Xylose-lysine model systems: The effect of pH on the volatile reaction products

Aqueous molal solutions of xylose and lysine (initial pH 4–9) were refluxed either with control of the pH at 5–0 or without pH control (final pH 2–6). Analysis by gas chromatography (GC) and GC-mass spectrometry resulted in the identification of 58 and 28 compounds, respectively, from the two systems. Furans were the main reaction products in both systems and 2-furfural alone comprised 522 and 999 g kg^?1 of the volatiles, respectively, from the systems with final pH values of 5–0 and 2–6. Maintaining the pH at 5–0 resulted in a higher yield and greater numbers of nitrogen-containing compounds, and monocyclic pyrroles, pyridines and 2,3-dihydro-l H-pyrrolizines were identified only in that system. Aliphatic compounds, alicyclic compounds, benzene derivatives. l-(2–furfuryl)pyrroles and pyrazines were also identified. This investigation is the first report of the formation of 2.3-dihydro-l H-pyrrolizines in a model system containing lysine as the amino compound; a possible mechanism is proposed.     

有机-无机复合肥生产工艺

随着社会经济快速发展和城乡环境的污染已日趋严重。根据有机肥、无机肥各自的优缺点提出有机-无机肥生产的新工艺。     

有机盐聚合醇氯化钾钻井液的应用

霍尔果斯背斜构造极其复杂,内应力极高,地层倾角大,断层、破碎带多,并存在高低压互层;安集海河组的灰绿色软泥岩水化严重并具有粘弹塑性.该区块重点探井霍003井三开、四开井段选用有机盐聚合醇氯化钾钻井液,同时为保证钻井液在高密度下（2.55 g/cm^3）具有好的流变性,使用活化铁矿粉、活化重晶石加重.应用结果表明,由于采用了强抑制和多元封堵的措施,该钻井液具有良好的流变性和较强的携带能力,钻进中曾携带出重2.8 kg和5.1kg的大掉块;滤失量低,泥饼质量好,封堵能力强,造壁能力强,减轻了井下阻卡程度;有良好的储层保护能力;在室内研究的基础上,经过现场合理使用和维护钻井液,霍003井提高了机械钻速,缩短了钻井周期,井身质量优于邻井.指出在高密度下,未选出适合有机盐聚合醇氯化钾钻井液的稀释剂,钻井液流动性较差.     

Variations in Spectral Slope in Lake Taihu,a Large Subtropical Shallow Lake in China

Spectral slope (S), describing the exponential decrease of the absorption spectrum over a given wavelength range, is an important parameter in the study of of chromophoric dissolved organic matter (CDOM) dynamics, and also an essential input parameter in remote sensing models. Furthermore, S is often used as a proxy for CDOM composition, including the ratio of fulvic to humic acids and molecular weight. The relative broad range in S values reported in the literature can be explained by the different spectral ranges and fitting methods used. A single exponential model is used to fit the S values for 17 investigations involving 458 samples in Lake Taihu from January to October in 2004. The average S value was 15.18 ± 1.39 μm⁻¹ for the range of 280–500 nm, which fell within the range reported in the literature. The frequency distribution of S value basically obeyed a normal distribution. Significant differences in S values between summer and other seasons showed that phytoplankton degradation was one of the important sources of CDOM in summer, whereas CDOM mainly came from the river input in other seasons. Furthermore, the estimated S value decreased with increasing wavelength range used in regression. The maximum and minimum values derived from the regression were 17.89 ± 1.25 μm⁻¹ and 13.62 ± 2.11 μm⁻¹ for the wavelength ranges of 280–380 nm and 400–500 nm, respectively, a decrease of 23.9%. S values significantly decreased with the increase of CDOM absorption coefficients. CDOM absorption coefficients could be more appropriately estimated from exponential model introducing the variation of S with absorption coefficients, making them useful for a remote sensing bio-optical model of Lake Taihu. DOC-specific absorption coefficient a*(λ) and the parameter M describing molecular size of the humic molecules could also be used as a proxy for the sources and types of CDOM. A general relationship was found between S and a*(λ), and M values. S increased with the decrease of DOC-specific absorption coefficient and the increase of M corresponding to the decrease of molecular weight.     

Study on Dihydrated Praseodymium Acetylacetonate by Photoacoustic Spectra with Broad Wavelength Range

Photoacousticspectroscopy (PAS)hasbeenusedtonondestructivelyinvestigatealmostallkindsofsam ples,whetherthesampleiscrystalline ,powderorgel .PAspectr oscopyisacalorimetrictechniquewhichmeasurestheenergyabsorbedandsubsequentheatingofthesamplesduetoanonradiativerelaxationpro cess .ThereforePAScanbeusedtostudyopaque ,highlyreflectiveandscatteringsamples ,whicharedif ficulttostudybyconventionalspectroscopytech niques[1] .Withouttheneedofsamplepreparation ,PASavoidstheriskofsamplealteration ,pre…     

Effect of Organic Additives on Electrochemical Surface Precipitation and Polymorphism of CaCO3

The inhibition effect of three organic additives on the precipitation and polymorphism of CaCO₃ deposited on gold surfaces was investigated using electrochemical and microscopic techniques. Additives, two polyacrylic acid (PAA) polymers with different molecular weights (Mw 2100, Mw 30,000), and 1,2,4,5‐benzenetetracarboxylic acid (BTCA), were either added to the solution before or during deposition. In the presence of 100 ppm of one of the three additives in solution, almost no scale was observed on the surface for at least 24 hours. In the presence of lower concentrations of PAA Mw 2100, only distorted calcite crystals were obtained while with PAA Mw 30,000 the polymorph was spherical vaterite. A mixture of calcite and vaterite was observed with the BTCA additive. Addition of the polymers inhibits further nucleation and growth even if added after partial deposition of CaCO₃ while BTCA has no effect once nucleation has started. The results indicate that the inhibit ion effect of the PAA polymers is due to adsorption on the electrode surface while the effect of BTCA is related to chelation of calcium ions in solution.     

Hydrothermal Synthesis and Low-Temperature Sintering of Zinc Gallate Spinel Fine Particles

Nanosized powders of single-phase zinc gallate (ZnGa₂O₄) spinel were hydrothermally synthesized from solutions in the presence of NaOH over the pH range of 1.9 to 7.0 and from solutions above pH 7.0, i.e., the very basic medium (pH of 13.85), by removing the residual ZnO phase by washing with aqueous H₂SO₄ from the precipitate mixtures of zinc gallate spinel particles and ZnO. A very wide compositional range (Zn/2Ga = 0.705–1.157) of zinc gallate spinel solid solutions could be hydrothermally synthesized in the form of nanosized particles from acid and very basic mediums (pH of 2.4–13.85) in the presence of NaOH. These hydrothermally synthesized spinel powders showed good sinterability and almost full densification at 1100°C for 1 h. Dense sintered bodies consisting of single-phase zinc gallate spinel were fabricated at 1100°C using zinc gallate spinel powders having almost stoichiometric composition formed from the solution at pH 9.95 in the presence of aqueous ammonia.