加强环滚弯成形工艺及锻模设计

通过对加强环零件的分析 ,确定了合理的加工原材料规格、成形工艺方案和锻模结构 ,解决了原生产过程中存在的材料浪费、加工困难等问题 ,提高了经济效益。     

ANALYSIS OF DISSIPATIVE STRUCTURE IN MATERIAL COMMINUTION

ＡＮＡＬＹＳＩＳＯＦＤＩＳＳＩＰＡＴＩＶＥＳＴＲＵＣＴＵＲＥＩＮＭＡＴＥＲＩＡＬ　ＣＯＭＭＩＮＵＴＩＯＮＺｈａｎｇ；Ｚｈｉｔｉｅ（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｃｈａｎｉｃａｌＥｎｇｉｎｅｅｒｉｎｇ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏｆＴｅ...     

Corrosion resistance of austenitic stainless steel separator for molten carbonate fuel cell

STS310S and SC-STS310S (simultaneously co-deposited chromium and aluminum onto 310S austenitic stainless steel substrate by pack-cementation process) were used as separator materials on the cathode side of a molten carbonate fuel cell. With the STS310S, corrosion proceeded via three steps; a formation step of unstable corrosion product, a protection step against corrosion until breakaway, and an advance step of corrosion after breakaway. The final corrosion product was LiFeO₂ and the loss of mass was 6.5 mg/cm² after a corrosion test of 480 hr at 650°C. The SC-STS310S showed more effective corrosion resistance, however, than did common STS310S. There was especially no corrosion loss on the SC-STS310S after the 480 hr corrosion test. It is anticipated that it will be very useful as an alternative separator on the cathode side off the MCFC in the future.     

Epsilon-near-zero or mu-near-zero materials composed of dielectric photonic crystals

We theoretically demonstrate that at certain frequencies two-dimensional dielectric photonic crystals （PCs） may be regarded as either epsilon-near-zero or mu-near-zero materials. We show that the transmission through a slab of such materials upon normal incidence is normally non-unity and decays with slab thickness. However, when the incident angle increases slightly, the transmittance experiences a dramatic increase due to the Brewster effect. The combination of the tunneling and resonance effects makes such materials good candidates for almost perfect bending waveguides and cloaking in waveguides. The zero index also enables applications of focusing and directive emission. At last, the distinction between the single-zero and double-zero media is discussed. In all of the above results, the numerical simulations perfectly match with theoretical predictions from the effective medium analysis.     

An atomistic-continuum inhomogeneous material model for the elastic bending of metal nanocantilevers

The equivalent elastic modulus of nanocantilever can be obtained using atomistic simulation. However, the use of this modulus to predict the bending of nanocantilever results in significant error compared with direct atomistic simulation. The error originates from the surface effect. In our current work, the nanocantilever is considered as an inhomogeneous continuum material. The distributions of materials parameters at the cross-section, such as atomistic elastic constants, are calculated from atomistic simulations. These atomistic-information-based materials parameters are used as inputs to continuum model. A numerical example case validates the presented model and methodology. To correctly predict the structure-property relations of elemental nano-structures are very important for the design of nano-devices. Our continuum model includes nano-effects and provides another way to study nanomechanics.     

碱性蓄电池隔膜用非织造布探析

介绍了碱性蓄电池隔膜用非织造布在电池生产中的作用和要求,对碱性蓄电池隔膜用非织造布的纤维原料、生产方法进行了比较分析。     

略谈平面设计中的触觉体验

本文通过对触觉设计这一设计理念的论述,探讨材质在平面设计中的表现以及如何在平面设计中合理的运用触觉感受来传达信息,提高设计品质。     

OMT在企业物流分析中的应用

文章介绍了面向对象的模型化技术（ＯＭＴ）的基本概念,分析了它的实现过程,即对象模型、动态模型、和过程模型的建立,并以一个具体的实例说明其在企业物流分析中的应用。     

Physiological and psychophysical responses in handling maximum acceptable weights under different footwear--floor friction conditions

A study on combined manual materials-handling tasks performed on floors under three friction levels was conducted. Eight male subjects participated in the study. The maximum acceptable weight of handling, including lifting, carrying for 3m, lowering, and walking 3m back at twice per minute was determined. The subject then performed the same tasks for 10 min. Heart rate, Vo2, energy efficiency, perceived sense of slip, and rating of perceived exertion for whole body strain were measured. The results showed that the effects of friction level on the maximum acceptable weights of handling, perceived sense of slip, Vo2, and energy efficiency were statistically significant (p相似文献   

一个农户生态经济系统的分析

对沈阳市桃仙镇荒山子村一个农户生态经济系统进行分析,结果表明：该农户正处于从传统农业向现代农业的过渡阶段,经济效益较好,整体技术水平和生态效益低,后两了该农户的进一步发展,以目前的生产水平,应采取户与户联合,取得规模效益,以当前农业产业化的发展。