微波促进有机反应原理及微波有机合成仪

论述了微波促进有机反应的原理和微波加热的特点.对目前使用的家用微波炉和专用微波有机合成仪的性能进行了评价.指出微波促进有机反应需要解决的问题及我国应加强对该领域的研究.     

有机碱对莰烯直接乙酰化的影响

研究了在含氮有机碱存在下的莰烯直接乙酰化反应，结果表明，在反应中加入与莰烯等摩尔的六氢吡啶，有利于莰烯乙酰化反应，在反应液中的酰化产物ω－乙酰基莰烯含量最高达到56％，大大超过异构化产物乙酸异冰片酯。     

The influence of food emulsifiers on fat and sugar dispersions in oils. III. Water content,purity of oils

The influence of water on the interactions between fat and sugar crystals dispersed in triglyceride (vegetable) oils was qualitatively estimated from sedimentation and rheological experiments. The experiments were performed both with and without food emulsifiers (monoglycerides and lecithins) present in the oil. The effects of minor natural oil components (nontriglycerides) on the interactions and on emulsifier adsorption to the crystals were examined by comparing a commercial refined oil and a chromatographically purified oil. The results show that water generally increases the adhesion between fat and sugar crystals in oils and also increases the surface activity of the oil-soluble food emulsifiers. Minor oil components give a small increase in the adhesion between fat and sugar crystals in oils, but do not influence the adsorption of food emulsifiers in any systematic way.     

高纯过氧化氢生产中有机物杂质的净化技术进展

介绍了工业级过氧化氢中有机物杂质的来源,综述了高纯过氧化氢生产中有机物杂质的净化技术研究进展,包括精馏、吸附、离子交换树脂、溶剂萃取、结晶、膜分离技术以及这些技术的组合净化技术。精馏净化产品纯度不高,但技术成熟,可工业放大;膜分离净化技术较安全,但膜的寿命短;吸附树脂工艺简单、净化效率高,但树脂易被氧化。指出以精馏为前净化技术,再与膜分离、树脂吸附相结合是有机碳杂质去除技术的发展趋势。     

高分子金属配合物发光材料的制备技术进展

高分子金属配合物发光材料是一类很有价值的功能材料,评述了有关它的各种合成方法。以金属离子与含配位基团的聚合物进行反应,容易在高聚物之间形成交联,难以获得发光强度高的高分子配合物;使金属离子与高分子配体和小分子配体同时作用,可以得到荧光强度比较理想的产物,但反应难以定量控制;以小分子金属配合物单体与某些单体之间进行共聚合反应,也可获得荧光强度较高的高分子配合物,但聚合反应的空间位阻较大;通过两端都含有配位基团的刚性链的有机小分子配体直接与金属离子配合形成高分子金属配合物;以小分子金属配合物单体进行均聚或者将小分子金属配合物接枝到高聚物上也可以形成高分子金属配合物。     

Production of nanoparticles of copper compounds by anodic dissolution of copper in organic solvents

The anodic behaviour of copper was investigated in ethanol solution containing LiClO₄, LiCl electrolyte and water. The type of electrolyte and the water content influences the mechanism of the anodic process and the formation of anodic products. In LiClO₄ electrolyte the dissolution of copper is related to the oxidation of Cu(I) to Cu(II). In solutions of LiCl the etching of copper begins with the creation of soluble complexes of Cu(I) with chloride ions and solvent molecules. At potentials above 0.4 V the formation of alkoxides was observed in both solutions, characterized by a yellow tint. On the other hand, above 0.8 V (i.e. above the equilibrium potential of alcohol oxidation) copper dissolution is accompanied by the formation of a blue colloidal suspension of Cu (II) copper salt. Anodic etching of copper in solutions containing 3% H₂O at potentials higher than 0.4 V leads to the formation of colloidal suspension of copper oxide nanoparticles.     

ESTIMATION OF VAPOR PRESSURES OF ORGANIC NITROGEN AND SULFUR COMPOUNDS BY A GROUP-CONTRIBUTION METHOD

The group-contribution method for vapor pressures of hydrocarbons and organic compounds containing nitrogen or sulfur, based on the kinetic theory of fluids, is revised and extended to include new groups containing nitrogen or sulfur. Good representation is obtained for vapor pressure data in the region 1.30-270 kPa. The method may be used to estimate vapor pressures and enthalpies of vaporization for those organic fluids containing nitrogen or sulfur, where no experimental data are available.     

Process conditions affect pigment quality and yield in extracts of purple sunflower hulls

Extract of purple sunflower hulls is a potential red food colorant; however, suitable process conditions must still be identified. Selected process variables were studied using bench-scale units to prepare, clarify, concentrate and spray dry extracts. Concentration by evaporation at 32°C and addition of maltodextrin to 15% (wt/dry wt) prior to drying largely eliminated pigment degradation during those steps. Relative to water extracts, extracts prepared with 5 to 15% ethanol in water generally yielded more pigment with similar levels of degradation and loss during subsequent processing. Use of 5% ethanol/2% citric acid reduced yield by about half relative to water, but gave a powder with a lower degradation index and wetting time. Percentage recovery of pigment during concentration and drying was not greatly affected by solvent type or extraction temperature.     

有机硅改性丙烯酸酯核-壳结构压敏胶聚合物乳液的研制

采用种子乳液聚合的方法制备了一种新型具有核/壳结构的有机硅改性丙烯酸酯压敏胶聚合物乳液,讨论了多官能团有机硅氧烷功能性单体、核壳单体结构、乳化剂、引发剂以及聚合温度等因素对压敏胶聚合物乳液性能的影响。     

常见塑料溶解性能研究及其混合物的选择性分离

以常见塑料为原料,以有机物为溶剂,研究了塑料在有机溶剂中的溶解性能,提出了选择性分离混合塑料的方案。结果表明,实验所选用的塑料在有机溶剂中的溶解性能和溶解条件不同;可利用塑料与有机溶剂的相容性差别分离混合塑料。