数字式定温热偶真空计

本文介绍了一种新的数字式定温热偶真空计，它具有精度高、工作可靠、结构简单、操作方便等优点。文中具体阐述了微机系统的工作原理，并提供了结构原理框图。概述了研制中的关键技术问题，即用微机软件对非线性进行补偿的方法。最后介绍了该真空计的主要算法及应用实例。     

激光超塑性成型技术研究

本文探讨了激光超塑成型技术中所涉及的合金板材制备、光能耦合及成型工艺，给出了标样拉伸实验和实际工件成型的结果，并对金相组织进行了分析．     

K418B合金细晶铸造整体涡轮真空热处理工艺研究

通过力学性能评估和金相组织观察，研究五种热处理制度，两个周期的试验结果，确定了Ｋ４１８Ｂ合金细晶铸造整体涡轮的真空热处理工艺。     

第二套常减压装置低温热回收技术的应用

常减压装置低温余热较多.利用较少,造成热量损失。利用初顶油气、稳定石脑油等低温余热加热除盐水建立热水站,在节汽、节电等方面取得了较好的效果。     

活性碳和5A分子筛的吸附特性及其在真空获得中的作用

评述了活性碳和５Ａ分子筛的吸附等温线及其在真空佩温绝热夹层真空获得中的作用。分析了真空夹层抽真空除气时用Ｎ＿２气置换以及用“多次吸附－脱附Ｎ＿２气”方法活化吸附剂等先进工艺的机理。论述了根据吸附剂吸水的吸附等温线，合理确定活化工艺条件的方法。     

中置式高压电容器柜改进设计

分析了南屯煤矿白马河风井变电所高压电容器柜原设计方案存在的问题,并对其进行了改进设计:选用适用于容性负载的真空断路器;添加放电线圈,并将放电线圈与电容器直接并联,使放电线圈与电容器组成一个完整的放电回路;添加接地开关,接地开关既有机械闭锁又有电气联锁,操作方便,安全性高。实际应用表明,改进设计后的高压电容器柜功能更加完善,更加安全、可靠。     

Fabrication of Nano-TiO2 Coating for Dye-Sensitized Solar Cell by Vacuum Cold Spraying at Room Temperature

Deposition of nanocrystalline TiO₂ coating at low temperature is becoming more attractive due to the possibility for continuous roll production of the coating for assembly lines of dye-sensitized solar cell (DSC) at a low cost. In this study, porous nano-TiO₂ coating was deposited by vacuum cold spraying (VCS) at room temperature on a conducting glass substrate using commercial P25 nanocrystalline TiO₂ powder. The microstructure of TiO₂ coating was characterized by field emission scanning electron microscopy (FESEM) and nitrogen adsorption test. A commercial dye (N719) was adsorbed on the surface of TiO₂ particles within the coating to assemble a DSC. The cell performance was evaluated by employing simulated solar light at an intensity of 100 mW/cm². The results showed that TiO₂ coating was deposited by the agglomerates of nano-TiO₂ powders. The Brunauer-Emmett-Teller (BET) test of the as-sprayed TiO₂ coating yielded a porosity of 49% and an average pore size of 17 nm. The assembled solar cell yielded a short-circuit current density of 7.3 mA/cm² and an energy conversion efficiency of 2.4%. The test results indicate that VCS was a promising method to deposit nanocrystalline TiO₂ coatings at low temperature applied to DSCs. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.     

我国压力铸造技术的现状与发展

概述了压力铸造技术的特点,总结了目前中国压铸技术与国外的差距,分析了我国压铸业面临的机遇和挑战,论述了压力铸造技术的新工艺以及今后压力铸造的研发方向.     

强流脉冲离子束表面再制造技术原理与应用

采用TEMP-6型强流脉冲离子束(HIPIB)装置开展了HIPIB表面再制造技术的研发.HIPIB装置主体由高压脉冲电源系统和高功率离子二极管系统组成,通过高压短脉冲在二极管中放电产生阳极等离子体并引出ns级强流离子束.HIPIB辐照材料表面,发生显著的熔融、蒸发和剧烈烧蚀,物质喷射的反冲作用在辐照表面形成由表及里的应力波,导致材料表层强烈的热-力学效应.利用HIPIB与材料表面的相互作用,应用于涡轮叶片表面的清洗维修,可有效去除涡轮叶片基体因高温氧化形成的氧化物,伴随表层的重熔将叶片基体表面微观缺陷焊合,获得了光滑、平整的涡轮叶片修复表面.实现了HIPIB辐照在涡轮叶片表面再制造方面的应用.