阳离子型偶联表面活性剂改性硝酸铵性能研究

对阳离子型偶联表面活性剂膨化处理的改性硝酸铵进行了电镜扫描、孔径与孔容分布、粒径分布、比表面积、抗吸湿结块性及爆炸性能的实验研究，结果表明：同普通硝酸铵相比，阳离子型偶联改性硝酸铵的晶形不规则，富含气孔；比表面积大，可达3869．56cm^2／g；95％有效孔径处于介孔范围，有较小的粒径范围，主要分布在10～1000μm范围内；并且有良好的抗吸湿结块性，改性硝酸铵的吸湿率比普通硝酸铵的吸湿率降低约60％，抗压破坏力仅为普通硝酸铵的1／6，用其制得的粉状工业炸药具有更好的物理性能和爆炸性能。     

新型表面活性剂——烷基糖苷的合成与应用研究

以EDTA、十二烷基苯磺酸钠和磷酸为主要成份的复合催化剂，采用直接苷化法了十二烷基葡萄糖苷（C12－APG），考察了此非均相反应体系中的反应温度、反应时间、催化剂用量以及醇糖比对反应过程的影响，实验结果表明，在最佳的工艺条件下，反应时间为3．5h，糖苷得率可达到132．4％，并对其重用机理和所合成糖苷的应用性能了进一步探讨。     

表面活性剂聚集体的流变性质

以流变学基础知识为出发点，系统综述了胶束、微乳液，溶致液晶（层状、六角状、立方状），囊泡、虫状胶束等表面活性剂聚集体的流变性质及其剪切诱导结构转变现象的研究现状，总结了自流变性质的特点和理论模型，对具有黏弹性的表面活性剂活性剂聚集体进行了较为详细的论述，胶束稀溶液和微乳液多为牛顿流体；溶致液晶为非牛顿流体，有应力服价值和较高的黏弹性，囊泡的弹性性质比较突出，；虫状胶束体系具有非线性黏弹性，易形成网络结构；层状液晶、囊泡和虫状胶束等结构在剪切作用下能发生变化。这些结论对指导表面活性剂的研究和应用有重要意义。     

N,N,N-三甲基-2,3-二(硬脂酰氧基)丙基氯化铵(CDESA)的生物降解性

采用活性环氧中间体失水甘油基三甲基氯化铵合成了一种阳离子双酯表面活性剂——N,N,N-三甲基-2,3-二(硬脂酰氧基)丙基氯化铵(CDESA),来代替传统的难降解的表面活性剂型柔软剂,如目前国内仍在大量使用的双十八烷基二甲基氯化铵(D1821)。对CDESA的好氧降解性能进行了研究:以天然环境中的生活沉降污泥作为微生物源,用河水稀释,经培养、驯化后用于测试降解时间和半衰期,并与D1821的好氧降解性能作了对比。结果表明,CDESA的半衰期为3 d,容易降解,而D1821半衰期为7 d,较难降解,CDESA生物降解性能优于D1821。     

脂肪醇聚氧乙烯醚的厌氧与好氧生物降解性

以脂肪醇聚氧乙烯醚(AEO)为目标污染物，在等同条件下做厌氧消化污泥和好氧活性污泥对其生物降解性能的对比实验，得出了同一系列AEO分子中聚氧乙烯基与整个分子的降解难易程度的关系。表明：①污泥会对AEO分子产生吸附一脱附作用而出现假降解率，克服假降解率的干扰是准确测定AEO生物降解性的关键因素；②厌氧和好氧条件下，AEO均可降解，但厌氧降解要稍优于好氧降解；③AEO中聚氧乙烯基的单元数(n)是影响其生物降解的重要因素，相同碳链的直链烷基，生物降解率随n的增加而明显降低。     

Soap‐free emulsion copolymerization of perfluoroalkyl acrylates in the presence of a reactive surfactant

Soap‐free emulsion copolymerization of perfluoroalkyl acrylate (FA)/methyl methacrylate (MMA)/n‐butyl acrylate (n‐BA) was carried out in the presence of sodium 2‐acrylamide‐2‐methyl propanesulfonate (AMPSNa) as a reactive surfactant and potassium persulfate (KPS) as an initiator. An analysis of the effects of concentration of AMPSNa, KPS, FA as well as polymerization temperature on the kinetic features (rate of polymerization) and colloidal characteristics (mean particle diameter, particle disperse index, particle numbers, and surface charge density) was followed. NMR, FTIR, AFM, and fluorine‐selective electrode analysis were used to characterize the composition and morphology of the FA copolymers. Both AFM analysis and contact angle measurements strongly implied that the fluorinated segments migrated to the outmost surface and created films with lower surface energy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2438–2444, 2007     

Weight loss, polarization, electrochemical impedance spectroscopy, SEM and EDX studies of the corrosion inhibition of copper in aerated NaCl solutions

This work reports results of weight loss, potentiodynamic polarization and impedance measurements on the corrosion inhibition of copper in aerated non-stirred 3% NaCl solutions in the temperature range 15–65 °C using sodium oleate (SO) as an anionic surfactant inhibitor. These studies have shown that SO is a very good ”green”, mixed-type inhibitor. The inhibition process was attributed to the formation of an adsorbed film on the metal surface that protects the metal against corrosive agents. Scanning electron microscopy (SEM) and energy dispersion X-ray (EDX) observations of the electrode surface confirmed the existence of such an adsorbed film. The inhibition efficiency increases with increasing surfactant concentration and time of immersion, while it decreases with solution temperature. Maximum inhibition efficiency of the surfactant is observed at concentrations around its critical micellar concentration (CMC). The potential of zero charge (pzc) of copper was studied by ac impedance, and the mechanism of adsorption is discussed. The sigmoidal shape of the adsorption isotherm confirms the applicability of Frumkin’s equation to describe the adsorption process. Thermodynamic functions for the adsorption process were determined.     

SDBS的表面张力对天然气水合物生成的影响

利用德国KRUSS公司生产的界面张力仪K11中的板法测定十二烷基苯磺酸钠在不同温度(5,10,20,30,35℃)和不同浓度下(100,400,800,1200,1600,2000 mg/L)的表面张力,确定有利于天然气水合物合成的最佳浓度为1 200 mg/L,这在工业应用中有着重要的参考价值,同时分析了表面活性剂加速天然气水合物生成的机理。     

磺酸型Gemini表面活性剂的合成及表面活性

以壬基酚、1,4-二溴丁烷和氯磺酸为主要原料,通过三步反应合成了新型的磺酸型Gemini表面活性剂9BA-4-9BA,讨论了合成反应时间、温度以及催化剂对产物纯度和产率等因素的影响,优化了反应过程。利用核磁共振谱和红外光谱表征了产物结构,并通过DCTA21表面/界面张力仪测试其水溶液中的表面张力。和传统表面活性剂相比,合成的Gemini表面活性剂9BA-4-9BA具有更高的表面活性,其临界胶束浓度和C20分别为6.2×10-4mol/L和1.1×10-5mol/L。     

EFFECTS OF NONIONIC SURFACTANTS ON PERFORMANCE OF COPPER CHEMICAL MECHANICAL POLISHING

During copper chemical mechanical polishing (Cu-CMP), the physical properties of slurry, such as the dispersion and suspension stability of abrasives, the interaction between particles and the polished surface, and the rheological characteristics, greatly affect the planarization efficiency. In this study, several nonionic surfactants were added to change the aforementioned physical characteristics of slurry and Cu-CMP performance. Their effects were investigated. The experimental results showed that Al₂O₃ slurry with 300 ppm Triton DF-16 could enhance the wettability of the Cu surface and stabilize the dispersion of abrasives in the slurry. Therefore, the passivation reaction on the Cu surface during CMP would occur uniformly, and the removal of particles during post cleaning could be improved. Cu CMP using the slurry with an adequate amount of nonionic surfactants, Triton DF-16, is proposed to reduce the surface roughness, enhancing the planarity.