纳米白炭黑的表面改性及其在氯丁橡胶中的应用

研究纳米白炭黑经硅烷偶联剂(Si-75)湿法改性后对氯丁橡胶抗疲劳性能的影响，并对改性剂的用量、改性工艺条件进行了优化。实验结果表明：适当改性后的纳米白炭黑可显著提高氯丁橡胶的抗撕裂和抗疲劳性能。     

环氧树脂的改性研究进展

概述了近年来利用互穿网络法、液晶增韧法、纳米粒子增韧等改性环氧树脂的新方法。     

Surface modification of tetrafluoroethylene–perfluoroalkyl vinylether copolymer (PFA) by plasmas for copper metallization

Tetrafluoroethylene–perfluoroalkyl vinylether copolymer (PFA) sheet surfaces were modified with argon, helium, oxygen, and hydrogen plasmas. How the four plasmas modified the PFA sheet surfaces was investigated. All plasmas modified the PFA surfaces and at the same time initiated degradation of the PFA polymer chains. The balance between modification and degradation was strongly influenced by the magnitude of the discharge current in the plasmas. Efficiency of the plasmas in modification was hydrogen plasma > oxygen plasma > argon plasma > helium plasma. The modification involved defluorination of CF₂ carbons into CHF and CH₂ carbons and oxidation into O? CH₂, O? CHF, and O? CF₂ groups. The surface‐modification technique (a combination of hydrogen plasma treatment and silane coupling treatment) proposed in this study was applied for copper metallization of the PFA surface. The utility of the technique was confirmed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1087–1097, 2002     

Surface modification of a biomedical poly(ester)urethane by several low‐powered gas plasmas

Several low‐powered gas plasmas were employed to treat a biomedical poly(ester)urethane using the treatment gases of CO₂, O₂, NH₃, and SO₂ with different treatment time (2, 5, 10, and 15 min). The changes of the physical and chemical characteristics of the biopolymer surface were studied. Surface morphology was evaluated by scanning probe microscopy, which showed increased roughness of the surface after plasma treatment. The wettability of the surface was examined by static water contact angle (SCA) measurements, which presented that there was a decrease of SCA in all plasma treatments compared with the untreated surface and that each gas plasma had an optimum treatment time accompanied by a minimum contact angle. X‐ray photoelectron spectroscopy indicated the changes of the surface functional groups. The data demonstrated that CO₂ and O₂ plasmas resulted in the incorporation of oxygen‐containing groups, while NH₃ plasma resulted in the combination of nitrogen‐containing groups, and SO₂ plasma resulted in the formation of sulfur‐containing groups. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1273–1282, 2006     

叔碳酸乙烯酯的性能及其应用

介绍了叔碳酸乙烯酯的性能及其应用。叔碳酸乙烯酯是一种多支链一元饱和羧酸乙烯酯，其α碳原子上丰富的烷基形成的空间位阻和烷基的非极性，使其表现出优异的抗紫外线性能和极强的疏水性能，从而使其聚合物或共聚物具有耐候性、耐水性、耐碱性好和表面张力低等特点。其分子中的双键使其具有很好的反应性，能与乙烯、丙烯酸酯、苯乙烯等具有双键的单体进行共聚，提高其共聚物的性能，拓宽应用范围，是一种优良的改性单体。     

适宜于光聚合过程应用的荧光探针研究

研究了两种探针化合物在安息香醚引发烯类单体光聚合反应中的应用，发现在光聚合反应中，不同的探针化合物有着不同的光谱响应特征和溶致变色行为，显然，这对探针的灵敏度会带来影响。实验结果表明：探针化合物在光聚合反应中能否应用，其光照稳定性起着关键作用，本工作推荐了一种适宜在烯类单体光聚合反应中应用的探针化合物。     

过磷酸钙折流混合器的改进

由于绿原化工有限公司过磷酸钙装置生产能力由 6 70 t/ d(实物量 )提高到 84 0 t/ d,折流混合器负荷增大 ,出现折流环磨损加快等问题。采用若干技改措施 :扩大折流环内径、改变折流混合器喷射方向、采用新材料制作折流环 ,使折流混合器能满足 84 0 t/ d过磷酸钙生产的需要     

大面积水域浓度场测试方法及系统研究

针对大面积水域浓度场难以实现实时测量、测量精度不高等问题,采用了一种多通道荧光测试系统和方法。首先,基于单色光诱导荧光检测浓度(LIF)原理,使用探头获取离散点的浓度参数。然后,经总线或通信网络技术,将数百个测点连接起来。最后,通过数据总线或网络将采集的数据输送到中央测控计算机中,处理离散的数据后形成完整的浓度场。在恒定流浓度场中的试验结果表明,污染物测量相对误差均值不超过5%,单次测量相对误差最高值为8.33%,传感器线性度不超过5%,可检测的荧光素钠溶液浓度分辨率为0.001 ppm,系统测量稳定、精度较高。相较于其他浓度测量方法,该系统具有测量面积大、实时测量的优势,可为水污染防治等领域提供可靠的技术支撑。     

高速气流冲击式粉体表面改性装置——HYBRIDIZATION系统及应用

利用高速气流冲击法进行粉体/粉体系表面改性技术,是迄今为止各种粉体材料开发中最为引人注目的技术之一。HYBRIDIZATION(下称HYB)系统是利用高速气流冲击法对微粉体进行干式/机械化处理,是使材料复合化的最实用的装置,可对各类有机物、无机物、金属等进行广泛组合,通用性很强,适用于许多行业领域。从本文所述的系统构成、型式,有关的典型球形化处理的运转特性,利用复合化高温粉体测定被处理粉体表面温度,利用颜料改变色调等的处理特点及该系统的适用性等(一部分是从已发表的学术论文及专利上摘录的),可以说明HYB系统的概况。     

柔性复合材料改造城市燃气管道性能研究

在西气东输中采用柔性复合材料改造城市原有煤气管道接头来输送天然气是一种经济、实用的方法.本文介绍了一种高性能的聚氨酯-涤纶布-铝箔复合材料内衬的煤气管道接头密封连接结构,还介绍了"诺迪霸工艺",并按有关试验标准,对管道接头密封结构进行了气密性、耐气压、抗弯曲、抗剥离强度及人工加速老化等试验.试验结果证明,这种结构形式和施工工艺性能优良、安全可靠,能够满足天然气输送.