An innovative technique for web text watermarking (AITW)

ABSTRACT

Embedding a hidden stream of bits in a cover file to prevent illegal use is called digital watermarking. The cover file could be a text, image, video, or audio. In this study, we propose invisible watermarking based on the text included in a webpage. Watermarks are based on predefined structural and syntactic rules, which are encrypted and then converted into zero-width control characters using binary model classification before embedding into a webpage. This concept means that HTML (Hyper Text Markup Language) is used as a cover file to embed the hashed and transparent zero-width watermarks. We have implemented the proposed invisible watermarking against various attacks to reach optimum robustness.     

机械开关硬件消抖电路设计

通过分析机械开关产生抖动的原因和可能造成的影响,指出了设计机械开关消抖电路的必要性,给出了三种硬件消抖电路的设计方法,电路简单,工作稳定可靠,可在数字电路设计中广泛使用。     

Perfect forward secure identity-based authenticated key agreement protocol in the escrow mode

The majority of existing escrowable identity-based key agreement protocols only provide partial forward secrecy. Such protocols are, arguably, not suitable for many real-word applications, as the latter tends to require a stronger sense of forward secrecy—perfect forward secrecy. In this paper, we propose an efficient perfect forward-secure identity-based key agreement protocol in the escrow mode. We prove the security of our protocol in the random oracle model, assuming the intractability of the Gap Biline...     

Elastic block ciphers: method, security and instantiations

We introduce the concept of an elastic block cipher which refers to stretching the supported block size of a block cipher to any length up to twice the original block size while incurring a computational workload that is proportional to the block size. Our method uses the round function of an existing block cipher as a black box and inserts it into a substitution- permutation network. Our method is designed to enable us to form a reduction between the elastic and the original versions of the cipher. Using this reduction, we prove that the elastic version of a cipher is secure against key-recovery attacks if the original cipher is secure against such attacks. We note that while reduction-based proofs of security are a cornerstone of cryptographic analysis, they are typical when complete components are used as sub-components in a larger design. We are not aware of the use of such techniques in the case of concrete block cipher designs. We demonstrate the general applicability of the elastic block cipher method by constructing examples from existing block ciphers: AES, Camellia, MISTY1, and RC6. We compare the performance of the elastic versions to that of the original versions and evaluate the elastic versions using statistical tests measuring the randomness of the ciphertext. We also use our examples to demonstrate the concept of a generic key schedule for block ciphers.

传统织物的一次性设计

通过对纤维艺术的学习与研究,我对纤维构成织物的设计有了进一步的思考。在传统编织基础上不断发展起来的现代纤维艺术,一方面在艺术领域得到了有目共睹的长足发展,另一方面在市场经济下也不断地回归实用与设计。在纤维构成织物的设计中包括直接完成半成品或成品的一次性设计和在此基础上进行的二次性设计。尤其,对"传统织物的一次性设计"进行研究是很有必要的。     

“理想证据合成公式”的不存在性

本文以“经典未确知集合”理论为基础,证明“理想证据合成公式”的不存在性,从而向人们指出;在研究专家系统理论时,企图寻找一个“理想证据合成公式”,就像人们想做成一台永动机或完成“任意角的三等分”一样是徒劳无功的。     

Dynamic response of Kevlar®29/epoxy laminates under projectile impact-experimental investigation

This authors of this article investigated the dynamic response of woven Kevlar®29/epoxy laminates subjected to the impact loading. The cylindrical aluminum foam projectile and steel projectile were used to exert the impulse on the laminates. Deformation/failure modes, deflections, strain histories, and failure mechanisms were obtained and discussed. The results showed that with the high toughness of Kevlar fiber, the deformation modes of the laminates exhibited some characteristics similar to the metal panel, such as large global deformation. The failure mechanisms like matrix failure, fiber splitting, and fibrillation were observed. These micron failures led to the macroscopic delamination and fracture of the laminates.     

具有保温性能的电纺LA/PET纳米纤维复合织物的制备与表征

本文制备了电纺月桂酸(LA)/聚对苯二甲酸乙二醇酯(PET)纳米纤维/机织物的复合织物,并对其进行了表征.选用纯棉纱线、毛纱线、涤棉纱线、腈纶纱线和涤纶纱线分别作为经纬纱线,在实验室制备机织物小样,同时,通过静电纺丝法制备LA/PET纳米纤维,将LA包裹在PET基材之中.之后通过缝合的方式,将电纺LA/PET纳米纤维和机织物构造成三明治结构的复合织物.对纳米纤维的形貌和热性能进行了表征,并分别探究了LA/PET的质量比,机织物组织结构和机织物材料对复合织物保温性能的影响.结果表明:LA/PET纳米纤维呈圆柱形,具有光滑表面,LA和PET展现出良好的相容性,热焓值略低于理论值,但相变温度改变不大.复合织物的热保温性能测试表明,复合织物的保温性能都优于未加入相变材料的织物,同时展现出良好的热循环稳定性.     

中空涤纶/不锈钢/竹炭保温透湿材料的开发及性能研究

通过花式捻线方法将中空涤纶、不锈钢长丝和竹炭纤维三种功能性纤维并捻获得复合纱线,利用纱线强度、毛羽和实际捻度测试,得到最佳的纱线纺制参数。并采用最佳工艺参数纺制的包绕纱线进行平纹织物织造,对其织物透湿性、远红外发射率以及保温性能进行测试表征,最终制备一种可用于防寒服的新型保温透湿织物。结果表明,缠绕捻度为上捻度200,下捻度0时,纺制的包芯纱具有最佳捻度。中空涤纶/不锈钢/竹炭织物透湿率为5 184g/(m2·24h),达到透湿织物透湿要求的2倍以上。一至四层织物的远红外发射率均在70%及以上,符合远红外发射率具有功能性结果的范围。织物克罗值达到7.355clo,高于极低温作业穿着克罗值51.6%,可满足极低温环境下的织物保温要求。织物保温率为62.43%,相比于棉、毛等传统纺织原料,织物保温率可以提升2倍以上。     

Novel transcatheter aortic heart valves exhibiting excellent hemodynamic performance and low-fouling property

Transcatheter aortic heart valves (TAHVs) have been widely used for aortic valve replacements, with less trauma and lower clinical risk compared with traditional surgical heart valve replacements. In the present study, composites of poly(ethylene glycol) diacrylate (PEGDA) hydrogels and anisotropic high-shrinkage polyethylene terephthalate/polyamide6 (PET-PA6) fabric (PEGDA/PET-PA6) were fabricated as artificial heart valve leaflets. Dynamic mechanical analyses (DMA) indicated that PEGDA/PET-PA6 composites possessed anisotropic mechanical properties (i.e., storage moduli ～23.30 ± 1.36 MPa parallel to the aligned fabric fibers and ～9.68 ± 0.90 MPa perpendicular to the aligned fibers at 1 Hz) that were comparable to aortic valve leaflets. The PEGDA/PET-PA6 composites with smooth surfaces were highly hydrophilic (contact angle ～41.6° ± 3.8°) and had low-fouling properties without platelet adhesion, suggesting a low risk of thrombogenicity when they interacted with blood. Furthermore, transcatheter aortic heart valves were fabricated using nitinol self-expanding frames and PEGDA/PET-PA6 composites as artificial leaflets, which presented excellent hemodynamic performance with a large orifice area (1.75 cm²) and low regurgitation (3.41%), thus meeting the requirements of ISO 5840-3 standard. Therefore, PEGDA/PET-PA6 composites had suitable mechanical properties, good biocompatibility, and low-fouling properties, indicating that they might be used for TAHVs in the future.