The effect of aromatics on paraffin mild hydrocracking reactions (WNiPd/CeY–Al2O3)

The conversion of heavy paraffin and aromatics into a high-quality diesel fraction was performed in a microplant using a WNiPd/CeY-alumina catalyst. The effects of aromatics and naphtheno-aromatics on mild hydrocracking of hexadecane were studied at different concentrations. Two catalysts, with and without Pd and thermal treatment, were characterized by FTIR, XPS, and TPD of ammonia and ammonia plus naphthalene to complement previous study about the surface composition. The hydrocracking activity and selectivity were tested using different amounts and types of aromatics. This study demonstrated the presence of two acid strengths that contribute in different ways to paraffin and aromatics isomerization, ring opening, and cracking reactions. The product distribution obtained by mild hydrocracking of n-C₁₆ is between amorphous (SiO₂Al₂O₃) and Y-zeolite type of support. The aromatic adsorption on acid sites reduces the cracking rate and improves the survival of di- and tri-branched paraffin. A model for the path of reaction is discussed to explain the results.     

Direct synthesis and catalytic performance of ultralarge pore GaSBA-15 mesoporous molecular sieves with high gallium content

Mesoporous GaSBA-15 molecular sieves with different n_Si/n_Ga ratios have been directly synthesized using Pluronic 123 triblock polymer as a structure-directing agent by pH-adjusting method. The mesoporous materials have been characterized using ICP-AES, XRD, N₂ adsorption, ⁷¹Ga-MAS NMR, SEM and TEM. ICP-AES studies show a high amount of gallium incorporation on the silica pore walls. The structural and textural properties of calcined GaSBA-15 are characterized by XRD and N₂ adsorption. ⁷¹Ga MAS NMR results demonstrate that a high amount of tetrahedral-gallium could be substituted for Si in the framework of SBA-15. TEM and FE-SEM images show the uniform pore diameter and rope-like hexagonal mesoporous structure of GaSBA-15. These GaSBA-15 materials have been used as catalysts for vapour-phase t-butylation of 1,2-dihydroxybenzene (DHB) for selective synthesis of 4-t-butylcatechol (4-TBC) under different reaction conditions. GaSBA-15(10) gave the highest 93.2% conversion of DHB and 95.7% selectivity of 4-TBC as compared with other GaSBA-15 catalysts.     

Enzymatic biodiesel production: Technical and economical considerations

It is well documented in the literature that enzymatic processing of oils and fats for biodiesel is technically feasible. However, with very few exceptions, enzyme technology is not currently used in commercial‐scale biodiesel production. This is mainly due to non‐optimized process design and a lack of available cost‐effective enzymes. The technology to re‐use enzymes has typically proven insufficient for the processes to be competitive. However, literature data documenting the productivity of enzymatic biodiesel together with the development of new immobilization technology indicates that enzyme catalysts can become cost effective compared to chemical processing. This work reviews the enzymatic processing of oils and fats into biodiesel with focus on process design and economy.     

永州电力通信交换网集中操作和维护的实现

分析实现永州电力通信交换网集中操作和维护的必要性，介绍了实现程控交换机远程操作和维护的两种方式，总结在实践过程中所得到的经验和教训。     

在以纯碱为原料的非强酸性水溶液体系中采用酸碱滴定分析的误差来源及分析方法的改进

以三聚磷酸钠生产过程为例,论述了在以纯碱为原料的非强酸性水溶液体系中,由于反应不完全导致反应物中存在少量的碳酸盐,这部分碳酸盐干扰了用酸碱滴定法测量的中和度,并据此提出中和度分析改进方法.由此可以推广到其它以纯碱为原料的非强酸性水溶液体系中.     

Manufacturing and structural safety evaluation of a composite train carbody

This paper explains the manufacturing process of a composite train carbody with a sandwich composite structure for bodyshell and a stainless steel structure for the under frame. In addition, the structural behavior and safety of the composite carbody of the Korean tilting train was investigated by the static load tests. From the test results, the stiffness of the composite carbody met the specified design. In the aspect of strength, the maximum stress of the composite bodyshell was of 12.2% of strength of CF1263 carbon/epoxy.     

Separation of weak and strong acids by electro-electrodialysis—Experiment and theory

The experimental results of the separation of acetic acid (HA) from the sulfuric acid by the electro-electrodialysis (EED) method and the modeling of process have been presented. The Neosepta membranes CMX and ACM have been used. It has been found that the efficiency of retention of HA is high (>0.9) when the process is conducted below the limiting current density with respect to HSO₄⁻ or SO₄²⁻ anions. The observed current efficiency of the H₂SO₄ removal was rather low (CE_S = ca. 0.7, when the initial concentration of H₂SO₄ in the mixture was 1 or 2 M) which was caused by the nonideal selectivity of the anion-exchange membrane. The experimental results have been described by the model based on the extended Nernst-Planck equation and the Donnan equilibrium. Since the efficiency of the process depended mainly on the selectivity of anion-exchange membrane (ACM), the concentration of fixed charges of that membrane, , and the ratio of volume fraction of pores to their squared tortuosity, V_p/θ², have been chosen as the main fitting parameters. It has been found that the fitting of the EED data depends mainly on , whereas in the modeling of diffusion experiment (or an EED experiment conducted at low current density) both parameters are important. The best fit has been obtained for , i.e. ca. one order smaller than that determined experimentally. The obtained optimal value of V_p/θ², equal to 0.013, is consistent with those previously obtained for other Neosepta anion-exchange membrane.     

Self-controlled case series analyses: Small-sample performance

Second-order expressions for the asymptotic bias and variance of the log relative incidence estimator are derived for the self-controlled case series model in a simplified scenario. The dependence of the bias and variance on factors such as the relative incidence and ratio of risk to observation period are studied. Small-sample performance of the estimator in realistic scenarios is investigated using simulations. It is found that, in scenarios likely to arise in practice, asymptotic methods are valid for numbers of cases in excess of 20-50 depending on the ratio of the risk period to the observation period and on the relative incidence. The application of Monte Carlo methods to self-controlled case series analyses is also discussed.     

FDTD analysis of switching characteristics in magnetooptic functional devices using magnetostatic surface waves

Collinear magnetooptic interaction with magnetostatic surface waves (MSSW) can be used for wavelength‐selective switches, wavelength filters, and frequency shifters in wavelength‐division‐multiplexed (WDM) photonic networks and optical processing systems. The switching efficiency can be improved with a multilayer waveguide structure. To investigate the dynamic switching characteristics, the FDTD method was employed. The mode conversion between TE and TM mode was successfully demonstrated with FDTD simulation. The filtering characteristics were also evaluated. The FDTD results were compared with the result from the coupled mode theory, and good agreement was obtained. Switching of an optical pulse was also demonstrated by the FDTD method. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(1): 40–47, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20501