decomposition across scales. Thus, multiple timestep methods are a realization of the multiplicative operator splitting idea. For certain nonlinear diffusion coefficients with favorable properties, we show that a simple multiple timestep method can improve the diffusion process.     

基于LabWindows/CVI的多线程测控软件设计技术

多线程技术是W in32操作系统的一项重要软件技术。CVI 6.0及其以后版本提供了线程池和异步定时器两种多线程运行机制,为测控软件的设计开发带来了一次技术飞跃。文中结合测控软件设计实例,详细介绍了在CVI平台下多线程编程技术的应用方法。     

Determining the characteristics of systems with multiple inputs and multiple outputs

A simple and computationally efficient method of determining the transfer function and other characteristics of systems with multiple inputs and multiple outputs (MIMO systems) described by autoregression equations is proposed. The method is based on the use of the discrete Fourier transformation. The algorithm is highly suitable for computer implementation. The efficiency and simplicity of the method are illustrated using the example of a system with three inputs and three outputs. The proposed concept may be applied to systems described by the autoregression sliding mean.     

SYNTHESIS OF CHEMICAL REACTION PATHS: ECONOMIC AND SPECIFICATION CONSTRAINTS

The synthesis of alternative reaction paths leading to a desired chemical has received increasing attention in the recent past. A procedure to develop new reaction schemes in a systematic manner was reviewed by the authors ( [ 1 -3] ). The algorithm presented in these earlier papers implied the generation of an infinite number of reaction paths. The thermodynamic feasibility is a preliminary screening which reduces the number of chemical production schemes. Further screening is necessary, taking into account considerations which are related to economics, processing, safety and so on. Some constraints related with role specification, gross added value and demand/supply requirements are analysed in this paper. Examples illustrate the application of the screening procedure, showing that the addition of a few constraints results in a dramatic decrease of alternative reaction paths.