预分离色谱法直接测定微量组份无限稀释活度系数

预分离色谱法可直接测定混合物中微量组份的无限稀释活度系数(γ~∞),而不必把此组份从混合物中分离出来。主要由四步组成:被测组份的预浓缩,被测组份的定性,选择预分离柱和γ~∞的测定。预浓缩样品经过预分离柱分出被测组份,然后进入测量柱测定γ~∞。此方法简捷、可靠与常规以纯溶质进样的色谱测y~∞的方法具有相同的测定精度,可广泛用于缺少纯样的场合。用此法测定了戊烯-1-炔-4、丁炔-2在若干酸醇中的γ~∞,分别求得了修正和未修正的UNlFAC参数,对kikic修正模型其值为ac=c,CooH=694.9(K)acooH,c=c=-99.08(K),ac=c,oH=812.99(K),aoH,c=c=143.36(K)     

多功能壳聚糖基防油剂在防油纸中的研究进展

壳聚糖是制备纸张防油剂潜在的理想材料,但其价格高昂、吸湿性强,需通过改性赋予其"一剂多效"功能(如在防油的同时兼顾防水、抗菌或水蒸气阻隔等功能),以提高其工业应用价值.结合壳聚糖的防油机理,总结了壳聚糖基防油剂防油性能的影响因素,综述了近年来防水型、抗菌型和水蒸气阻隔型壳聚糖基防油剂的研究现状,并对壳聚糖基防油剂的未来发展方向进行了展望.     

二氯苯同分异构体的毛细管气相色谱分析

选用聚乙二醇-20000(PEG-20M)高效石英毛细管气相色谱柱分析二氯苯异构体。在选用的色谱条件下，难分离物质间二氯苯和对二氯苯分离度达4．042。结果表明该法分离效果好，分析速度快。     

对环氧丁烷异构体定性分析的探讨

通过用标样、GC／MS、利用化合物的沸点规律和I值增量等方法，对环氧丁烷异构体进行全面的定性分析。同时在鲨鱼烷毛细管柱上分别于3个柱温下，测出了各组分的Kovats保留指数，找出了各组分保留指数与柱温的规律。     

Modification of phenol–formaldehyde resol resins by lignin,starch, and urea

Lignin‐based chemicals, starch, and urea were used as modifiers for phenol–formaldehyde resol resins. The effects of the addition stage of the modifiers used in the synthesis of the resins and the type of modification reagent on the structures of the resins and their molar masses and reactivities were investigated. The modifications with corn starch and lignin promoted condensation; this was verified by increased molar masses and high ratios of methylene bridges to the sum of free ortho and para aromatic groups with respect to the corresponding reference resin without a modification reagent. The later the modifier was added to the resin condensation mixture, the more methylene bridges were formed with respect to the amounts of free ortho and para aromatic groups. In addition, when urea or wheat starch was added in the later condensation stage, the final condensation also reached high stages. The modifications with lignosulfonate and starch, as well as the early addition of urea, enhanced p–p′ bridge structures. The lowest condensation stage and, therefore, the highest reactivity were found when wheat starch was added with the starting reagents. The curing heat of the wheat‐starch‐modified resins decreased according to the deferred addition point of starch. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 582–588, 2003     

Determination of the solubility parameter of poly(ethylene oxide) at 25°C by gas-liquid chromatography

The solubility parameter of poly(ethylene oxide) at 25°C has been determined using the method developed by DiPaola-Baranyi and Guillet, by the extrapolation of the values of the interaction parameter χ, at high temperatures, ranging from 70°–90°, 90°–110° and 110°–130°C down to 25°C. The values of the solubility parameter obtained, depending on the temperature ranges employed, are 9.8, 9.9 and 10.1, respectively.     

高效液相色谱法测定焦性没食子酸

在大量焦性没食子酸（９９％）存在下，采用甲醇－二甲基甲酰胺－磷酸－水为流动相和Ｍｉｃｒｏｓｏｒｂ—ＭＶＴＭＣ１８色谱柱，能很好地将没食子酸以及其它酚类杂质与其分离。该方法测定焦性没食子酸简便、准确，已应用于工业生产。     

气相色谱法测定石脑油中含氧化合物含量

本文论述了利用气相色谱法检测石脑油中含氧化合物的方法,考察了无阀切换技术、分离模式的设计、操作条件的优化等方面的问题。提出利用多维气相色谱法,采用一根非极性柱和一根极性柱进行独立和串联分离,通过改变辅助载气压力的无阀切换方式进行柱分离,应用双FID检测器进行信号检测,数据利用Agilent的chemestation工作站采集和输出。该方法操作简单,分析时间在23 min以内,重复测定结果的相对标准偏差(RSD)小于1.5%,标准加入回收率在95～105%范围内,方法准确可靠。     

浅析聚乙烯醇缩丁醛的低温流动性

瓷用花纸行业就PUB低温流动性提出更高要求。对此，就影响PUB低温流动性因素进行了分析探讨。     

Chromatographic performance of monodisperse–macroporous particles produced by “modified seeded polymerization.” I: Effect of monomer/seed latex ratio

In this study, the monodisperse–macroporous particles produced by a relatively new polymerization protocol, the so‐called, “modified seeded polymerization,” were used as column‐packing material in the reversed phase chromatography (RPC) of proteins. The particles were synthesized in the form of styrene‐divinylbenzene copolymer approximately 7.5 μm in size. In the first stage of the synthesis, the monodisperse polystyrene particles 4.4 μm in size were obtained by dispersion polymerization and used as the “seed latex.” The seed particles were swollen by a low‐molecular‐weight organic agent and then by a monomer mixture. The monodisperse–macroporous particles were obtained by the polymerization of monomer mixture in the seed particles. In the proposed polymerization protocol, the number of successive swelling stages was reduced with respect to the present techniques by the use of sufficiently large particles with an appropriate average molecular weight as the seed latex. A series of particles with different porosity properties was obtained by varying the monomer/seed latex ratio. The separation behavior of HPLC columns including the produced particles as packing material was investigated in the RPC mode using a protein mixture including albumin, lysozyme, cytochrome c, and ribonuclease A. The chromatograms were obtained with different flow rates under an acetonitrile–water gradient. The theoretical plate number increased and chromatograms with higher resolutions were obtained with the particles produced by using a lower monomer/seed latex ratio. The separation ability of the column could be protected over a wide range of flow rates (i.e., 0.5–3 mL/min) with most of the materials tested. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 607–618, 2004