Polynitroalcohols obtained through nitro aldol reaction between nitro oligomers and C1‐C2‐aldehydes

Polynitroalcohols (PNA) were obtained by A_N‐reaction of nitro oligomers from ground waste rubbers (NO‐GWR) with C₁‐C₂‐aldehydes in presence of organic bases triethanolamine, triethylamine and cyclopropylamine. The A_N‐reaction was studied at temperatures from 30 to 50°C, time 4 h, and NO‐GWR : aldehyde = 1 : 0.5/2.0 mass ratios in the solution. PNA were characterized by elemental analyses, such as ¹H NMR spectra, IR spectroscopy—baseline method with internal standard and thermal analyses. The quantitative functional composition of PNA (%NO₂, %C?O, and %OH groups) was proved to be similar to the composition of PNA obtained from model butadiene–styrene nitro oligomer (BSNO). It was concluded that NO‐GWR could replace NO based on elastomers in nitro aldol reaction with formaldehyde and acetaldehyde. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3241–3250, 2006     

Study on the anodic film formation process of AZ91D magnesium alloy

The formation of anodic film of AZ91D magnesium alloy has been investigated by means of electrochemical impedance spectroscopy (EIS), cyclic voltammetry, anodic polarization curve, current-time transients and SEM technique. The results show that, under our experimental conditions, the formation of AZ91D anodic film follows the mechanism of 3D nucleation with diffusion controlled growth. With the increase of applied anodizing potential, the nucleation type of anodic film changes from progressive to instantaneous. The results also show that the initially formed anodized film is threadlike and porous, and high potential is essential for the formation of good anodic film with excellent properties.     

气相色谱法测定有机化合物的蒸发热

本文用气相色谱测定了多种烷烃、芳烃、醇类和酯类的蒸发热。结果表明,测定数据与文献数据基本一致,误差一般在±5%以内。是一种简单、快捷的测定方法。     

表面活性剂包衣脂肪酶在有机溶剂中催化酯合成

用合成的谷氨酸二烷基酯核糖醇对来源于Candidarugosa的脂肪酶进行了包衣 ,以月桂酸与月桂醇的酯化为模型反应 ,研究了各种操作条件对包衣酶活性的影响。结果表明 ,包衣酶制备过程中的缓冲溶液的最适 pH为 6.8,谷氨酸双十二烷基酯核糖醇的包衣效果最好 ,最适反应温度为 3 0℃ ,最佳溶剂为异辛烷。在 10h内底物转化率达 94%。     

竹/玻璃钢复合建筑材料的研制及性能分析

竹/玻璃钢复合建筑材料是一种新型三维复合材料.本文对其进行了结构设计的研究,并通过大量试验对其力学性能进行了分析,结果证明竹/玻璃钢复合建筑材料确实是一种重量轻、性能好、工艺简单、价格便宜的材料,具有广阔的应用前景.     

The Structure of the Irreversibly Bound Adhesion Promoter-Substrate Interfacial Layer of γ-Aminopropylsilanetriol on Crystalline Si, as Measured by XPS and FTIR

The irreversibly bound interfacial layer deposited by the γ-aminopropysilanetriol adhesion promoter onto a crystalline silicon substrate, which remains even after profuse washing, was found by XPS to have resulted from the fragmentation and rearrangement of the original γ-aminopropylsilanetriol molecule. A mechanism is proposed, involving the homolytic scission of the terminal N-C bond. One of the subsequent reactions is believed to involve hydrogen loss by abstraction and the formation of a terminal vinyl group, which bonds to the substrate. Support for this mechanism is found in IR spectroscopy of this layer.     

Simulation of nitrogen dynamics and biomass production in winter wheat using the Danish simulation model DAISY

A dynamic simulation model for the soil plant system is described. The model includes a number of main modules, viz., a hydrological model including a submodel for soil water dynamics, a soil temperature model, a soil nitrogen model including a submodel for soil organic matter dynamics, and a crop model including a submodel for nitrogen uptake. The soil part of the model has a one-dimensional vertical structure. The soil profile is divided into layers on the basis of physical and chemical soil characteristics. The simulation model was used to simulate soil nitrogen dynamics and biomass production in winter wheat grown at two locations at various levels of nitrogen fertilization. The simulated results were compared to experimental data including concentration of inorganic nitrogen in soil, crop yield, and nitrogen accumulated in the aboveground part of the crop. Based on this validation it is concluded that the overall performance of the model is satisfactory although some minor adjustments of the model may prove to be necessary.     

纳米四氧化三铁磁性微粒的表面有机改性

通过液相共沉淀法制备了纳米四氧化三铁溶胶，利用油酸对纳米粒子体进行表面改性和萃取实验，获得油酸包覆的四氧化三铁微粒。采用FT—IR和高分辨透射电镜对改性后的纳米粉体进行结构和形貌的表征。研究结果表明油酸与四氧化三铁纳米粒子间存在化学键结合。油酸对纳米四氧化三铁微粒进行改性，并且对纳米粒子进行包覆，使外表面形成保护层阻止粒子团聚，改性后的四氧化三铁微粒与有机物具有良好的相溶性，采用表面改性显著改善了纳米四氧化三铁微粒的性能指标。     

肥料防结块缓释概况及性能快速表征方法探讨

介绍了颗粒肥料结块的原因机理、影响因素和传统的处理方法。简述了缓释肥料的特点、类型、加工方法以及国内外的研究发展状况。模拟肥料贮存、运输和施用环境以及设计装置，对颗粒肥料防结块、缓释性能快速表征方法进行了有益的探讨。对不同包膜尿素的测试结果表明，所设计的肥料养分释放模拟装置具有较好的应用前景。     

浅议我国钾肥工业的可持续发展

分析了我国可溶性钾盐资源短缺 ,钾肥工业发展速度缓慢 ,钾肥生产能力远远不能满足农业需求 ,国内庞大的钾肥市场长期依靠进口解决的现状 ,介绍了我国钾肥生产工艺技术、生产能力和消费情况。提出了加入WTO后 ,我国钾肥工业可持续发展的若干建议。