A comparative study of short nylon fiber—Natural rubber composites prepared from dry rubber and latex masterbatch

A novel method for the preparation of short nylon fiber–natural rubber composites was developed in which short fibers chopped to approximately 6 mm were incorporated in the latex stage and processed into sheet form. By this method, mixing cycle time was reduced without compromising the fiber dispersion. Fiber breakage during mixing was reduced. The new composites when compounded with a dry bonding system based on hexamethylenetetramine, resorcinol and hydrated silica (HRH) showed improved modulus, tensile strength and abrasion resistance compared to conventional composites. Tear strength, resilience, and compression set were similar to the conventional composites. SEM analysis indicated better interaction between matrix and fibers in the case of latex master batch. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Studies on jute–asphalt composites

The tensile properties of jute make it a suitable raw material for asphalt overlay (A/O) fabric. In this study, the thermal stability of jute under conditions of asphalt overlaying process was investigated and the compatibility of jute with asphalt was assessed through experimentation on jute–asphalt composites under mechanical and hygral loads. Fourier transform infra red (FTIR) spectroscopic study revealed probable chemical bonding between jute and asphalt. The test for ascertaining the capability of asphalt encasement for protecting jute against biodegradation under enzymatic attack was found positive. A 6‐month hygral treatment, of the jute–asphalt composite, showed significant increase in modulus of the material. The results indicate that although the strength of jute deteriorates by about 10% under asphalt overlaying condition, the overall tensile behavior of jute fabric–asphalt composite material is considerably superior to that of the pure jute fabric, even under biological and extended hygral loading conditions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Failures of retrieval and comparison constrain change detection in natural scenes.

In a change detection paradigm, a target object in a natural scene either rotated in depth, was replaced by another object token, or remained the same. Change detection performance was reliably higher when a target postcue allowed participants to restrict retrieval and comparison processes to the target object (Experiment 1). Change detection performance remained excellent when the target object was not attended at change (Experiment 2) and when a concurrent verbal working memory load minimized the possibility of verbal encoding. (Experiment 3). Together, these data demonstrate that visual representations accumulate in memory from attended objects as the eyes and attention are oriented within a scene and that change blindness derives, at least in part, from retrieval and comparison failure. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

厦门市气源转换的技术分析

分析了气源转换时原有输配系统的管道、调压设备、计量设备、用气设备与天然气系统相适应的问题，提出了相应的措施。     

Production of phosphoric acid with low content of impurities

The present work is to study the possibility for controlled distribution of the impurities when they are decomposed by sulphuric acid to wet phosphoric acid and phosphogypsum, as well as generating technological conditions for production of clean wet phosphoric acid and its derivatives - phosphoric fertilizers, food phosphates and other phosphoric products.A coefficient of distribution D_A is introduced as a general criterion for elements dispersion. The study includes relationships between the weight ratio sulphuric acid/natural phosphate and D_A; the period of decomposition and D_A; the particle's size content of the natural phosphate and D_A. The obtained experimental data and relationships about the influence of the above discussed technological parameters on dispersion of more than 23 elements allow for control of that process in wet phosphoric acid and phosphogypsum by selecting specific technological conditions. Thus, depending on the requirements of acid's consumers and procedures for secondary processing of phosphogypsum to end-products, a selective decomposition of the natural phosphates to phosphoric acid and phosphogypsum can be carried out with content of the impurities in those products varying in narrow limits.     

中国第一口超千米深水钻井液技术

LW3-1-1探井位于中国南海珠江口盆地，作业水深1480m，完钻井深为3843m，地层以大套灰色泥岩和页岩为主，具有强水敏性．要求钻井液具有良好的流变性、润滑性、抑制性，良好的抗盐、抗钙、抗高温和抗低温能力，以及强的天然气水合物抑制能力。该井采用了PFMX钻井液体系，钻井周期为49d，介绍了钻井液工艺及现场应用情况。PFMX体系表现出很多油基钻井液的优点，如好的润滑性、高的钻进速率、膜效应、强的井眼稳定及页岩抑制性，解决了强水敏性地层的井壁稳定等问题，还解决了深水钻井中遇到的挑战，如低的破裂压力梯度、天然气永合物、浅层水流、深水低温等问题，满足了该区块作业需要。     

管线用高强韧性宽厚钢板的开发

本文回顾了舞钢高强韧性管线用宽厚钢板的研制开发过程，并结合生产工艺，对钢板性能作了全面分析，指导了钢管线钢的生产。舞钢X70级管线钢有较高的断裂韧性、良好的可焊性以及抗SSCC、HIC性能。舞钢正在进行技术改造，以进一步改善组织，提高性能、满足西气东输要求。     

裂纹梁动态响应有限元分析中的线弹簧模型

本文提出了一种以线弹簧模型为基础来分析裂纹梁动态响应的新数值方法．应用能量原理和断裂力学理论首次建立了线弹簧模型的刚度矩阵，从而确立了一种能使二维裂纹问题转化为一维分析的梁的有限元模型．使用这个模型，研究了不同裂纹长度和裂纹位置对悬臂梁固有频率和振型的影响，并把计算所得到的数值结果与现有的实验数据作了比较．结果表明，当无量纲裂纹长度小于０．６时，两者吻合得非常好；反之，两者之间存在较大的误差．对这种误差产生的原因，本文也作了解释．     

GTL 工艺技术评述

介绍了1990年以来GTL工艺技术开发的进展情况，其中以Sasol-SSPD和Syntruleum两种工艺最受关注，从现有数据分析。Syntruleum虽采用含氮合成气生产工艺，但并未使装置的单位投资明显改善，因此，近10年来GTL工艺技术开发虽取得了长足的进步，但其装置投资仍偏高，从而又严重影响了产品成本，按南非Sasol公司的经验。开展资源综合利用是降低液体燃料生产成本的有效途径，目前国外GTL工艺技术的开发仍很活跃，我国也已形成大量实验室成果。建议尽快组织力量完成工业性试验。