Modification of catalytic performances due to the co-feeding of hydrogen or carbon dioxide in the partial oxidation of methane over a NiO/γ-Al2O3 catalyst

The influence of the addition of 1–10 vol.% of hydrogen or carbon dioxide to the feed during the partial oxidation of methane was studied over a NiO/γ-Al₂O₃ catalyst. The addition of H₂ decreases the conversion and syngas selectivity. This decrease of performance seems to be related to a higher reduction of the catalyst due to the H₂ co-feeding. The addition of CO₂ also appears unfavorable to the production of hydrogen but increases the CO yield. A combination of the dry reforming and the reverse water gas shift reactions is suggested to explain the observed modifications in the product yields.     

含杂环甲胺基的氰基丙烯酸酯类光合作用抑制剂的合成和活性研究进展

氰基丙烯酸酯是一类PSII电子传递抑制剂,笔者发现在抑制剂分子疏水性基团苯环被吡啶替代能大大提高其抑制活性,对此先导结构进一步优化,设计合成以下系列新化合物:含2-氯(或烷氧基)-5-吡啶甲胺基的氰基丙烯酸酯、含2-氟-5-吡啶甲胺基的氰基丙烯酸酯、含2-氯-5-噻唑甲胺基的氰基丙烯酸酯、氮在吡啶环不同位置的吡啶甲胺基氰基丙烯酸酯、含烷硫基取代的吡啶甲胺基的氰基丙烯酸酯、含二茂铁甲胺基的氰基丙烯酸酯。生测结果表明:这些含杂环甲胺基的氰基丙烯酸酯类化合物对油菜等十字花科类杂草表现出很好的除草活性,且茎叶处理优于土壤处理。     

Synthesis, characterization and thermal properties of soluble aromatic poly(amide imide)s

Novel diamines such as N,N′-bis(aminoaryl)terephthalamido-2-carboxylic acids (BATCA), which contain primary amine, amide and carboxylic acid groups and are soluble in dilute aqueous NaOH solution, were synthesized by reacting aromatic diamines with trimellitic anhydride chloride in dimethylformamide. Poly(amide imide)s containing 3:1 ratio of amide:imide groups in the polymer chain were prepared by low temperature solution polymerization of BATCAs with isophthaloyl chloride or terephthaloyl chloride in dimethylformamide at 5-10 °C to form poly(amide amic acid)s, and followed by treating with a mixture of triethylamine and acetic anhydride. The PAIs were soluble in polar aprotic solvents like dimethylformamide, dimethylacetamide, dimethylsulphoxide and N-methylpyrrolidone, and have inherent viscosities in the range of 0.30-0.66 dL/g. The PAIs were characterized by IR, ¹H NMR and ¹³C NMR techniques. Thermogravimetric analysis (TGA) has shown that the initial decomposition temperatures of the polymers are in the range of 250-440 °C, depending upon the structures of diamine and diacid chloride. The glass transition temperatures of the PAIs are in the range of 128-320 °C. The IDT and T_g values of the polymers containing terephthaloyl unit are higher by about 20-40 °C than those of the polymers with isophthaloyl unit. BATCA could be utilized for the preparation of thin film composite membranes having PAA/PAI barrier layer on PES by in situ interfacial polymerization with IPC/TPC/TMC.     

直接金属氧化法制备SiCp/Al2O3-Al复合材料的显微结构及工艺因素的研究

在低成本的前提下 ,利用直接金属氧化法 (DIMOX)制备了SiC颗粒增强Al2 O3-Al基复合材料 ,并详细叙述了此种方法的工艺过程。借助于X—射线衍射 (XRD)和扫描电镜 (SEM)对该种复合材料的微观结构进行了观察 ,分析了SiO2 层、合金成分和温度制度对复合材料性能的影响。结果表明 ,此种复合材料结构致密且渗透完全 ,微观结构由三种相互穿插相组成 :SiC预制体、连续的Al2 O3基体 ,呈网状结构分布的未被氧化的残余Al。合金成分及烧成制度是此工艺过程中的最重要的工艺参数。     

Lewis acidity as an explanation for oxide promotion of metals: implications of its importance and limits for catalytic reactions

Sub-monolayer quantities of metal oxides are found to influence CO hydrogenation, CO₂ hydrogenation, acetone hydrogenation, ethylene hydroformylation, ethylene hydrogenation, and ethane hydrogenolysis over Rh foils. The metal oxides investigated include AlOx, TiOx, VOx, FeOx, ZrOx, NbOx, TaOx, and WOx. Only those reactions involving the hydrogenation of C-O bonds are enhanced by the oxide overlayers. The coverage at which maximum rate enhancement occurs is approximately 0.5 ML for each oxide promoter. Titanium, niobium, and tantalum oxides are the most effective promoters. XPS measurements after reaction show that of the oxides studied titanium, niobium, and tantalum oxide overlayers are stable in the highest oxidation states. The trend in promotion effectiveness is attributed to the direct relationship between oxidation state and Lewis acidity. For the oxide promoters, bonding at the metal oxide/metal interface between the O-end of adsorbed CO and the Lewis acidic oxide is postulated to facilitate C-O bond dissociation and subsequent hydrogenation.     

Surface chemistry and kinetics of the hydrolysis of isocyanic acid on anatase

In order to meet the stricter NO_x and particulate emission limits for commercial vehicles, the selective catalytic reduction (SCR) with urea is currently seen having the highest potential. The conversion of urea into ammonia and carbon dioxide consists of two consecutive reactions, in which isocyanic acid is an intermediate that is hydrolyzed over TiO₂. The intrinsic kinetics and the surface chemistry for this reaction are explored. Up to a temperature of 132 °C the reaction was in the intrinsic kinetic regime (E_A = 73 kJ/mol), while at higher temperatures the reaction was limited by pore and external diffusion constraints, respectively. In the presence of NO, NH₃ and NO₂, the catalytic activity was negatively influenced, increasing in severity in the sequence mentioned indicating that nitrates formed from NO₂ were most effective in blocking cations and anions of TiO₂. IR spectroscopy indicates that dissociative adsorption of HNCO on TiO₂ forms Ti–NCO and hydrogen bonded OH species. In the presence of water, isocyanic acid was so rapidly hydrolyzed that only adsorbed ammonia was observed on the catalyst surface. The presence of NO, NH₃ and NO₂ retards hydrolysis leading to the appearance of isocyanate species on the surface.     

Theoretical and experimental study on the emission characteristics of waste plastics incineration by modified O2/RFG combustion technology

For mitigating the emission of greenhouse gas CO₂ from general air combustion systems, a clean combustion technology O₂/RFG is in development. The O₂/RFG combustion technology can significantly enhance the CO₂ concentration in the flue gas; however, using almost pure oxygen or pure CO₂ as feed gas is uneconomic and impractical. As a result, this study proposes a modified O₂/RFG combustion technology in which the minimum pure oxygen is mixed with the recycled flue gas and air to serve as the feed gas. The effects of different feed gas compositions and ratios of recycled flue gas on the emission characteristics of CO₂, CO and NO_x during the plastics incineration are investigated by theoretical and experimental approaches.Theoretical calculations were carried out by a thermodynamic equilibrium program and the results indicated that the emissions of CO₂ were increased with the O₂ concentrations in the feed gas and the ratios of recycled flue gas increased. Experimental results did not have the same trends with theoretical calculations. The best feed gas composition of the modified O₂/RFG combustion was 40% O₂ + 60% N₂ and the best ratio of recycled flue gas was 15%. As the O₂ concentration in feed gas and the ratio of recycled flue gas increased, the total flow rates and pressures of feed gas reduced. The mixing of solid waste and feed gas was incomplete and the formation of CO₂ decreased. Moreover, the emission of CO was decreased as the O₂ concentration in feed gas and the ratio of recycled flue gas increased. The emission of NO_x gradually increased with rising the ratio of recycled flue gas at lower O₂ concentration (<40%) but decreased at higher O₂ concentration (>60%).     

A voltammetric study concerning the structural stability of Li-overstoichiometric Mg-doped LiCoO2 powders

The effect of Mg-doping and Li overstoichiometry on the structural stability of LiCoO₂ powders has been investigated with emphasis to voltammetric properties. Microparticle cyclic voltammetry (CV) conducted in caustic NaOH to best simulate a non-aqueous electrolyte shows a marked improvement of the structure stability of doped LiCoO₂. In contrast to the unsubstituted LiCoO₂ sample which shows voltammetric peaks associated to the well-known two-phase domain and monoclinic distortion reactions, in Li_1.08Mg_0.06CoO₂, LiMg_0.06CoO₂ and Li_1.08CoO₂ samples these peaks are strongly suppressed providing direct evidence for the existence of a stable solid solution with negligible phase transitions in the reversible intercalation region (3.8-4.2 V vs. Li) as well as in the overcharged region. The effect is higher with Mg-doping, irrespective of the Li overstoichiometry. However, the concomitant presence of Mg and Li excess in the structure is important for obtaining small particle sizes. Since Mg-doping induces a quasi metallic behavior in the samples, whereas the Li excess may provide an higher initial capacity, it is suggested that the Li_1.08Mg_0.06CoO₂ composition may be of interest as positive cathode for advanced Li-ion batteries.     

Poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)– poly(dimethylsiloxane) block copolymers

The hydrolytic condensation of 1,3‐dichloro‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane under neutral conditions produced α'ω‐dihydroxy‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane (polymerization degree ≈ 4). The homofunctional condensation of α'ω‐dihydroxy‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane in a toluene solution and in the presence of activated carbon was performed, and dihydroxy‐containing oligomers with various degrees of condensation were obtained. Through the heterofunctional condensation of dihydroxy‐containing oligomers with α'ω‐dichlorodimethylsiloxanes in the presence of amines, corresponding block copolymers were obtained. Gel permeation chromatography, differential scanning calorimetry, thermomechanical analysis, thermogravimetry, and wide‐angle roentgenography investigations were carried out. Differential scanning calorimetry and roentgenography studies of the block copolymers showed that their properties were determined by the ratio of the lengths of the flexible and linear poly(dimethylsiloxane) and rigid poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane) fragments in the macromolecular chain. At definite values of the lengths of the flexible and rigid fragments, a microheterogeneous structure was observed in the synthesized block copolymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1409–1417, 2002; DOI 10.1002/app.10335