惯性导航装置虚拟检测仪设计

惯性导航装置是一种很重要且精密的设备,故障检测和诊断是设备维修的前提,综合采用现在的虚拟检测技术,对惯性导航装置的故障检测方法进行了研究,设计了虚拟检测仪的硬件设备,开发了虚拟检测仪的软件,完成了整个虚拟检测仪的设计。     

避雷器接地电阻的测量与预测方法

介绍了避雷器三极法测量接地电阻的接线、测量原理及测量电压的选取,根据测得的历史数据建立了基于回归分析的接地电阻变化趋势预测模型,并通过标准离差检验证明了该预测模型可用于实际接地电阻的预测。实践表明,该测量与预测方法切实可行,能在一定程度上避免因接地电阻超标而引发的雷击事故。     

一种新的无线电高度表原位检测的高度模拟方法

针对目前对高度表进行原位检测的需求,设计了一种新的高度模拟方法;该方法的实现以ARM为核心,通过高度模拟电路产生各种需要的高度电压信号,从而达到高度模拟的目的,并且无需对机载高度表进行拆装,操作简单、快捷、可靠性较高;实验结果表明,这种方法的高度模拟精度较高,具有一定的实用价值和经济效益.     

The volume integral method of eddy-current modeling: Verification

The volume integral method of eddy-current modeling represents a flaw in metal as a set of electric dipoles located within volume elements or cells defining the flaw volume. Given this dipole distribution, impedance changes may be computed. The electric field of the dipole distribution is determined by an integral equation relating, by means of the electric field Green's tensor, the electric field due to the source to the total electric field in the flaw. The integral equation is solved by assuming that the total electric field is constant in each volume element, resulting in a matrix equation. The method has been programmed for use on a microcomputer. The method and computer program are verified using the analytical solution for a small spherical flaw and three sets of measured impedance data, measured by air-core coils along profiles overlying both surface-breaking and buried simulated flaws of known dimensions. Operating frequencies ranged between 900 and 4000 Hz. Generally agreement is good at lower frequencies ( 1000 Hz). At higher frequencies ( 4000 Hz), the agreement is not as good. This is thought to be due to the inability of the constant electric field approximation to model the steep electric field gradients present in the host metal at high frequency. The results are also sensitive to the method of computation of the electric field due to the source. Some improvements can and should be made to the method.     

Rapid software integration using structured methods

In this paper we discuss an approach to organizing the integration of 110,000 lines of C, SQL, Assembler, and microcode distributed over a network of 36 processors of four types so that it could be accomplished in six months. The software runs on a test system architecture consisting of a LAN-based workstation group and a set of VME-based embedded processors. By using structured methodology, parallelism in the integration process was achieved. The necessary stub tools were identified and developed before integration began. The principles followed and experiences of integrating the system are discussed.     

软件单元测试应用研究及案例分析

单元测试是软件测试过程的第一站,高质量的单元测试是软件质量保证的必要条件,本文就单元测试的概念、测试类型及规程作了简单的阐述,同时就单元测试进行了案例分析。     

非线性滤波在射线图像降噪增强中的应用

射线数字成像是当前射线检测与诊断技术发展的方向，图像降噪增强是提高射线成像检测灵敏度和分辨力的关键。重点探讨以排序滤波为代表的非线性滤波图像降噪增强方法，对射线图像的处理表明，线性滤波在降噪的同时会引起较大的边级模糊，而排序滤波不仅降低噪声且能保持图像细节，提高图像质量效果明显。     

百菌清及其三氟衍生物对番茄早疫病菌的室内抑菌活性比较

采用生长速率法测定了不同浓度的百菌清及其三氟衍生物对番茄早疫病菌Alternaria solani(Ell,et Mart.)Jones es Gmut的室内杀菌毒力。试验结果表明，百菌清及其三氟衍生物的ED50值分别为6089．89mg／L和156．43mg/L。，前者是后者的38．93倍。百菌清三氟衍生物的毒力明显高于百菌清。     

大面积水域浓度场测试方法及系统研究

针对大面积水域浓度场难以实现实时测量、测量精度不高等问题,采用了一种多通道荧光测试系统和方法。首先,基于单色光诱导荧光检测浓度(LIF)原理,使用探头获取离散点的浓度参数。然后,经总线或通信网络技术,将数百个测点连接起来。最后,通过数据总线或网络将采集的数据输送到中央测控计算机中,处理离散的数据后形成完整的浓度场。在恒定流浓度场中的试验结果表明,污染物测量相对误差均值不超过5%,单次测量相对误差最高值为8.33%,传感器线性度不超过5%,可检测的荧光素钠溶液浓度分辨率为0.001 ppm,系统测量稳定、精度较高。相较于其他浓度测量方法,该系统具有测量面积大、实时测量的优势,可为水污染防治等领域提供可靠的技术支撑。     

Testing scientific software: A systematic literature review

ContextScientific software plays an important role in critical decision making, for example making weather predictions based on climate models, and computation of evidence for research publications. Recently, scientists have had to retract publications due to errors caused by software faults. Systematic testing can identify such faults in code.ObjectiveThis study aims to identify specific challenges, proposed solutions, and unsolved problems faced when testing scientific software.MethodWe conducted a systematic literature survey to identify and analyze relevant literature. We identified 62 studies that provided relevant information about testing scientific software.ResultsWe found that challenges faced when testing scientific software fall into two main categories: (1) testing challenges that occur due to characteristics of scientific software such as oracle problems and (2) testing challenges that occur due to cultural differences between scientists and the software engineering community such as viewing the code and the model that it implements as inseparable entities. In addition, we identified methods to potentially overcome these challenges and their limitations. Finally we describe unsolved challenges and how software engineering researchers and practitioners can help to overcome them.ConclusionsScientific software presents special challenges for testing. Specifically, cultural differences between scientist developers and software engineers, along with the characteristics of the scientific software make testing more difficult. Existing techniques such as code clone detection can help to improve the testing process. Software engineers should consider special challenges posed by scientific software such as oracle problems when developing testing techniques.