Comparison of activities in selective catalytic reduction of NOx by C3H8 over Co/MFI, Fe/MFI, and H/MFI zeolite catalysts

The Co/MFI(SiO₂/Al₂O₃ = 30) were prepared by a precipitation method with NaOCl in alkali solutions exhibited high activities to N₂ at 250 °C for the selective catalytic reduction (SCR) of NO_x. These catalysts showed two UV–vis bands at 700 and 400 nm, indicating the presence of octahedral Co(III) as well as tetrahedral Co(II). The high SCR activity over such Co(III, II)/MFI(30) seems to come from Co(III)---O moieties. The Co(II)MFI(30) catalysts prepared from Co(II)Cl₂ exhibited low SCR activities due to the presence of tetrahedral Co(II) ions in MFI. Less CO formation occurred over Co/MFI catalysts. The Fe/MFI(30) catalyst exhibited high activity due to the presence of some Fe---O species in MFI but more amount of CO were produced during SCR. H/MFI(30) catalyst exhibited a good SCR activity. However, more amount of carbonaceous deposits were produced on it. The correlation between acid concentration and SCR activity was discussed over H/MFIs.     

（E）-2-壬烯酸合成方法的改进

(E)-2-壬烯酸是有机合成的一种重要中间体,我们利用Knoevenagel反应机理,改进了(E)-2-壬烯酸的合成工艺,在不使用脱水剂条件下,使用少量吡啶作催化剂,获得了83%的反应收率。     

Highly ordered microstructures of poly(styrene-b-isoprene) block copolymers induced by solution meniscus

Microstructures of hundreds of micron thick poly(styrene-block-isoprene) copolymer films solution-cast in a cylindrical tube with the solvent evaporation controlled were investigated by transmission electron microscope (TEM), small angle X-ray scattering (SAXS) and optical microscope (OM). In a block copolymer with cylindrical polyisoprene microdomains, the orientation of the cylinders was varied along radial direction of the cylindrical tube. Highly aligned hexagonal arrays of in-plane polyisoprene cylinders were formed with their cylindrical axis parallel to the circumference of the tube in the regimes close to the wall edge. In contrast randomly ordered microdomains were observed at the center of the tube. We have also found that the orientation depends on the solvent evaporation rate and an intermediate rate (∼2.3 nL/s) provides the best orientation. In the case of a block copolymer with a bicontinuous double gyroid structure, we obtained a globally ordered microstructure where [111] crystallographic direction was parallel to the circumference of the tube. For both block copolymers, the area of highly ordered arrays of nanoscopic domains is over 1 mm². Development of the orientation was explained by coupling two orthogonal fields: (1) The flow of a solution induced by strong capillary force at a meniscus between the cylindrical tube wall and the block copolymer solution and (2) the solvent evaporation.     

基于Delphi的报童模型的实现与动态仿真

已往库存论中的决策模型,它是把现实过程用数学的方法进行分析,得到决策值,但不能看到决策的过程,不能反映出现实生活中的不确定性、动态性。运用Delphi 7.0和SQL server 2000对销售过程进行了动态仿真,利用Newsboy模型的推广(S,s)订购策略来监控库存并做出决策,这样就体现出此过程的不确定性、动态性;且举出了一个仿真商品销售的实例,对其中的一些关键技术,如何仿真、算法的实现等进行了阐述。     

世界各国(或地区)推进RFID的策略

介绍了一些国家和地区发展RFID的政策和推进措施，总结了各国发展RFID的共性。     

国际放射防护委员会的剂量系数的可靠性

在评价公众成员摄入放射性核素的辐射危害时，需估算每单位摄入量所致的剂量。摄入放射性素后器官或民受到的剂量是受到的剂量是通过生物学模型和剂量学模型来确定的，因此剂量也必须根据模型来确定。文中初步探讨了国际放射防护委员会给出的剂量系数的可靠性问题。文中首先说明了估算剂量系数的概念和方法，然后分析了剂量系数估算中，采用胃肠道模型，呼吸道模型，系统生物动力学模型和剂量学模型所遇到的不确定度的各种主要来源。     

烧成及热处理工艺对钛酸锶铅基热敏材料性能及显微结构的影响

研究了烧成及热处理工艺对钛酸锶铅基热敏材料的阻温特性及显微结构的影响。通过扫描电镜（ＳＥＭ）和能量分散仪（ＥＤＡＸ）分析了材料的显微结构及不同形貌晶粒的成份。通过对组成、烧成及热处理工艺的控制，可得到具有Ｖ型ＰＴＣＲ特性的热敏材料。     

工业工程继续教育和高等教育自学考试方案研究

根据作者参与工业工程（ＩＥ）研究和学术活动的实践，阐述了如何把学习国外先进经验与中国国情相结合，并以机电制造工业为主要对象，研究和设计了ＩＥ专业继续教育和高等教育自学考试教学计划。同时说明了该计划的实施，为大批培养社会迫切需要的ＩＥ人才创造了条件，并对我国ＩＥ学科建设起到了积极的推动作用。     

反应堆材料热物性数据库管理系统

衡量一个数据库的质量，不以要看其所包含的数据还应考虑数据库管理系统的使用功能。为了更有效地实施ＩＡＥＡ的ＣＲＰ（ＣｏｏｒｄｉｎａｔｅｄＲｅｓｅａｒｃｈＰｒｏｇｒａｍｍｅ）中有关建立反应堆材料热物性数据库的计划，并考虑到能使所收集的数据方便地为用户服务和进行广泛的国际交流，为此设计并编制了该数据库的软件管理系统ＴＰＳＹＳ。这个系统可在ＩＢＭ－ＰＣ（３８６，４８６）等兼容机上运行，采用人机对话、菜单提示、全屏幕操作。其主要功能有：数据库维护、数据检索、与大型计算程序ＭＡＴ－ＰＲＯ接口和与国际上现有的数据库ＴＨＥＲＳＹＳＴ接口。     

测井数据实时采集与接口设计

介绍了一种采用改进型的ＣＬＳ３７００数控测井系统对微电阻率扫描仪数据采集与控制接口的设计及实现方法。基于ＣＬＳ３７００数控测井仪和ＦＭＳ仪采用８９Ｃ５１单片机设计出通信接口，解决了微电阻率方法。基于ＣＬＳ３７００数控测井仪和ＦＭＳ仪采用８９Ｃ５１单片机设备出通信接口电路，解决了微电阻主扫描仪现现场实时处理中的瓶颈问题。