光纤氢气敏传感器的实验研究

本文介绍一种运用光纤干涉仪及其准外差检测系统对氢气分压强的检测方法。在光纤Mach-Zehnder干涉仪的传感臂上粘接一段长为3cm、厚为100μm的钯片,形成传感元。实验可检测到5×10~2Pa的氢气分压强。     

气相色谱在线分析变压吸附法制纯氢中的总碳

利用带镍加氢转化炉的气相色谱仪 ,在线分析变压吸附法制纯氢中的总碳。该法用变压吸附法制的纯氢作燃气 ,在检测器前端将氢气中的CO和CO2 转化为CH4,然后用氢火焰离子化检测器检测 ,直接以检测器的信号 (mV)进行定量。当氢气中总碳体积分数在 1 9～ 5 0 0 μl/L时 ,FID信号值与总碳体积分数有良好的线性关系。方法回收率为 99 90 %～ 10 1 9%,相对标准偏差 <1%。     

非化学计量LaNi5型储氢合金的性能

采用富La混合稀土与Ni、Co、Mg等元素组合，获得了一种非化学计量LaNi5型储氢合金、用金相、XRD和SEM-EDX等方法分析了该合金的组织结构，研究了合金的气相储氢特性以及电化学性能，结果表明：在1.6MPa氢压和温度29℃下，该合金的储氢量达到1.58%（质量分数），该合金的放电容量为380mAh/g。经300次循环后容量保持率为55%，该合金的基体是CaCu5型结构的LaNi5相，但有第二相（LaMg)Ni3析出，这种第二相的形成是导致该合金大容量的关键。     

Metallurgical failure analysis of cold cracking in a structural steel weldment: Revisiting a classic failure mechanism

Cold cracking of structural steel weldments is a well-characterized, well-documented, and well-understood failure mechanism. Extensive effort has been put forth to recognize the welding and materials selection parameters that are conducive to cold cracking; however, these engineering efforts have not fully eliminated the occurrence of such failures. This article describes cold cracking failure specifically related to the construction industry. This particular failure was successfully identified prior to final erection of the structural member, and the weld was successfully reworked. These actions potentially prevented a serious catastrophic event that could have occurred have occurred either later in the construction process or possibly during the use of the building. Individual welding parameters, such as electrode/wire selection, joint design, and pre/postheating, played a role in the failure, and a number of human factors relating to the actual fabrication practices also contributed to the failure process.     

注入氮离子的SiC涂层阻氢性能研究

利用离子束混合－离子注入（Ar^ ）和磁控溅射相结合的实验技术在HR－1不锈钢基体上制备了注入N^ 的SiC涂层，并用表面分析手段对所制备涂层的表面形貌，剖面形貌、相结构，表面成分，表面元素的化学态进行了分析，结果表明：制备的涂层结构致密，表面平整、膜层成分均匀；涂层与基体之间形成了一明显的过渡层，增强了涂层和基体之间的结合力，用二次离子质谱（SIMS）对充氘涂层的阻氢性能进行了定性分析，结果表明，涂层元素与氢形成稳定的化学键，抑制了氢的扩散和迁移，使得涂层具有一定的阻氢能力。     

An IR study on ion-specific and solvent-specific swelling of poly(N-vinyl-2-pyrrolidone) gel

Swelling degrees of poly(N-vinyl-2-pyrrolidone) (PVP) gel were measured in aqueous salt solutions and in water/organic solvent mixtures to find marked ion- and solvent-specificities. In order to investigate any correlation of those specificities with hydration or solvation of PVP, IR spectra band of the CO group was monitored by means of ATR method both for PVP gel and the relevant solution systems. Dependence of the peak frequency on the swelling ratio suggested that hydration of PVP carbonyl group in deswollen gel systems is different from that in the corresponding solution systems. In the solution systems, PVP carbonyl band showed a high-wavenumber shift for deswollen systems, which can be well correlated with changes in water proton charge through ionic hydration and with Gutmann's acceptor number of organic solvents. In the deswollen gel systems, the CO band showed a low-wavenumber shift, suggesting a strong hydration or doubly hydrated state. This unexpected behavior was interpreted by assuming an intermolecular hydrogen bond of two carbonyl groups intermediated by water molecules.     

重油催化裂化干气氢提纯技术的开发

石家庄炼油厂和西南化工研究设计院合作开发的中国石化系统第一套利用变压吸附技术进行RFCC干气氢提纯工业试生产装置一年的平稳运行说明：提纯后产品氢纯度达99．9％，回收率大于85％；操作简便灵活；装置负荷弹性裕度大；经济效益显著。实践证明它是一项富有吸引力的新工艺，为重油催化裂化装置的挖潜增效展示了美好的前景。     

加氢裂化反应器新型冷氢箱的研究与工程设计

报道了加氢加化反应器新型旋流式冷氢箱的研究设计及实用效果，催化剂床层径向温差不大于5℃。     

Electron-Impact Cross Sections for Dipole- and Spin-Allowed Excitations of Hydrogen,Helium, and Lithium

Electron-impact excitation cross sections are presented for the dipole- and spin allowed transitions from the ground states to the np ²P states for hydrogen and lithium, and to the 1snp ¹P states for helium, n = 2 through 10. Two scaling formulas developed earlier by Kim [Phys. Rev. A 64, 032713 (2001)] for plane-wave Born cross sections are used. The scaled Born cross sections are in excellent agreement with available theoretical and experimental data.     

钛及钛合金中氧和氢的联合测定

叙述了用红外吸收法对钛及钛合金中氧和氢联合测定的方法，取得了测定的最佳条件。连续测定6次的相对标准偏差在10％以下，作加标回收试验的回收率为95．6％～103．9％。分析时间在3min以内，可应用于日常分析，结果满意。