从烟草悬浮细胞中分离液泡前体的方法研究

通过跟踪含有液泡前体特异标记物的组分, 利用细胞壁酶水解胞壁制造原生质体, 并用真针头挤压的方法裂解细胞, 用蔗糖密度梯度离心的方法分离液泡前体. 通过相差显微镜观察, 发现所分离的液泡前体保持完整的结构. 利用不同细胞器的标记物抗体进行免疫标记检测, 证明所纯化的液泡前体不含其他细胞器, 具有较高的纯度.     

SHS of shape memory CuZnAl alloys

Aiming at preparation of shape memory alloys (SMAs), we explored the SHS of Cu_{1 − x} Zn_{1 − y} Al_{1 − z} alloys (0.29 < x < 0.30, 0.74 < y < 0.75, and 0.83 < z < 0.96). The most pronounced shape memory effect was exhibited by the alloys of the following compositions (wt %): (1) Cu(70.6)Zn(25.4)Al(4.0), (2) Cu(70.1)Zn(25.9)Al(4.0), and (3) Cu(69.9)Zn(26.1)Al(4.0). The effect of process parameters on the synthesis of CuZnAl alloys was studied by XRD, optical microscopy, and scanning electron microscopy (SEM). The grain size of CuZnAl was found to depend on the relative amount of the primary CuZn and AlZn phases. Changes in the transformation temperature and heat of transformation are discussed in terms of ignition intensity and compaction. Mechanism of the process depends on the level of the temperature attained relative to the melting point of components. At the melting point of AlZn, the process is controlled by the solid-state diffusion of AlZn into a product layer. The ignition temperature for this system depends on the temperature of the austenite-martensite transformation in CuZnAl alloys. The composition and structure of the products was found to markedly depend on process parameters. The SHS technique has been successfully used to prepare a variety of SMAs.      

Investigation of the use of ram horn hydrolysate for fungal protein production

Production of the fungus Aspergillus niger NRRL 330 was studied in submerged fermentation with ram horn hydrolysate (RHH) as substrate. The characteristics of RHH have been reported previously. The RHH was enriched by addition of glucose and KH₂PO₄. The effects of kinetic parameters on the biomass yield of the fungus were investigated. The optimal conditions for growth of A niger on RHH were initial pH 6.5, temperature 30 °C, fermentation time 96 h and agitation speed 150 rpm. Under these optimal conditions the initial carbohydrate content of RHH was reduced from 1.52 to 0.2% and the biomass yield was 8.9 g l^?1. The biomass contained about 48.1% protein, 5.2% fat and 9.4% ash (on a dry weight basis). The amino acid content of the biomass was compared with Food and Agricultural Organisation (FAO) and animal feed standards. The protein produced contained all the essential amino acids for animal feed, but the amounts of these amino acids were somewhat lower than those of FAO and soybean reference protein. However, the amino acid composition of the biomass was better than that of animal feed. The results with RHH were also compared with previously reported data on fungal mycelium grown on waste liquor substrate. In conclusion, it was found that RHH could be used as a substrate in the production of fungal protein for use as animal feed. Copyright © 2003 Society of Chemical Industry     

Protein Extraction from Heat-stabilized Defatted Rice Bran: II. The Role of Amylase, Celluclast, and Viscozyme

ABSTRACT: The effectiveness of 3 carbohydrases for protein extraction from heat-stabilized defatted rice bran (HDRB) was evaluated. Amylase, viscozyme and celluclast extracted a maximum of 45.4, 12.1, and 28.5% protein, respectively. Further study showed that extracted protein ranged from 9.5 to 58.4% under conditions of water to bran ratio (5:1 to 20:1), α-amylase (0 to 110000 units/10 g rice bran), temperature (35 to 55 °C), and time (1 to 8 h). The maximum protein extracted was 58.4% with a water to bran ratio of 17:1, 87637 units amylase, and 50.9 °C. These results suggest that impure food-grade amylase containing protease is more effective than celluclast and viscozyme in protein extraction from HDRB.     

影响道路沥青低温抗裂性能的因素

用弯曲梁流变仪、直接拉伸试验机对7种国内外油源沥青样品进行了低温抗裂性能的评价，从沥青的四组分、相对分子质量及其分布来分析其对沥青低温抗裂性能的影响，结果表明，沥青的相对分子质量分布宽，对沥青的低温抗裂性能有利。     

Surface segregation studied by low-energy ion scattering: experiment and numerical simulation

The changes in surface composition of metallic alloys caused by segregation can be very efficiently studied by low-energy ion scattering (LEIS) due to the specific surface sensitivity of this technique. Investigations of single-crystal surfaces of ordered alloys are of particular interest because they provide the possibility to investigate the interplay between segregation effects and the order-disorder phase transition when passing through the transition temperature. Exemplifying these effects for bimetallic alloys we consider in particular the CuAu-system.For the quantitative interpretation of energy and angle resolved LEIS intensity distributions we compare experimental results with those from numerical simulations using the MARLOWE code which we extended with a detailed trajectory analysis. This allows us to apply various discrimination criteria, such as number of collisions, distance of closest approach, identification of the scattering crystal layer, total path length, etc. On this basis structural effects, ion survival probabilities and the influence of thermal vibrations can be studied.We demonstrate this potential by using CuAu(1 0 0) as a special example. The scattering potential parameters were calibrated with elemental single crystals of known structures and the anisotropic Debye temperatures taken from the literature showed good agreement, neutralization was of minor importance in this case. Our procedure could be successfully used for the quantitative analysis of the composition of the first and second layer as a function of temperature. These results are in good agreement with theoretical predictions.     

铸铁热分析用试样新型激冷剂的实验研究

从冷却曲线上相变段倾角最小原则出发，研究了新型激冷剂的配比与热分析法检测铸铁成分精度的关系，实验结果表明，能使相变段倾角最小的成分配比，也能提高对铸铁成分的热分析和检测精度。     

HIS变换用于数字化航空片影象同多光谱影象的复合

本文探讨ＨＩＳ变换对数字化航空片影象与ｌａｎｄｓａｔ ＴＭ多光谱影象进行复合的方法，并在此基础上提出一种改进的方法。试验结果表明本文提出的方法是一种非常行之有效的方法。复合后的影象不仅保留了ＴＭ影像的光谱特征，而且将其空间分解力由３０ｍ提高到１０ｍ，清晰度也提高了。因而复合后的影像能提高分类精度，制作专题图的精度、多时相监测能力和解译水平等。